journal article·2022-07

Damping capacity and mechanical properties of Fe3Cr2NiCuAl medium entropy alloys by tuning phase constituents

Xiao-Nan Han, Qing-Feng Li, Hong-Ding Wang, Wei Zhang, Qing-Chun Xiang, Peng Gao, Ying-Lei Ren, Bo Yu, Ying-Dong Qu, Ke-Qiang Qiu

Publisher page

Abstract

A comprehensive analysis of the phase constituent, microstructure and mechanical/damping properties of Fe 3Cr 2NiCuAl x ( x = 0, 0.125, 0.25, 0.5) alloys by tuning the Al mole ratio is presented in the paper. The results show that the phase constitutions of the alloys are the face centered cubic (FCC) and body centered cubic (BCC) phases and the volume fractions of the two phases are changed with the Al content. For the alloys with the Al mole ratios of 0 and 0.125, the FCC phase predominates as the matrix and the FCC2 nanoparticles are precipitated in the matrix, while for the alloys with the Al mole ratios of 0.25 and 0.5, the BCC phase predominates as the matrix and the B2 nanoparticles are precipitated in the matrix. The highest damping capacity of 0.056 was found for the Fe 3Cr 2NiCuAl 0.25 alloy with 70.1 vol% of the BCC phase in the form of the dendrites and 29.9 vol% of the FCC phase in the form of the interdendrites. This alloy also has a high yield strength of 1069 MPa with the plastic strain being over 50% without fracture under compression.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Alloy design strategies and future trends in high-entropy alloys10.1007/s11837-013-0761-6 ↗
2. CoFe2NiMn0.3AlCux high-entropy alloy with excellent magnetic properties and good mechanical properties10.1007/s40195-021-01256-8 ↗
3. Transformation-enhanced strength and ductility in a FeCoCrNiMn dual phase high-entropy alloy10.1016/j.msea.2020.139182 ↗
4. Effect of FCC anti-ferromagnetic ordering on the stability of phases in Fe60-xMn30Cr10Cox high entropy alloys10.1016/j.jallcom.2020.153845 ↗
5. Damage-tolerant, corrosion-resistant high entropy alloy with high strength and ductility by laser powder bed fusion additive manufacturing
6. A nanocrystalline AlCoCuNi medium-entropy alloy with high thermal stability via entropy and boundary engineering10.1016/j.msea.2020.138925 ↗
7. Discovery and design of fatigue-resistant high-entropy alloys10.1016/j.scriptamat.2020.05.047 ↗
8. Effects of nanosized precipitates on irradiation behavior of CoCrFeNi high entropy alloys10.1016/j.jallcom.2020.158291 ↗
9. Structure and magnetodielectric properties of titanium substituted barium hexaferrites10.1016/j.ceramint.2021.03.041 ↗
10. Exploration of crystal structure, magnetic and dielectric properties of titanium-barium hexaferrites10.1016/j.mseb.2021.115345 ↗
11. Correlation between entropy state, crystal structure, magnetic and electrical properties in M-type Ba-hexaferrites10.1016/j.jeurceramsoc.2020.04.036 ↗
12. High entropy oxide phases with perovskite structure10.3390/nano10020268 ↗
13. Effect of annealing on microstructure and mechanical properties of Al0.5CoCrFeMoxNi high-entropy alloys10.3390/e20110812 ↗
14. Effect of aging on microstructure and property of AlCoCrFeMo0.05Ni2 high entropy alloy10.1016/j.msea.2019.05.058 ↗
15. Designing high entropy alloys with dual fcc and bcc solid-solution phases: structures and mechanical properties10.1007/s11661-019-05131-1 ↗
16. Effects of Ta addition on the microstructures and mechanical properties of CoCrFeNi high entropy alloy10.1016/j.matchemphys.2017.05.056 ↗
17. Microstructure and mechanical properties of Al–Co–Cr–Fe–Ni base high entropy alloys obtained using powder metallurgy10.1007/s12540-018-00236-5 ↗
18. On the understanding of damping capacity in SMA: from the material thermomechanical behaviour to the structure response10.1177/1045389X20974453 ↗
19. A novel high-entropy alloy with excellent damping property toward a large strain amplitude environment10.1016/j.jallcom.2019.06.247 ↗
20. A novel sandwich Fe-Mn damping alloy with ferrite shell prepared by vacuum annealing10.1088/1361-665X/aaaf95 ↗
21. Damping capacity, magnetic and mechanical properties of Fe-18Cr alloy10.1016/j.jmmm.2019.165777 ↗
22. The effect of the annealing temperature on the damping capacity under constant prestress, mechanical properties and microstructure of an Fe–11Cr-2.5Mo-0.1Zr-1.0Ni forged damping alloy10.1016/j.jallcom.2019.152429 ↗
23. Influence of alloy elements (Mo, Nb, Ti) on the strength and damping capacity of Fe-Cr based alloy10.1016/j.msea.2016.05.013 ↗
24. Mechanical property and damping capacity of ultrafine-grained Fe–13Cr–2Al–1Si alloy produced by equal channel angular pressing10.1016/j.msea.2017.04.018 ↗
25. Higher damping capacity induced by negative magnetostriction of Fe-16Cr-2.5Mo-0∼0.2V alloys10.1016/j.jallcom.2020.156673 ↗
26. Magnetic damping in epitaxial iron alloyed with vanadium and aluminum10.1103/PhysRevApplied.14.034042 ↗
27. Magneto-mechanical properties of Fe100-xAlx alloys (x = 14-27) prepared by directional solidification10.1016/j.jallcom.2020.156086 ↗
28. Damping of Fe-Al alloy electrodeposited in an ionic liquid10.1590/1980-5373-mr-2017-0805 ↗
29. Effect of alloying elements on microstructure, mechanical and damping properties of Cr-Mn-Fe-V-Cu high-entropy alloys10.1016/j.jmst.2018.02.026 ↗
30. Mechanical and damping properties of the multi-layer graphenes enhanced CrMnFeCoNi high-entropy alloy composites produced by powder metallurgy10.1016/j.matlet.2021.129682 ↗
31. AlxCrFeNi medium entropy alloys with high damping capacity10.1016/j.jallcom.2021.159991 ↗
32. A novel dual phase high entropy casting alloy with high damping capacity10.1088/2053-1591/abf390 ↗
33. High-temperature high-entropy alloys AlxCo15Cr15Ni70-x based on the Al-Ni binary system10.1016/j.msea.2018.03.058 ↗
34. Microstructure and mechanical properties of FeCoCrNiMnAlx high-entropy alloys prepared by mechanical alloying and hot-pressed sintering10.1016/j.jallcom.2018.10.168 ↗
35. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
36. The effect of Al content on microstructures and comprehensive properties in AlxCoCrCuFeNi high entropy alloys10.1016/j.vacuum.2018.12.009 ↗
37. Corrosion behavior of CuCrFeNiMn high entropy alloy system in 1 M sulfuric acid solution10.1002/maco.201106072 ↗
38. Microstructures and liquid phase separation in multicomponent CoCrCuFeNi high entropy alloys
39. Rapid precipitation in an Al0.5CrFeCoNiCu high entropy alloy10.1179/1743284715Y.0000000004 ↗
40. Alloying behavior, microstructure and mechanical properties in a FeNiCrCo0.3Al0.7 high entropy alloy10.1016/j.matdes.2013.04.061 ↗
41. Effect of lattice distortion on solid solution strengthening of BCC high-entropy alloys10.1016/j.jmst.2017.07.013 ↗
42. Structure formation and mechanical properties of the high-entropy AlCuNiFeCr alloy prepared by mechanical alloying and spark plasma sintering10.1016/j.jallcom.2019.01.341 ↗
43. Investigation of the effect of alloying elements on damping capacity and magnetic domain structure of Fe-Cr-Al based vibration damping alloys10.1016/j.jallcom.2016.10.297 ↗
44. Effect of Cu content on microstructure and properties of Fe-16Cr-2.5Mo damping alloy10.1016/j.jmst.2017.05.007 ↗