Crystallization and its kinetics of soft magnetic (Fe1−xNix)79B12P5Si3C1 glassy alloy ribbons
Source abstract
Abstract
Abstract A glassy phase is formed over the whole composition range for melt-spun (Fe1−xNix)79B12P5Si3C1 with x = 0; 0.2; 0.4; 0.5; 0.6 alloy ribbons and these glassy ribbons exhibit good bending plasticity. The Ni-containing glassy alloys show glass transition, followed by a supercooled liquid (SCL) region and then multistage crystallization for the alloys with x = 0.5 and 0.6 (hereafter 0.5Ni and 0.6Ni alloys). The 0.5Ni glassy alloy exhibits the largest SCL region of 43 K and good soft magnetic properties even in as-spun state, i.e., low coercive force of 4.8 A/m, effective permeability of 7400 at 1 kHz and saturation magnetization of 0.80 T. The bending plasticity remains unchanged in the wide annealing temperature range below Tg. The crystallization proceeds in the processes of glassy (G) → bcc(α)Fe(Si) + Fe3B for the 0–0.2 Ni alloys, G → fcc(γ)(Fe,Ni) + Fe3(B,C) + Fe3Ni3(B,C) for the 0.4Ni alloy and G → G’ + γ(Fe,Ni) → γ(Fe,Ni) + Ni5P2 + Fe4P + Fe3Ni3(B,C) for the 0.5Ni and 0.6Ni alloys. Analyses of crystallization reaction in isochronal and isothermal conditions were performed via Kissinger and JMAK models and the activation energy for crystallization is much larger for the 0.5Ni glassy alloy. The appearance of the largest SCL region as well as the highest activation energy for the 0.5Ni alloy is due to the necessity of the simultaneous decomposition to the four crystalline phases. The better magnetic softness for the 0.5Ni alloy is presumably due to the development of medium-range ordered atomic configurations which enable the appearances of the largest SCL region as well as the lower internal stress state. The combination of useful properties for the 0.5Ni glassy alloy is promising for useful soft magnetic materials with mass production ability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. High-induction low-loss metallic glasses10.1063/1.326308 ↗
2. New Fe-based soft magnetic alloys composed of ultrafine grain structure10.1063/1.342149 ↗
3. High saturation magnetization and soft magnetic properties of bcc Fe-Zr-B and Fe-Zr-B-M (M = transition metal) alloys with nanoscale grain size10.2320/matertrans1989.32.93 ↗
4. Preparation of the Fe-based glassy alloy powder cores and their applications10.2497/jjspm.54.768 ↗
5. Novel Fe(97-x-y)PxByNb2Cr 1 glassy alloys with high magnetization and low loss characteristics for inductor core materials10.1109/TMAG.2009.2033708 ↗
6. Novel FePBNbCr glassy alloys “SENNTIX” with good soft-magnetic properties for high efficiency commercial inductor cores10.1016/j.jallcom.2011.01.215 ↗
7. Formation and magnetic properties of nanocomposites in rapidly solidified Fe42Ni41.7C7Si4.5B3.9P0.9 (at%) rRibbons10.1007/s12540-018-0163-y ↗
8. Evolution and recent developments of 80%Ni permalloys10.1016/j.jmmm.2020.166635 ↗
9. FeNiSiBP glassy alloys with tunable and attractive magnetic performance10.1016/j.jnoncrysol.2017.06.008 ↗
10. Ductile FeNi-based bulk metallic glasses with high strength and excellent soft magnetic properties10.1016/j.jallcom.2018.01.317 ↗
11. FeNi-based bulk glassy alloys with superhigh mechanical strength and excellent soft-magnetic properties
12. Effect of Ni addition on the glass-forming ability and soft-magnetic properties of FeNiBPNb metallic glasses10.1007/s11434-011-4757-8 ↗
13. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
14. Origin of low coercivity of Fe-(Al, Ga)-(P, C, B, Si, Ge) bulk glassy alloys10.2320/matertrans.44.2020 ↗
15. Influence of Ni addition on nanocrystallization kinetics of FeCo-based amorphous alloys10.1016/j.jnoncrysol.2015.12.003 ↗
16. Crystallization kinetics of Mg-Cu-Yb-Ca-Ag metallic glasses10.1016/j.matchar.2015.10.034 ↗
17. Crystallization kinetics of (Ni0.75Fe0.25)78Si10B12 amorphous alloy10.1016/j.jnoncrysol.2007.10.009 ↗
18. Greer · 2014
19. Artificially produced rare-earth free cosmic magnet10.1038/srep16627 ↗
20. Properties of a rare earth free L1 0 -FeNi hard magnet developed through annealing of FeNiPC amorphous ribbons10.1016/j.cap.2019.03.001 ↗
21. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
22. New high-Bs Fe-based nanocrystalline soft magnetic alloys
23. Study of the dynamic of crystallization of an amorphous Fe40Ni40P14B6 ribbon through Johnson-Mehl-Avrami model10.1016/j.jallcom.2017.10.062 ↗
24. Magnetic properties of (Fe1-xNix)72B 20Si4Nb4 (x=0.0-0.5) bulk metallic glasses10.1016/j.jmmm.2013.02.004 ↗
25. Soft magnetic Fe-Si-B-Cu nanocrystalline alloys with high Cu concentrations10.1016/j.jallcom.2017.06.128 ↗
26. Nucleation control for fine nano crystallization of Fe-based amorphous alloy by high-magnetic-field annealing10.1016/j.jallcom.2015.02.197 ↗
27. Fe-Ni-Si (iron-nickel-silicon)10.1007/s11669-008-9406-9 ↗
28. Bulk ferromagnetic glasses in the Fe–Ni–P–B system10.1016/S1359-6454(00)00365-7 ↗
29. Effect of B to P concentration ratio on glass-forming ability and soft-magnetic properties in [(Fe0.5Ni0.5) 0.78B0.22-xPx]97Nb3 glassy alloys10.1016/j.intermet.2011.08.020 ↗
30. Effect of P on glass forming ability, magnetic properties and oxidation behavior of FeSiBP amorphous alloys10.1016/j.intermet.2016.12.024 ↗
31. Crystallisation kinetics of Fe40Ni40B20 amorphous alloy10.1016/j.jnoncrysol.2012.11.028 ↗
32. Fe-based soft magnetic amorphous alloys with high saturation magnetization above 1.5 T and high corrosion resistance10.1016/j.intermet.2014.06.006 ↗
33. High-frequency soft magnetic properties of Fe-Si-B-P-Mo-Cu amorphous and nanocrystalline alloys10.1016/j.jnoncrysol.2019.119702 ↗
34. Thermal stability and mechanical properties of Al-based amorphous alloys10.1016/j.jmatprotec.2004.04.012 ↗
35. Reaction kinetics in differential thermal analysis10.1021/ac60131a045 ↗
36. Crystal growth limitation as a critical factor for formation of Fe-based bulk metallic glasses10.1016/j.actamat.2014.09.025 ↗
37. The applicability of Johnson-Mehl-Avrami model in the thermal analysis of the crystallization kinetics of glasses10.1016/0040-6031(95)02466-2 ↗
38. Magnetic properties and crystallization kinetics of ( Fe 100 − x Ni x) 80 Nb 4 Si 2 B 14 metal amorphous nanocomposites10.1016/j.scriptamat.2017.08.043 ↗
39. Iron-based bulk metallic glasses10.1179/1743280412Y.0000000007 ↗
40. Comparative analysis of glass-formation in binary, ternary, and multicomponent alloys10.1063/1.3506687 ↗