journal article·2022-01

Highly uniform resistive switching properties of NiFe2O4 films by embedding well-ordered pyramid-shaped Pt/Au nanostructures

Jiacheng Li, Chuangye Yao, Wenhua Huang, Ni Qin, Dinghua Bao

Publisher page

Abstract

Abstract Switching instability significantly affects the development of resistive random access memories. An enhanced resistive switching uniformity was developed by embedding well-ordered Pt/Au nanostructures (NSs) in Pt/NiFe2O4/Pt devices. The well-ordered Pt/Au NSs arrays were developed on Pt/Ti/SiO2/Si substrates using 2D colloidal crystals as the deposition templates. The NiFe2O4 (NFO) thin films were then deposited on the Pt/Au NSs array via a spin coating technique, followed by annealing treatment. The memory devices were fabricated via Pt top electrode sputtering on the NFO film surface. The embedded device showed more uniform SET and RESET voltages and lower forming voltage than the non-embedded device. Distortion of electric field and temperature gradient around the Pt/Au NSs suppresses the random development of conductive filaments (CFs). Furthermore, the temperature gradient near the Au NSs could be relatively high during the forming process than in Pt NSs since Au has high thermal conductivity, promoting oxygen vacancy migration. Therefore, CFs easily nucleate in HRS and develop near Au NSs under the same bias voltage, leading to better resistive switching properties in the Au NSs array device than in the Pt NSs array device. This study provides an effective path for enhancing the resistive switching performances of devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Memory and Neural Computing · Transition Metal Oxide Nanomaterials · Ferroelectric and Negative Capacitance Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Waser · 2010 · 158
2. Who wins the nonvolatile memory race?10.1126/science.1153909 ↗
3. Redox‐based resistive switching memories–nanoionic mechanisms, prospects, and challenges10.1002/adma.200900375 ↗
4. Memristive switching mechanism for metal/oxide/metal nanodevices10.1038/nnano.2008.160 ↗
5. Complementary resistive switches for passive nanocrossbar memories10.1038/nmat2748 ↗
6. Direct observations of nanofilament evolution in switching processes in HfO2-based resistive random access memory by in situ TEM studies
7. Direct observation of indium conductive filaments in transparent, flexible, and transferable resistive switching memory10.1021/acsnano.6b07577 ↗
8. Surface diffusion-limited lifetime of silver and copper nanofilaments in resistive switching devices10.1038/s41467-018-07979-0 ↗
9. Resistive switching by voltage-driven ion migration in bipolar RRAM—Part II: modeling10.1109/TED.2012.2202320 ↗
10. Filament conduction and reset mechanism in NiO-based resistive-switching memory (RRAM) devices10.1109/TED.2008.2010583 ↗
11. In-memory computing with resistive switching devices10.1038/s41928-018-0092-2 ↗
12. Controllable formation of nanofilaments in resistive memories via tip‐enhanced electric fields10.1002/aelm.201600233 ↗
13. Unipolar resistive switching of ZnO-single-wire memristors10.1186/1556-276X-9-381 ↗
14. Self-assembled nanostructured resistive switching memory devices fabricated by templated bottom-up growth10.1038/srep18967 ↗
15. Toward controlling filament size and location for resistive switches via nanoparticle exsolution at oxide interfaces10.1002/smll.202003224 ↗
16. Effects of a Nb nanopin electrode on the resistive random-access memory switching characteristics of NiO thin films10.1039/C8NR02986E ↗
17. Interface engineering with MoS2-Pd nanoparticles hybrid structure for a low voltage resistive switching memory
18. Stable resistive switching characteristics from highly ordered Cu/TiO2/Ti nanopore array membrane memristors10.1016/j.apsusc.2020.148161 ↗
19. Highly uniform resistive switching in HfO2 films embedded with ordered metal nanoisland arrays
20. Improvement of resistive switching characteristics in TiO2 thin films with embedded Pt nanocrystals10.1063/1.3193656 ↗
21. Ultra-low power multilevel switching with enhanced uniformity in forming free TiO2−x-based RRAM with embedded Pt nanocrystals10.1002/pssa.201700570 ↗
22. Nonvolatile resistive switching memory utilizing gold nanocrystals embedded in zirconium oxide10.1063/1.2760156 ↗
23. Design of wafer-scale uniform Au nanotip array by ion irradiation for enhanced single conductive filament resistive switching10.1016/j.nanoen.2019.104213 ↗
24. Performance improvement of resistive switching memory achieved by enhancing local-electric-field near electromigrated Ag-nanoclusters10.1039/c3nr33692a ↗
25. Highly improved uniformity in the resistive switching parameters of TiO2 thin films by inserting Ru nanodots10.1002/adma.201204572 ↗
26. Au nanoparticles introduced to spinel Co3O4 thin films: switching enhancement and magnetization modulation10.1016/j.jmmm.2019.165702 ↗
27. Resistive switching and synaptic behaviors of TaN/Al2O3/ZnO/ITO flexible devices with embedded Ag nanoparticles10.1109/LED.2016.2570279 ↗
28. Designable 3D nanofabrication by femtosecond laser direct writing10.1016/j.nantod.2010.08.007 ↗
29. Colloidal self-assembly meets nanofabrication: from two-dimensional colloidal crystals to nanostructure arrays10.1002/adma.201000755 ↗
30. From superamphiphobic to amphiphilic polymeric surfaces with ordered hierarchical roughness fabricated with colloidal lithography and plasma nanotexturing10.1021/la104481p ↗
31. Particle–film plasmons on periodic silver film over nanosphere (AgFON): a hybrid plasmonic nanoarchitecture for surface-enhanced Raman spectroscopy10.1021/acsami.5b09753 ↗
32. Caffeine-imprinted conducting polymeric films with 2D hierarchical pore arrays prepared via colloidal mask-assisted electrochemical polymerization10.1016/j.snb.2018.01.070 ↗
33. A. Fert NiFe2O4: a versatile spinel material brings new opportunities for spintronics10.1002/adma.200500972 ↗
34. Ni ferrite highly organized as humidity sensors10.1016/j.matchemphys.2015.02.044 ↗
35. Construction of a hierarchical NiFe2O4/ CuInSe2 (p-n) heterojunction: highly efficient visible-light-driven photocatalyst in the degradation of endocrine disruptors in an aqueous medium10.1016/j.ceramint.2020.12.022 ↗
36. Biomemristors as the next generation bioelectronics10.1016/j.nanoen.2020.104938 ↗
37. Opportunity of spinel ferrite materials in nonvolatile memory device applications based on their resistive switching performances10.1021/ja305681n ↗
38. Ce-doping induced enhancement of resistive switching performance of Pt/NiFe2O4/Pt memory devices10.1016/j.ceramint.2017.05.214 ↗
39. Coexistence of unipolar and bipolar resistive switching behaviors in NiFe2O4 thin film devices by doping Ag nanoparticles10.1063/1.5018808 ↗
40. Enhanced photocatalytic activity of the carbon quantum dot-modified BiOI microsphere10.1186/s11671-016-1262-7 ↗
41. Coexistence of grain-boundaries-assisted bipolar and threshold resistive switching in multilayer hexagonal boron nitride10.1002/adfm.201604811 ↗
42. The Scherrer formula for X-Ray particle size determination10.1103/PhysRev.56.978 ↗
43. Leakage current-forming voltage relation and oxygen gettering in HfOx RRAM devices10.1109/LED.2013.2256101 ↗
44. Annealing effect on forming-free bipolar resistive switching characteristics of sol-gel WOx resistive memories with Al conductive bridges10.1016/j.jallcom.2021.160758 ↗
45. Distinguishing oxygen vacancy electromigration and conductive filament formation in TiO2 resistance switching using liquid electrolyte contacts10.1021/acs.nanolett.7b01460 ↗
46. Direct observation of oxygen vacancy-driven structural and resistive phase transitions in La2/3Sr1/3MnO310.1038/ncomms14544 ↗
47. Existence of bipolar and unipolar resistive switching in CaZrO3 thin film device10.1016/j.jallcom.2020.158373 ↗
48. Analysis of the bipolar resistive switching behavior of a biocompatible glucose film for resistive random access memory10.1002/adma.201800722 ↗
49. Effect of ultraviolet illumination on metal oxide resistive memory10.1063/1.4904396 ↗
50. Highly uniform, self-compliance, and forming-free ALD HfO2-based RRAM with Ge doping10.1109/TED.2012.2182770 ↗
51. Enhanced resistive switching characteristics in Al2O3 memory devices by embedded Ag nanoparticles10.1088/1361-6528/aa6cd0 ↗
52. Highly improved switching properties in flexible aluminum oxide resistive memories based on a multilayer device structure10.1002/aelm.201800355 ↗
53. Interface engineering via MoS2 insertion layer for improving resistive switching of conductive-bridging random access memory10.1002/aelm.201800747 ↗
54. Microscopic theory of resistive switching in ordered insulators: electronic versus thermal mechanisms10.1021/acs.nanolett.7b00286 ↗
55. Multifilamentary conduction modeling in transition metal oxide-based RRAM10.1109/TED.2017.2709249 ↗
56. Comprehensive physical model of dynamic resistive switching in an oxide memristor10.1021/nn405827t ↗
57. Controllable growth of nanoscale conductive filaments in solid-electrolyte-based ReRAM by using a metal nanocrystal covered bottom electrode10.1021/nn1017582 ↗