journal article·2022-05

Influence of current density on microstructure and dielectric properties during the flash sintering of strontium titanate ceramics

Tao Ouyang, Yongping Pu, Xin Li, Jiamin Ji, Shiyu Zhou, Chenpu He, Bo Wang

Publisher page

Abstract

Flash sintering (FS), as a novel sintering technique, has enormous potential in taking powder particles into dense ceramics. Here, dense SrTiO 3 ceramics with small grain size and excellent electrical properties ( ε = 453, tan δ = 0.002) can be flash sintered at furnace temperature of 1145 ℃ via combining a field of 150 V/cm and a current density of 40 mA/mm 2. The effect of current density limits on the microstructure morphology, density, phase structure and dielectric properties of SrTiO 3 ceramics is investigated. It is shown that the current density parameter is of great importance in the control of the densification behavior and grain growth during flash sintering: the grain size increases gradually with raising the current density, while the density increases first and then slightly decreases. Moreover, the onset temperature of flash sintering and phase structure is independent of the current density in this experiment. These ceramics exhibit a satisfactory correspondence between electrical properties and structure. Based on the black-body radiation analysis, the ability of Joule heating to cause flash sintering is limited. Thus, the avalanche multiplication model was combined to help understand the origin of flash sintering.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric properties of ceramics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Flash sintering of nanograin zirconia in<5 s at 850 °C10.1111/j.1551-2916.2010.04089.x ↗
2. Microwave sintering of alumina at 2.45 GHz10.1111/j.1151-2916.2003.tb03467.x ↗
3. The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method10.1007/s10853-006-6555-2 ↗
4. Unveiling the mechanisms of cold sintering of ZnO at 250 °C by varying applied stress and characterizing grain boundaries by Kelvin probe force microscopy10.1016/j.actamat.2017.10.055 ↗
5. Flash sintering of barium titanate10.1016/j.ceramint.2018.12.211 ↗
6. A general method to synthesize and sinter bulk ceramics in seconds10.1126/science.aaz7681 ↗
7. Emergence and extinction of a new phase during on-off experiments related to flash sintering of 3YSZ10.1111/jace.13476 ↗
8. Electric field assisted sintering of cubic zirconia at 390 °C10.1111/jace.12281 ↗
9. Densification kinetics during isothermal sintering of 8YSZ10.1016/j.jeurceramsoc.2015.11.041 ↗
10. Preliminary investigation of flash sintering of SiC10.1016/j.jeurceramsoc.2013.04.023 ↗
11. Thermal runaway, flash sintering and asymmetrical microstructural development of ZnO and ZnO-Bi2O3 under direct currents10.1016/j.actamat.2015.04.018 ↗
12. Flash-sintering of Co2MnO4 spinel for solid oxide fuel cell applications10.1016/j.jpowsour.2010.10.036 ↗
13. Current-rate flash sintering of gadolinium doped ceria: microstructure and defect generation10.1016/j.actamat.2020.02.036 ↗
14. Flash sintering of alumina: effect of different operating conditions on densification10.1016/j.jeurceramsoc.2016.03.021 ↗
15. Field-assisted sintering of undoped BaTiO3: microstructure evolution and dielectric permittivity10.1016/j.jeurceramsoc.2014.04.041 ↗
16. Microstructure and microchemistry of flash sintered K0.5Na0.5NbO310.2109/jcersj2.15290 ↗
17. Flash sintering as a nucleation phenomenon and a model thereof10.1016/j.jeurceramsoc.2014.04.043 ↗
18. Beyond flash sintering in 3 mol% yttria stabilized zirconia10.2109/jcersj2.15248 ↗
19. Investigation of electrochemical, optical and thermal effects during flash sintering of 8YSZ10.3390/ma11071214 ↗
20. On the mixed ionic and electronic conductivity in polarized yttria stabilized zirconia10.1016/j.ssi.2018.03.014 ↗
21. Electrical characteristics of flash sintering: thermal runaway of Joule heating10.1016/j.jeurceramsoc.2014.12.022 ↗
22. Predicting the onset of flash sintering10.1111/jace.13679 ↗
23. Influence of the field and the current limit on flash sintering at isothermal furnace temperatures10.1111/jace.12472 ↗
24. Effect of electrical field/current on sintering of fully stabilized zirconia10.1111/j.1551-2916.2011.04980.x ↗
25. Flash sintering of 3YSZ and in-situ joining with 304 stainless steel using copper as an interlayer10.1016/j.scriptamat.2020.113709 ↗
26. Effect of the current density on the densification of 3 mol% yttria-stabilized zirconia in flash sintering10.1016/j.jallcom.2020.154061 ↗
27. Review of flash sintering: materials, mechanisms and modelling10.1080/17436753.2016.1251051 ↗
28. A comparison of power controlled flash sintering and conventional sintering of strontium titanate10.1016/j.scriptamat.2016.12.008 ↗
29. Defect structure of flash-sintered strontium titanate10.1111/j.1551-2916.2012.05240.x ↗
30. Electrical conduction mechanism in bulk ceramic insulators at high voltages until dielectric breakdown10.1063/1.4917208 ↗
31. A first report of photoemission in experiments related to flash sintering10.1111/jace.13130 ↗
32. Electroluminescence and the measurement of temperature during stage III of flash sintering experiments10.1016/j.jeurceramsoc.2015.03.040 ↗
33. The effect of electric field on sintering and electrical conductivity of Titania10.1111/jace.12682 ↗
34. Influence of externally imposed and internally generated electrical fields on grain growth, diffusional creep, sintering and related phenomena in ceramics10.1111/j.1551-2916.2011.04652.x ↗
35. Effect of grain size on the energy storage properties of (Ba0.4Sr0.6)TiO3 paraelectric ceramics10.1016/j.jeurceramsoc.2013.11.039 ↗
36. High energy density, temperature stable lead-free ceramics by introducing high entropy perovskite oxide10.1016/j.cej.2021.131684 ↗
37. Dielectric relaxation behavior and energy storage properties in SrTiO3 ceramics with trace amounts of ZrO2 additives10.1016/j.ceramint.2014.05.147 ↗
38. Enhanced dielectric breakdown strength and ultra-fast discharge performance of novel SrTiO3 based ceramics system10.1016/j.jallcom.2020.154611 ↗
39. Electroceramics: characterization by impedance spectroscopy10.1002/adma.19900020304 ↗
40. Ultralow dielectric loss in Y-doped SrTiO3 colossal permittivity ceramics via designing defect chemistry10.1111/jace.17385 ↗
41. Dielectric and impedance spectroscopic study of lithium doped potassium tantalum niobium oxide10.1016/j.ceramint.2019.05.267 ↗
42. Comparative study on structure, dielectric, and piezoelectric properties of (Na0.47Bi0.47Ba0.06)0.95A0.05TiO3 (A = Ca2+/Sr2+ ceramics: effect of radii of A-site catio10.1016/j.jeurceramsoc.2018.03.011 ↗
43. Grain boundary engineering that induces ultrahigh permittivity and decreased dielectric loss in CdCu3Ti4O12 ceramics10.1111/jace.16821 ↗
44. Effect of ferroelectric Ba0.8Sr0.2TiO3 on the charge carrier separation of BiOBr at different temperature10.1016/j.apsusc.2021.149366 ↗
45. Optimizing the energy storage and charge-discharge performance of borate glass-ceramics by adjusting the glass structure
46. Enhancing the energy storage properties of Ca0.5Sr0.5TiO3-based lead-free linear dielectric ceramics with excellent stability through regulating grain boundary defects10.1039/C9TC04738G ↗
47. Ultra-high energy storage performance under low electric fields in Na0.5Bi0.5TiO3-based relaxor ferroelectrics for pulse capacitor applications10.1016/j.ceramint.2019.08.238 ↗
48. Magnetic core-shell MnFe2O4@TiO2 nanoparticles decorated on reduced graphene oxide as a novel adsorbent for the removal of ciprofloxacin and Cu(II) from water10.1016/j.apsusc.2020.148400 ↗
49. Dielectric properties and high-temperature dielectric relaxation of Ba3Ti4Nb4O21 ceramic10.1016/j.matchemphys.2013.09.031 ↗
50. Oxygen-vacancy-related low-frequency dielectric relaxation and electrical conduction in Bi:SrTiO310.1103/PhysRevB.62.228 ↗
51. Dielectric relaxation in Zr-doped SrTiO3 ceramics sintered in N2 with giant permittivity and low dielectric loss10.1111/jace.13288 ↗
52. Chapter 5 - electrical breakdown in gases, solids and liquids
53. Bhat · 2018
54. Correlation between flash sintering and dielectric breakdown behavior in donor-doped barium titanate ceramics10.1016/j.ceramint.2020.02.055 ↗
55. Monte Carlo calculation of electron initiated impact ionization in bulk zinc-blende and wurtzite GaN10.1063/1.364213 ↗
56. Theory of hole initiated impact ionization in bulk zincblende and wurtzite GaN10.1063/1.365392 ↗
57. Pichler · 2004 · 255
58. The influence of doping on flash sintering conditions in SrTi1−xFexO3−δ10.1016/j.jeurceramsoc.2016.07.037 ↗