Effect of equal channel angular pressing on microstructure evolution and properties variations of a CuCrZrY alloy
Source abstract
Abstract
Abstract The microstructural evolutions and properties variations of a CuCrZrY alloy processed by equal channel angular pressing (ECAP) with different passes were studied systematically. After 4 passes of ECAP, the average grain size was decreased to 500 nm, and the grain size distribution became more uniform during the subsequent processing. After 8 passes ECAP-ed and aged at 400 °C for 7 h, the samples’ tensile strength and electrical conductivity are 560 MPa and 86.4%IACS. The main strengthening mechanisms are precipitation strengthening, low-angle grain boundary strengthening, and high-angle grain boundary strengthening (about 82% in total). Finite element simulation was carried out through ABAQUS to obtain the equivalent strain distribution diagram of ECAP, resulting in that the strain force of the outer region was less than that of the inner one. The inconsistency of deformation leads to the inhomogeneity of microstructure. These findings will effectively guide researchers to develop high-strength high-electrical conductivity copper alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Nanostructures and nanoprecipitates induce high strength and high electrical conductivity in a CuCrZr alloy10.1016/j.jmst.2019.12.022 ↗
2. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
3. Producing bulk ultrafine-grained materials by severe plastic deformation
4. Two-stage Hall-Petch relationship in Cu with recrystallized structure10.1016/j.jmst.2019.12.023 ↗
5. Structure and mechanical properties of severely deformed Cu-Cr-Zr alloys produced by accumulative roll-bonding process10.4028/www.scientific.net/MSF.584-586.791 ↗
6. Competition between precipitation and dissolution in Cu-Ag alloys under high pressure torsion10.1016/j.actamat.2016.09.024 ↗
7. Wear resistance and electroconductivity in a Cu-0.3Cr-0.5Zr alloy processed by ECAP10.1007/s10853-016-0331-8 ↗
8. On the microstructure and texture of Cu-Cr-Zr alloy after severe plastic deformation by ECAP
9. Thermal stability of ECAP processed pure copper10.1016/j.msea.2007.01.042 ↗
10. EBSD analysis of grain-refinement mechanisms operating during equal-channel angular pressing of commercial-purity titanium10.1016/j.actamat.2019.05.014 ↗
11. Plastic flow during equal-channel angular pressing with arbitrary tool angles10.1016/j.ijplas.2020.102755 ↗
12. Analysis of plastic deformation behavior of ultrafine-grained aluminum processed by the newly developed ultrasonic vibration enhanced ECAP: simulation and experiments10.1016/j.jmapro.2020.01.010 ↗
13. Analysis and simulation for shape control effects of square aluminum tube during ECAP10.1007/s00170-020-05489-2 ↗
14. Numerical simulation and experimental investigation of pure copper deformation behavior for equal channel angular pressing/extrusion process10.1016/j.commatsci.2008.03.032 ↗
15. Comparison of dislocation density based approaches for prediction of defect structure evolution in aluminium and copper processed by ECAP10.1016/j.msea.2015.02.019 ↗
16. 3D FEM simulations for the homogeneity of plastic deformation in Al-Cu alloys during ECAP10.1016/j.msea.2009.10.032 ↗
17. Microstructure and mechanical properties of an ITER-grade Cu-Cr-Zr alloy processed by equal channel angular pressing10.1016/j.fusengdes.2015.06.180 ↗
18. Optimization of strength, ductility and electrical conductivity of Cu-Cr-Zr alloy by combining multi-route ECAP and aging10.1016/j.msea.2015.09.111 ↗
19. Effect of equal channel angular pressing on microstructure and mechanical properties of a Cu-Mg alloy10.3390/cryst10060426 ↗
20. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
21. Aging strengthening in rapidly solidified Cu-Cr-Sn-Zn alloy
22. Local deformation heterogeneity in cyclically deformed interstitial free steel10.1111/ffe.12338 ↗
23. Local intragranular misorientation accelerates corrosion in biodegradable Mg10.1016/j.actbio.2019.10.036 ↗
24. Influence of ECAP routes on the microstructure and properties of pure Ti10.1016/S0921-5093(00)01411-8 ↗
25. Optimization of microstrucutre for superplasticity using equal-channel angular pressing10.4028/www.scientific.net/MSF.304-306.97 ↗
26. Evaluation of dynamic development of grain structure during friction stir welding of pure copper using a quasi in situ method10.1016/j.jmst.2019.01.018 ↗
27. Effects of minor rare earths on the microstructure and properties of Cu-Cr-Zr alloy10.1016/j.jallcom.2020.155762 ↗
28. Contribution of Zr to strength and grain refinement in Cu-Cr-Zr alloy10.1016/j.msea.2019.04.053 ↗
29. Microstructure and properties of powder metallurgy Cu-1%Cr-0.65%Zr alloy prepared by hot pressing10.1016/j.vacuum.2016.06.008 ↗
30. Microstructure and properties of a novel Cu-Ni-Co-Si-Mg alloy with super-high strength and conductivity10.1016/j.msea.2018.12.075 ↗
31. Grain size dependence of the strength of metals: the Hall-Petch effect does not scale as the inverse square root of grain size10.1016/j.ijplas.2013.07.004 ↗
32. A modified Hall-Petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing10.1016/j.scriptamat.2012.02.008 ↗
33. Effects of Mg addition on the microstructure and softening resistance of Cu-Cr alloys10.1016/j.msea.2020.139009 ↗
34. Microstructure and properties of Cu-Mg-Ca alloy processed by equal channel angular pressing10.1016/j.jallcom.2019.01.335 ↗
35. Effect of magnesium on microstructure and properties of Cu-Cr alloy10.1016/j.jallcom.2018.04.159 ↗
36. Optimization of the balance between high strength and high electrical conductivity in CuCrZr alloys through two-step cryorolling and aging10.1016/j.jallcom.2018.09.040 ↗
37. Effect of thermomechanical treatment on microstructure and properties of Cu-Cr-Zr-Ag alloy10.1007/s12598-011-0444-9 ↗
38. Structure and crystallographic texture in the Cu-Cr-Ag alloy subjected to severe plastic deformation
39. Microstructure and properties of Cu-1.0Cr-0.2Zr-0.03Fe alloy10.1016/j.msea.2008.07.061 ↗
40. Effect of Ag addition on the microstructure and mechanical properties of Cu-Cr alloy10.1016/j.msea.2018.04.077 ↗