journal article·2021-12

Dendrite-free lithium plating enabled by yolk shell structured ZnO/C sphere coated polyethylene separator for stable lithium metal anodes

Dongsoo Lee, Insung Hwang, Yongmin Jung, Seho Sun, Taeseup Song, Ungyu Paik

Publisher page

Abstract

Abstract Lithium metal has great attraction as an ultimate anode material due to its extremely high capacity of 3860 mAh g−1 and the lowest electrochemical potential (−3.04 V vs SHE). However, Li dendrite growth and corresponding poor cyclability still obstruct the practical use of Li metal anodes. Here, we report the yolk shell structured zinc oxide/carbon sphere coated polyethylene separator (ZnO/C@SE) to suppress Li dendrite growth and improve the cycle life of Li metal anodes. Initially ZnO could be lithiated first to form LiZn and Li2O. The lithiated ZnO and carbon layer on a polyethylene separator not only enables uniform surface current flows at an interface between a Li metal anode and an electrolyte, but also efficiently utilizes electrochemically inactive “dead” Li. With those synergistic advantages, Li could be deposited with dendrite-free morphology with the areal capacity up to 5 mAh cm–2. The Li || Cu cell with ZnO/C@SE shows outstanding performance even at a high current density of 2 mA cm–2 with a high capacity of 2 mAh cm–2 over 100 cycles. Furthermore, the Li–S battery with the ZnO/C@SE exhibits significant improvement in cycle performance at 0.2 C over 300 cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Evolution of strategies for modern rechargeable batteries10.1021/ar2002705 ↗
2. A solid future for battery development
3. A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutions10.1016/S0167-2738(02)00080-2 ↗
4. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
5. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
6. The electrochemical behavior of alkali and alkaline earth metals in nonaqueous battery systems—the solid electrolyte interphase model10.1149/1.2128859 ↗
7. Effect of the anion activity on the stability of Li metal anodes in lithium-sulfur batteries10.1002/adfm.201505074 ↗
8. Dendrite-free lithium deposition induced by uniformly distributed lithium ions for efficient lithium metal batteries10.1002/adma.201506124 ↗
9. High rate and stable cycling of lithium metal anode10.1038/ncomms7362 ↗
10. Prestoring lithium into stable 3D nickel foam host as dendrite-free lithium metal anode10.1002/adfm.201700348 ↗
11. Tailoring a tyrosine-rich peptide into size- and thickness-controllable nanofilms10.1021/acsomega.8b00395 ↗
12. Lithium fluoride additives for stable cycling of lithium batteries at high current densities10.1002/aelm.201500246 ↗
13. Copper nitride nanowires printed Li with stable cycling for Li metal batteries in carbonate electrolytes
14. A robust solid electrolyte interphase layer coated on polyethylene separator surface induced by Ge interlayer for stable Li-metal batteries10.1016/j.electacta.2020.137703 ↗
15. Suppressing lithium dendrite growth by metallic coating on a separator10.1002/adfm.201704391 ↗
16. Metal coated polypropylene separator with enhanced surface wettability for high capacity lithium metal batteries10.1038/s41598-019-53257-4 ↗
17. Dendrite-free lithium metal anode enabled by separator engineering via uniform loading of lithiophilic nucleation sites10.1016/j.ensm.2018.10.015 ↗
18. Electron-beam lithography for polymer bioMEMS with submicron features10.1038/micronano.2016.53 ↗
19. Critical role of interface contact modulation in realizing low-temperature fabrication of efficient and stable CsPbIBr2 perovskite solar cells10.1016/j.cej.2020.124903 ↗
20. Highly compact CsPbBr3 perovskite thin films decorated by ZnO nanoparticles for enhanced random lasing10.1016/j.nanoen.2017.08.013 ↗
21. High performance CsPbBr3 quantum dots photodetectors by using zinc oxide nanorods arrays as an electron-transport layer
22. Surface modification and reconstruction of ZnO hollow microspheres for selective electroreduction of CO2 to CO10.1016/j.jallcom.2021.160703 ↗
23. A surface multiple effect on the ZnO anode induced by graphene for a high energy lithium-ion full battery10.1016/j.jallcom.2020.153945 ↗
24. Si/ZnO framework: 3D lithiophilic structure for dendrite-free lithium metal batteries10.1016/j.jallcom.2021.160188 ↗
25. ZnCo2O4/ZnO induced lithium deposition in multi-scaled carbon/nickel frameworks for dendrite-free lithium metal anode10.1016/j.jechem.2019.07.010 ↗
26. Uniform Li deposition sites provided by atomic layer deposition for the dendrite-free lithium metal anode10.1021/acsami.0c02153 ↗
27. Synthesis of tin-encapsulated spherical hollow carbon for anode material in lithium secondary batteries10.1021/ja0345524 ↗
28. Achieving three-dimensional lithium sulfide growth in lithium-sulfur batteries using high-donor-number anions10.1038/s41467-018-07975-4 ↗
29. ZnO nanomaterials synthesized from thermal evaporation of ball-milled ZnO powders10.1016/S0022-0248(03)01197-7 ↗
30. Unusual Na+ ion intercalation/deintercalation in metal-rich Cu1. 8S for Na-ion batteries10.1021/acsnano.8b00118 ↗
31. Core-decomposition-facilitated fabrication of hollow rare-earth silicate nanowalnuts from core–shell structures via the Kirkendall effect10.1039/C5NR02684A ↗
32. Arrays of sealed silicon nanotubes as anodes for lithium ion batteries10.1021/nl100086e ↗
33. Lithium whisker growth and stress generation in an in situ atomic force microscope–environmental transmission electron microscope set-up10.1038/s41565-019-0604-x ↗
34. Graphene-wrapped ZnO hollow spheres with enhanced electromagnetic wave absorption properties10.1039/C4TA03033H ↗
35. Improved sensing response of photo activated ZnO thin film for hydrogen peroxide detection10.1016/j.jcis.2016.07.066 ↗
36. Dendritic growth mechanisms in lithium/polymer cells10.1016/S0378-7753(98)00242-0 ↗
37. Stable artificial solid electrolyte interphase with lithium selenide and lithium chloride for dendrite-free lithium metal anodes10.1016/j.jpowsour.2021.230158 ↗
38. Self-sacrifice template fabrication of hierarchical mesoporous Bi-component-active ZnO/ZnFe2O4 sub-microcubes as superior anode towards high-performance lithium-ion battery10.1002/adfm.201402827 ↗
39. Atomic layer deposited zinc oxysulfide anodes in Li-ion batteries: an efficient solution for electrochemical instability and low conductivity10.1039/C8TA04129F ↗
40. The electrochemical reaction of zinc oxide thin films with lithium10.1149/1.1570410 ↗
41. Operando NMR and XRD study of chemically synthesized LiCx oxidation in a dry room environment10.1016/j.jpowsour.2015.04.035 ↗
42. Mixed ionic and electronic conductor for Li-metal anode protection10.1002/adma.201705105 ↗
43. Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode10.1038/ncomms10992 ↗
44. Lithium whisker growth and stress generation in an in situ atomic force microscope–environmental transmission electron microscope set-up10.1038/s41565-019-0604-x ↗
45. Enhanced strength and temperature dependence of mechanical properties of Li at small scales and its implications for Li metal anodes10.1073/pnas.1615733114 ↗
46. Interconnected hollow carbon nanospheres for stable lithium metal anodes10.1038/nnano.2014.152 ↗
47. Constructing ultrathin TiO2 protection layers via atomic layer deposition for stable lithium metal anode cycling10.1016/j.jallcom.2021.158748 ↗
48. High-capacity, low-tortuosity, and channel-guided lithium metal anode10.1073/pnas.1618871114 ↗
49. Transition of lithium growth mechanisms in liquid electrolytes10.1039/C6EE01674J ↗
50. Electrochemical impedance spectroscopy (EIS) study of LiNi1/3Co1/3Mn1/3O2 for Li-ion batteries10.1016/S1452-3981(23)13343-8 ↗
51. Robust lithium metal anodes realized by lithiophilic 3D porous current collectors for constructing high-energy lithium–sulfur batteries10.1021/acsnano.9b03784 ↗
52. Two-dimensional Nafion nanoweb anion-shield for improved electrochemical performances of lithium–sulfur batteries10.1039/C6TA04203A ↗