journal article·2022-07

Preparation and properties of Cu/RGO composites via H2 reduction and spark plasma sintering

Ruobing Zhao, Zhuangzhuang Liu, Zhihao Zhang

Publisher page

Abstract

In this work, copper/reduced graphene oxide (Cu/RGO) mixed powders were produced by using hydrogen-reduction (H 2 reduction) with graphene oxide (GO) and copper oxide powders as raw materials. The Cu/RGO composite was sintered through spark plasma sintering (SPS). The effects of RGO content and sintering conditions on the relative density, hardness and electrical conductivity of the composite were investigated. The results show that the GO and copper oxide powder can be reduced via H 2 reduction when sintered at 500 °C for 8 h. Moreover, as the content of RGO increases from 0 wt% to 0.67 wt%, the hardness and electrical conductivity increases firstly and then decrease. When the content of RGO is 0.33 wt%, the hardness and electrical conductivity of the composite reach the maximum, i.e., 98.6 HV and 80.5% IACS (International Annealed Copper Standard) respectively. The hardness and electrical conductivity are maximum for the composite sintered at 600 °C for 8 h. Further increase in sintering temperature lowers the properties of the composite. The Cu/RGO composites sintered at 600 °C achieved a relative density of 95.56%, with the high hardness of 193.9 HV and electrical conductivity of 89.8% IACS.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Graphene research and applications · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Stress relaxation behaviors and mechanical properties of precipitation strengthening copper alloys10.1016/j.jallcom.2020.158537 ↗
2. A high-performance copper-based brake pad for high-speed railway trains and its surface substance evolution and wear mechanism at high temperature
3. Advances in graphene reinforced metal matrix nanocomposites: mechanisms, processing, modelling, properties and applications10.1016/j.npe.2020.12.003 ↗
4. Macro copper-graphene composites with enhanced electrical conductivity10.1016/j.jallcom.2021.162477 ↗
5. Thermal properties of graphene/metal composites with aligned graphene10.1016/j.matdes.2017.11.048 ↗
6. A powder-metallurgy-based strategy toward three-dimensional graphene-like network for reinforcing copper matrix composites
7. Preparation of graphene nanoplatelets-copper composites by a modified semi-powder method and their mechanical properties10.1016/j.jallcom.2015.10.252 ↗
8. Synergistically enhanced interface stability by graphene assisted copper surface reconstruction
9. High acetic acid sensing performance of Mg-doped ZnO/rGO nanocomposites10.1016/j.ceramint.2018.12.205 ↗
10. The effects of S-doping concentration on the photocatalytic performance of SnSe/S-GO nanocomposites10.1016/j.apt.2020.12.013 ↗
11. The role of the Se-rich and Se-poor conditions in the photocatalytic performance of ZnSe/rGO nanocomposites
12. High strength and electrical conductivity of copper matrix composites reinforced by carbon nanotube-graphene oxide hybrids with hierarchical structure and nanoscale twins10.1016/j.diamond.2019.107537 ↗
13. Effect of graphene on thermal and mechanical properties of copper-titanium carbide composites10.1016/j.vacuum.2019.109100 ↗
14. Enhanced mechanical properties of graphene/copper nanocomposites using a molecular‐level mixing process10.1002/adma.201302495 ↗
15. Direct synthesis of high-quality graphene on Cu powders from adsorption of small aromatic hydrocarbons: A route to high strength and electrical conductivity for graphene/Cu composite10.1016/j.jallcom.2019.05.273 ↗
16. Mechanical properties of graphene nanoplates reinforced copper matrix composites prepared by electrostatic self-assembly and spark plasma sintering10.1016/j.msea.2018.10.067 ↗
17. Influence of spark plasma sintering temperature on the microstructure and strengthening mechanisms of discontinuous three-dimensional graphene-like network reinforced Cu matrix composites10.1016/j.msea.2019.04.032 ↗
18. Preparation of Ag/reduced graphene oxide reinforced copper matrix composites through spark plasma sintering: an investigation of microstructure and mechanical properties10.1016/j.ceramint.2020.02.142 ↗
19. In-situ generated graphene from wheat flour for enhancing mechanical and electrical properties of copper matrix composites
20. Raman spectroscopy of graphene and graphite: Disorder, electron–phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
21. Effect of CNTs content on the microstructures and properties of CNTs/Cu composite by microwave sintering10.1016/j.jallcom.2018.08.315 ↗
22. Effect of ball-milling and graphene contents on the mechanical properties and fracture mechanisms of graphene nanosheets reinforced copper matrix composites10.1016/j.jallcom.2016.08.303 ↗
23. Y. Gu, L. Hu. Effect of Graphene Addition on Microstructure and Properties of Graphene/Copper Composite. IOP Conference Series: Earth and Environmental Science, 2021: 032002.10.1088/1755-1315/651/3/032002 ↗
24. Strengthening effect of graphene derivatives in copper matrix composites10.1016/j.jallcom.2015.09.013 ↗