journal article·2021-12

Spinodal decomposition in ternary Mn-Cu-Cr alloy and its influence on martensitic transition temperatures

Liying Sun, R.N. Vasin, A.Kh. Islamov, I.A. Bobrikov, S.V. Sumnikov, A.M. Balagurov, Weimin Guo, W.C. Cheng, I.S. Golovin

Publisher page

Abstract

Abstract The effect of partial substitution of Cu by Cr on the spinodal decomposition of face-centered cubic (f.c.c.) austenite in the as-quenched Mn-10Cu-4Cr alloy is studied after different ageing treatments by small-angle neutron scattering (SANS) and in situ neutron diffraction. Under the same quenching conditions, additional α-Mn phase with A12 structure in the Mn-10Cu-4Cr alloy is observed as compared with Mn-13Cu alloy at room temperature (RT). The replacement of Cu atoms by Cr atoms retards the spinodal decomposition of austenite during ageing compared to the binary Mn-13Cu alloy according to SANS and Differential scanning calorimetry (DSC) results. The reason is that Cr enriches in the α-Mn phase, and thus its addition leads to the formation of the α-Mn phase. Compared to the Mn-13Cu alloy, there is an increase in the tetragonality of the face-centered tetragonal (f.c.t.) martensite, which may be attributed to changes in magnetic interaction owing to partial substitution of Cu by Cr. The higher tetragonality value leads to a higher volume effect during martensitic transition (MT) of Mn-10Cu-4Cr alloy than that of Mn-13Cu alloy (around 1.5 times). The lattice parameters of the f.c.t.-martensite do not converge exactly to the parameter of the f.c.c.-austenite at the MT temperature due to replacement of Cu by Cr. Instead, there is a jump of the lattice parameters during phase transition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Shape Memory Alloy Transformations · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Effects of transformation twin on Hall–Petch relationship in MnCu alloy10.1016/j.msea.2008.04.035 ↗
2. Novel cast-aged MnCuNiFeZnAl alloy with good damping capacity and high usage temperature toward engineering application10.1016/j.matdes.2016.05.098 ↗
3. The strengthening effect of spinodal decomposition and twinning structure in MnCu-based alloy10.1016/j.msea.2014.09.020 ↗
4. Application of high-damping alloy M2052
5. Li · 2004 · 156
6. Spinodal decomposition influence of austenite on martensitic transition in a Mn-13 at%Cu alloy10.1016/j.jallcom.2020.157061 ↗
7. Reverse transformation behavior of a prestrained MnCu alloy10.1016/j.actamat.2005.12.007 ↗
8. The twinning microstructure and damping behavior in Mn–30Cu (at%) alloy10.2320/matertrans.46.2164 ↗
9. Wolfenden · 1997 · 365
10. Influence of spinodal decomposition on structure and thermoelastic martensitic transition in MnCuAlNi alloy10.1016/j.matlet.2020.128069 ↗
11. Decomposition of Gamma‐phase manganese copper alloys10.1063/1.1657302 ↗
12. E.S. Klyueva PhD Thesis 2018, Tula State University Tula.
13. Effect of ageing on martensitic transformation in γ-MnCu alloy10.1016/S0921-5093(00)00691-2 ↗
14. Spinodal decomposition and martensitic transformation kinetics of the 82.2Mn-15.8Cu-2Al thermosensitive damping alloy10.1016/j.tca.2019.178321 ↗
15. Phase decomposition of the austenite phase in a Mn-30at%Cu alloy during ageing10.1016/S1359-6454(99)00419-X ↗
16. A.V. Udovenko, G.V. Markova, R.N. Rostovtsev, Microstructure and properties of Mn-Cu alloys system, Monograph, Tula, 2005 (in Russian).
17. Fang · 2014 · 336
18. Remarkable improvement of damping capacity of Mn-20Cu-5Ni-2Fe (at%) alloy by zinc element addition10.1002/adem.201700437 ↗
19. V.L. Vinogradova PhD Thesis, 2002 Tula State University Tula.
20. The damping behavior of Ni added Mn–Cu damping alloys10.2320/matertrans.44.1671 ↗
21. Formation of the thermodeformational properties of Mn-Cu-based alloys having the two-way shape memory effect10.1134/S0036029508040113 ↗
22. Naumov · 1999
23. High resolution Fourier diffraction at the IBR-2 reactor10.1080/10446830500454346 ↗
24. Correlation Fourier diffractometry: 20 years of experience at the IBR-2 reactor10.1134/S1063779615030041 ↗
25. Combined texture and structure analysis of deformed limestone from time-of-flight neutron diffraction spectra10.1063/1.364220 ↗
26. Fityk: a general-purpose peak fitting program10.1107/S0021889810030499 ↗
27. Scientific reviews: two-detector system for small-angle neutron scattering instrument10.1080/10448630500454361 ↗
28. Structure and properties of a ribbon quenched from a molten Mn-Cu-Cr alloy with reversible shape memory10.1007/BF02468253 ↗
29. Leaf-like dislocation substructures and the decrease of martensitic start temperatures: a new explanation for functional fatigue during thermally induced martensitic transformations in coarse-grained Ni-rich Ti–Ni shape memory alloys10.1016/j.actamat.2011.12.014 ↗
30. Structure of the Fe-Mn-Si alloys submitted to γ ↔ ε thermocycling10.1016/j.matchar.2018.04.052 ↗
31. In situ neutron diffraction study of internal stresses in 60% Mn – 40% Cu alloy introduced by ageing10.4028/www.scientific.net/SSP.137.163 ↗
32. Changes in cell dimensions at the martensitic transformation in γMn-Cu alloys10.1088/0305-4608/7/12/001 ↗
33. Lattice distortion, elasticity and antiferromagnetic order in copper-manganese alloys10.1088/0022-3719/2/6/304 ↗
34. Lattice distortion and multiple spin density wave state in γMn alloys10.1143/JPSJ.55.2017 ↗
35. Atomic clustering and transverse fluctuations of magnetic moments in single-domain antiferromagnetic γ-Mn90Cu1010.1103/PhysRevB.46.915 ↗
36. Spin correlations in MnCu spin-glass alloy10.1143/JPSJ.79.104701 ↗