journal article·2022-03

Enhanced mechanical properties of tungsten alloy by synergistic strengthening of flaky Ni3Al and Al2O3 nano-particles

Ruipeng Mao, Zhishuai Fan, Daoping Xiang

Publisher page

Abstract

Abstract Tungsten alloys are extensively applied in kinetic energy penetrators but these alloys exhibit poor self-sharping properties—connected with high thermal conductivity, large grain size, and low hardness—which limit their application. Ni3Al is one of the most promising candidates as a binder phase for tungsten alloys used as kinetic energy penetrators because of its high hardness, low thermal conductivity, and low solubility of tungsten, which can refine the tungsten grain. In this study, a simple and scalable methodology, termed ‘synergistic strengthening with flaky binder phase and ceramic nano-particles’, has been developed to fabricate high-performing W-Ni3Al alloys. The flaky Ni3Al binder phase acted as a ductile layer to improve the mechanical properties of the alloy by crack deflection and tip blunting. The in-situ formed nano Al2O3 particles on the interface between the W and Ni3Al phase inhibited the dislocation motion and restrained the dissolution and re-precipitation of the tungsten grain, leading to grain refining of the tungsten and alloy strengthening. As a result, a unique structural W-Ni3Al alloy was prepared with an approximately 2 µm tungsten grain size, and its bending strength was improved by 24.3% in comparison to conventional W-Ni3Al alloys, and the hardness of greater than 70 HRA remained constant. Moreover, it was exciting that the higher bending strength could be obtained by regulating the W-Ni3Al alloy microstructure. In short, we demonstrated that this structural design strategy was an effective method to fabricate refractory alloys, such as tungsten alloys, with good overall mechanical performance. Data availability Data generated or analyzed during this study are included in this published article
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Intermetallics and Advanced Alloy Properties · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Sintering atmosphere effects on the ductility of W-Ni-Fe heavy metals10.1007/BF02644206 ↗
2. Preparation and properties of heavy metals
3. Processing strategy for consolidating tungsten heavy alloys for ordnance applications10.1016/S0254-0584(00)00426-0 ↗
4. Effect of Mn/Ni ratio variation on microstructure of W-Ni-Mn alloy10.1179/174329007X204885 ↗
5. Preparation and mechanical properties of WC-10Ni3Al cemented carbides with plate-like triangular prismatic WC grains10.1016/j.jallcom.2012.07.131 ↗
6. Griffo · 1996
7. Study on microstructure and mechanical properties of W-Ni3Al alloys prepared by ball milling and two-step sintering
8. Fabrication, characterization,and mechanical properties of 93W-4.9Ni-2.1Fe/95W-2.8Ni-1.2Fe-1Al2O3 heavy alloy composites10.1016/j.msea.2015.04.026 ↗
9. Fabricating fine-grained tungsten heavy alloy by spark plasma sintering of low-energy ball-milled W-2Mo-7Ni-3Fe powders10.1016/j.msea.2013.04.065 ↗
10. Fine-grained 93W-5.6Ni-1.4Fe heavy alloys with enhanced performance prepared by spark plasma sintering10.1016/j.msea.2013.02.069 ↗
11. Effect of processing parameters on microstructure and mechanical properties of 90W–6Ni-4Mn heavy alloy10.1016/j.ijrmhm.2014.09.024 ↗
12. Effect of two-time sintering process on microstructure and mechanical properties of ODS tungsten heavy alloy10.1016/j.msea.2007.01.118 ↗
13. Playing with defects in metals10.1038/nmat4929 ↗
14. A flake powder metallurgy approach to Al2O3/Al biomimetic nanolaminated composites with enhanced ductility10.1016/j.scriptamat.2011.05.022 ↗
15. Bioinspired hierarchical Al2O3/Al laminated composite fabricated by flake powder metallurgy10.1016/j.compositesa.2020.106187 ↗
16. Laminated nanostructure composites with improved bend ductility and toughness10.1016/j.scriptamat.2009.08.034 ↗
17. Unprecedented simultaneous enhancement in damage tolerance and fatigue resistance of zirconia/Ta composites10.1038/srep44922 ↗
18. Preparation of Ni3Al bonded diamond core drill with Ni-Cr alloy and its performance on glass-ceramic10.1016/j.ceramint.2018.09.113 ↗
19. Design of an efficient flake powder metallurgy route to fabricate CNT/ 6061Al composites10.1016/j.matdes.2018.01.044 ↗
20. Achieving enhanced strength in ultrafine lamellar structured Al2024 alloy via mechanical milling and spark plasma sintering10.1016/j.msea.2017.01.060 ↗
21. Initial oxidation behavior of Ni3Al (210) surface induced by supersonic oxygen molecular beam at room temperature10.1016/j.apsusc.2016.01.259 ↗
22. Strong and ductile particulate reinforced ultrafine-grained metallic composites fabricated by flake powder metallurgy10.1016/j.scriptamat.2012.11.024 ↗
23. Effect of oxide dispersoids addition on mechanical properties of tungsten heavy alloy fabricated by mechanical alloying process10.1016/j.msea.2006.10.155 ↗
24. Fangfang He, Influence of flake thickness on the shape and distribution of Al2O3 particles in Al matrix composites fabricated by flake powder metallurgy10.1016/j.scriptamat.2013.12.019 ↗
25. Fabrication of biomimetic titanium laminated material using flakes powder metallurgy10.1007/s10853-018-2086-x ↗
26. Shell-like nanolayered Nb4AlC3 ceramic with high strength and toughness10.1016/j.scriptamat.2010.12.045 ↗
27. Effect of two-time spark plasma sintering on microstructure and mechanical properties of W-6Ni-4Mn alloy10.1016/j.msea.2018.12.109 ↗
28. Microstructure evolution and mechanical properties of spark plasma sintered W-Ni-Mn alloy10.1016/S1003-6326(17)60180-8 ↗