journal article·2022-07

UV-laser annealing for improved resistive switching performance and reliability of flexible resistive random-access memory

Seung Woo Han, Moo Whan Shin

Publisher page

Abstract

Flexible resistive random-access memory (RRAM) has attracted significant attention owing to the strong demand for various flexible electronic memory devices. However, fabricating reliable and flexible RRAM is a significant challenge because of the inherently high thermal sensitivity of plastic substrates. In this study, a high-performance flexible RRAM device was fabricated without deforming a plastic substrate by utilizing a precisely controlled UV laser annealing process. The application of laser annealing in an Al/ZnO/Al flexible RRAM changes the concentration of O Frenkel defect pairs in the ZnO layer and produce a ZnO/Al mixed interface layer with high quality oxygen reservoirs. The higher concentration of O Frenkel defect pairs in the ZnO layer induces electroforming-free process, and the improved characteristics such as crystallinity, morphology, and stoichiometry of the interface area result in stable resistive switching and performance enhancement in the flexible RRAM. The laser-annealed flexible RRAM exhibits a high on/off ratio (~1.07 × 10 4), high cycling endurance (up to 2.5 ×10 3 cycles), and low power consumption (4.88 µW in SET state and 1.21 µW in RESET state). Importantly, the performance was maintained at a bending radius of up to 5 mm.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Memory and Neural Computing · Transition Metal Oxide Nanomaterials · Ferroelectric and Negative Capacitance Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Resistive random access memory: a review of device challenges
2. Resistive random access memory (RRAM): an overview of materials, switching mechanism, performance, multilevel cell (mlc) storage, modeling, and applications10.1186/s11671-020-03299-9 ↗
3. Resistance random access memory10.1016/j.mattod.2015.11.009 ↗
4. Y. Chen, ReRAM: history, status, and future, 67, (2020), 1420–1433.10.1109/TED.2019.2961505 ↗
5. Highly ordered nanowire arrays on plastic substrates for ultrasensitive flexible chemical sensors10.1038/nmat1891 ↗
6. P. Wang, M. Hu, H. Wang, Z. Chen, Y. Feng, J. Wang, W. Ling, The evolution of flexible electronics: from nature, beyond nature, and to nature, 2001116, (2020), 1–29. 〈https://doi.org/10.1002/advs.202001116〉.10.1002/advs.202001116 ↗
7. S.H. Lim, B. Radha, J.Y. Chan, M.S.M. Saifullah, G.U. Kulkarni, G.W. Ho, Flexible palladium-based H2 sensor with fast response and low leakage detection by nanoimprint lithography, (2013).10.1021/am401624r ↗
8. Doping and design of flexible transparent electrodes for high-performance flexible organic solar cells: recent advances and perspectives10.1002/adfm.202102717 ↗
9. Emerging self-emissive technologies for flexible displays
10. A flexible nickel phthalocyanine resistive random access memory with multi-level data storage capability10.1016/j.jmst.2021.02.008 ↗
11. Forming-free flexible memristor with multilevel storage for neuromorphic computing by full PVD technique10.1016/j.jmst.2020.04.059 ↗
12. Theoretical investigation of CsBX3 (B = Pb, Sn; X = I, Br, Cl) using Tran–Blaha modified Becke–Johnson approximation for flexible photoresponsive memristors10.1002/adts.202100011 ↗
13. Highly improved switching properties in flexible aluminum oxide resistive memories based on a multilayer device structure10.1002/aelm.201800355 ↗
14. Sol-gel based zirconium dioxide dielectrics by oxygen-annealing at low temperature for highly stable and robust flexible resistive random access memory10.1016/j.jallcom.2020.154086 ↗
15. Ar ion plasma surface modification on the heterostructured TaOx/InGaZnO thin films for flexible memristor synapse10.1016/j.jallcom.2019.153625 ↗
16. Resistive switching characteristics and theoretical simulation of a Pt/a-Ta2O5/TiN synaptic device for neuromorphic applications10.1016/j.jallcom.2021.160204 ↗
17. Flexible resistive switching device based on the TiO2 nanorod arrays for non-volatile memory application10.1016/j.jallcom.2019.153552 ↗
18. Exploring the role of nitrogen incorporation in ZrO2 resistive switching film for enhancing the device performance10.1016/j.jallcom.2018.10.249 ↗
19. Effect of electrode area on resistive switching behavior in translucent solution-processed AlOx based memory device10.1016/j.jallcom.2019.153603 ↗
20. Zinc oxide thin films for memristive devices: a review10.1080/10408436.2016.1192988 ↗
21. Status and prospects of ZnO-based resistive switching memory devices10.1186/s11671-016-1570-y ↗
22. Switching the electrical characteristics of TiO2 from n-type to p-type by ion implantation10.1016/j.apsusc.2021.150274 ↗
23. Improved switching and synapse characteristics using PEALD SiO2 thin film in Cu/SiO2/ZrO2/Pt device10.1016/j.apsusc.2021.149140 ↗
24. Tuning oxygen vacancies and resistive switching properties in ultra-thin HfO2 RRAM via TiN bottom electrode and interface engineering10.1016/j.apsusc.2021.149386 ↗
25. G.Z. Rram, S. Ha, H. Lee, W. Lee, B. Jang, H. Kwon, K. Kim, J. Jang, Effect of annealing environment on the performance, (2019).
26. Annealed AlOx film with enhanced performance for bipolar resistive switching memory10.1016/j.apsusc.2021.149094 ↗
27. A novel high-performance and energy-efficient RRAM device with multi-functional conducting nanofilaments10.1016/j.nanoen.2020.105717 ↗
28. The influence of annealing temperature on ReRAM characteristics of metal/NiO/metal structure10.1088/1757-899X/8/1/012034 ↗
29. n-situ nanoscale characterization of annealing effect on TiN/Ti/HfOx/TiN structure for resistive random access memory (ReRAM)
30. Annealed AlOx film with enhanced performance for bipolar resistive switching memory10.1016/j.apsusc.2021.149094 ↗
31. Role and optimization of thermal rapid annealing in Ta/TaOx/Ru based resistive switching memory10.1016/j.vacuum.2021.110392 ↗
32. S. Maejima, M. Uchida, M. Noda, Control of leakage current through BaTiO3 film by cumulative cycle of applied voltage scanning for ReRAM or neuromorphic application, 2018 IEEE ISAF-FMA-AMF-AMEC-PFM Jt. Conf. IFAAP 2018, (2018), 6–8. 〈https://doi.org/10.1109/ISAF.2018.8463232〉.10.1109/ISAF.2018.8463232 ↗
33. Annealing effect on forming-free bipolar resistive switching characteristics of sol-gel WOx resistive memories with Al conductive bridges10.1016/j.jallcom.2021.160758 ↗
34. Effects of Si interlayer on resistance switching of Pt/Si/TiO[sub 2]/Pt structures
35. Effect of annealing temperature for Ni/AlOx/Pt RRAM devices fabricated with solution-based dielectric10.3390/mi10070446 ↗
36. Structural, optical, electrical and resistive switching properties of ZnO thin films deposited by thermal and plasma-enhanced atomic layer deposition10.1016/j.apsusc.2013.05.141 ↗
37. Enhanced performance in Al-doped ZnO based transparent flexible transparent thin-film transistors due to oxygen vacancy in ZnO film with Zn-Al-O interfaces fabricated by atomic layer deposition10.1021/acsami.7b02609 ↗
38. Growth characteristics and properties of Al-doped ZnO thin films by DC magnetron sputtering from AZOY® target10.1139/tcsme-2013-0020 ↗
39. Generating heat with metal nanoparticles10.1016/S1748-0132(07)70017-8 ↗
40. Gold nanoparticle ensembles as heaters and actuators: melting and collective plasmon resonances10.1007/s11671-006-9015-7 ↗
41. Laser annealing of gold nanoparticles thin film using photothermal effect10.1016/j.mee.2008.12.058 ↗
42. Selective photo-thermal modulation of ZnO/Pt interface for monolithic 3D integration of oxide-based resistive random access memory10.1016/j.apsusc.2020.146380 ↗
43. Ultrafast switching in wetting properties of TiO2/YSZ/Si(001) epitaxial heterostructures induced by laser irradiation10.1063/1.4790327 ↗
44. Modification of properties of yttria stabilized zirconia epitaxial thin films by excimer laser annealing10.1021/am506298y ↗
45. Role of interface reaction on resistive switching of metal/amorphous TiO2/Al RRAM devices10.1149/1.3622295 ↗
46. Forming-free grain boundary engineered hafnium oxide resistive random access memory devices
47. Voltage-dependent dielectric breakdown and voltage-controlled negative resistance in anodized [formula omitted] diodes10.1063/1.1287116 ↗
48. A study of roughness improvement of Al2O3 substrates using sol-gel method10.1016/j.proeng.2015.09.224 ↗
49. Characterization of oxide barrier layers prepared by atomic layer deposition10.1177/1687814017711809 ↗
50. Effect of annealing treatment on the structure and performance of transparent conductive AZO/Al2O3 bi-layer films
51. On the effect of atomic layer deposited Al2O3 on the environmental degradation of hybrid perovskite probed by positron annihilation spectroscopy10.1039/C8TC06330C ↗
52. P. Li, J. Ma, H. Xu, X. Xue, Y. Liu, Highly stable copper wire/alumina/polyimide composite films for stretchable and transparent heaters, (2016), 3581–3591. 〈https://doi.org/10.1039/c5tc04276c〉.10.1039/C5TC04276C ↗