Influence of WC particle content of Fe-based powder-cored wire on microstructure and properties of plasma cladding reinforced layers
Source abstract
Abstract
The plasma arc cladding process with Fe-based powder-cored wire used to efficiently clad tungsten carbide (WC)-reinforced Fe-based layers on stainless steel is proposed. WC-Fe compound cladding layers on stainless steel were deposited with Fe-based powder-cored wire containing 10%, 20%, 30% or 45% WC particles. Then the macroscopic morphology, microstructure, microhardness and wear performance were characterized in detail. The cladding layers were mainly composed of austenite, but with the increasing WC content, the microstructure of the cladding layers become finer, and α-Fe, Fe 3C, Cr 7C 3, Fe 3W 3 C and residual WC contents gradually rose. The addition of WC can significantly refine the grain size. The low-angle boundary content increased from 14.47% to 71.92%, and the average grain size decreased by 50% from 63.2 to 31.6 µm, which resulted in a significant increase in the hardness and wear resistance of the cladding layers. The average microhardness rose by 38% from 349.0 to 482.1 HV. The wear resistance improved significantly.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Mechanical and microstructural properties of WC-based cermets: a comparative study on the effect of Ni and Mo binder phases10.1016/j.ceramint.2017.10.189 ↗
2. Influence of rare-earth element doping on interface and mechanical properties of WC particles reinforced steel matrix composites
3. Fabrication and characterization of WC-HEA cemented carbide based on the CoCrFeNiMn high entropy alloy10.1016/j.jallcom.2018.02.292 ↗
4. The effect of volume fraction of WC particles on erosion resistance of WC reinforced Fe matrix surface composites10.1016/S0043-1648(03)00290-4 ↗
5. Influence of size and volume share of WC particles on the properties of sintered metal matrix composites10.1016/j.apt.2019.01.013 ↗
6. Trends in the P/M hard metal industry10.1016/j.ijrmhm.2014.07.007 ↗
7. Complexions and grain growth retardation: First-principles modeling of phase boundaries in WC-Co cemented carbides at elevated temperatures10.1016/j.actamat.2021.117128 ↗
8. Preparation of WC Reinforced Co-Based Alloy Gradient Coatings on a H13 Mold Steel Substrate by Laser Cladding
9. Mechanical performance and residual stress of WC-Co coatings manufactured by Kinetic Metallization™10.1016/j.surfcoat.2021.127359 ↗
10. Wear and heat shock resistance of Ni-WC coating on mould copper plate fabricated by laser10.1016/j.jmrt.2020.05.083 ↗
11. Evaluation of the mechanical properties of WC-Ni composite coating on an AISI 321 steel substrate10.1016/j.optlastec.2020.106138 ↗
12. Laser hot-wire cladding of Ni/WC composite coatings with a tubular cored wire10.1016/j.jmatprotec.2021.117273 ↗
13. Production and indentation of WC/Fe-Mn as an alternative to cobalt-bonded hardmetals10.1016/S1044-5803(02)00181-X ↗
14. Effect of cobalt on the synthesis and sintering of WC-Co composite powders10.1016/j.jallcom.2018.06.367 ↗
15. Interactions between tungsten carbide (WC) particulates and metal matrix in WC-reinforced composites10.1016/S0921-5093(02)00173-9 ↗
16. Interplay of microstructure and mechanical properties of WC-6Co cemented carbides by hot oscillating pressing method10.1016/j.ceramint.2021.04.063 ↗
17. Wear properties and microstructural analyses of Fe-based coatings with various WC contents on H13 die steel by laser cladding10.1016/j.surfcoat.2019.04.063 ↗
18. WC-Fe metal-matrix composite coatings fabricated by laser wire cladding
19. Effect of Scanning Speed on the Interface Behavior and Dendrite Growth of Laser Remelted Fe-Based Ni/WC Coatings10.3390/coatings9100677 ↗
20. Effects of metal binder content and carbide grain size on the microstructure and properties of SPS manufactured WC-Fe composites10.1016/j.jallcom.2019.01.057 ↗
21. Comparative study of WC-based hard alloys fabrication via spark plasma sintering using Co, Fe, Ni, Cr, and Ti binders10.1016/j.ijrmhm.2021.105725 ↗
22. Effects of powder preparation and sintering temperature on consolidation of ultrafine WC-8Co tool material produced by spark plasma sintering10.1016/j.ceramint.2019.06.227 ↗
23. Laser additive manufactured WC reinforced Fe-based composites with gradient reinforcement/matrix interface and enhanced performance10.1016/j.compstruct.2018.03.008 ↗
24. Characterization of Fe-based surface multilayer-structured tungsten carbide composite layers by EBSD and FIB/TEM10.1016/j.surfcoat.2020.126365 ↗
25. Microstructures and high-temperature wear behavior of NiAl/WC-Fex coatings on carbon steel by plasma cladding10.1016/j.jallcom.2020.155850 ↗
26. WC reinforced surface metal matrix composite produced by plasma melt injection10.1016/j.surfcoat.2006.02.037 ↗
27. Laser cladding process of Fe/WC metal matrix composite coatings on low carbon steel using Yb: YAG disk laser10.1016/j.optlastec.2020.106784 ↗
28. Effect of laser remelting on microstructure and properties of WC reinforced Fe-based amorphous composite coatings by laser cladding10.1016/j.optlastec.2018.01.024 ↗
29. Inhibition of cracking by grain boundary modification in a non-weldable nickel-based superalloy processed by laser powder bed fusion10.1016/j.msea.2020.139745 ↗
30. Rapid control of phase growth by nanoparticles
31. Nanoparticle-inhibited growth of primary aluminum in Al-10Si alloys10.1016/j.actamat.2015.10.005 ↗
32. Grain boundary serration in nickel alloy inconel 600: quantification and mechanisms10.1016/j.actamat.2019.09.037 ↗