journal article·2021-12

Refinement of fundamental characteristic properties with homovalent Er/Y partial replacement of YBa2Cu3O7−y ceramic matrix

Umit Erdem, Mustafa B. Turkoz, Gurcan Yıldırım, Yusuf Zalaoglu, Saffet Nezir

Publisher page

Abstract

Abstract In the current work, the effect of partial substitution of Er-sites for the Y-sites in the bulk YBa2Cu3O7−y (YBCO) crystal system on the fundamental superconducting, electrical, crystallinity and structural morphology features is examined together with the reasons by means of powder X-ray diffraction (XRD), temperature-dependent electrical resistivity (ρ-T), scanning electron microscopy (SEM), electron dispersive X-ray (EDX) investigations and deduced calculation parameters. All the experimental test results show that the erbium impurities are successfully substituted by the yttrium sites in the bulk Y-123 crystal system, confirmed by sensitively the EDX and ρ-T measurement results. Moreover, it is found that all the fundamental characteristic quantities improve with the increment in the Er/Y partial substitution level up to the value of x = 0.03 beyond which the features tend to degrade dramatically. In this respect, the bulk Y1−xErxBa2Cu3O7−y ceramic compound prepared within the molar ratio of x = 0.03 crystallizes in the orthorhombic space group P4/mmm with a little distortion due to the refinement in the crystallinity quality, crystallite growth, oxygen ordering degree, scattering mechanism, intra and inter-grain boundary couplings, grain alignment distributions and orientations. The XRD results show that the optimum erbium content enables to develop seriously the fundamental crystallographic features (lattice strain, lattice cell constants, crystallite size distribution, dislocation density ratio, oxygen concentrations in the unit cells) of Y-123 crystal structure. However, the excess Er/Y substitution leads to enhance considerably the systematic structural problems and inhomogeneous distribution of strains (formed by the structural defects) in the YBCO crystal structure. Thus, the phase transition from orthorhombic to tetragonal (structural O–T transition) crystal structure is observed. In fact, the XRD result displays that the trivalent Er3+ particles may partially be replaced by the divalent Cu2+ host atoms in the bulk Y-123 crystal structure after the critic substitution level of x = 0.03. The optimum Er concentration causes to form more thermodynamically activated super-electrons in the homogeneous superconducting cluster percentages in the paths due to the induced polaronic effect, and accordingly the intrinsic overdoped nature of Y-123 ceramic system transits into optimally doped state. Similarly, the erbium ions enable to increase the mobile hole carrier concentration and homogeneities in the oxidation state of superconducting grains. Namely, the amplitude of pair wave function (Ψ = Ψ0e-iφ) is strength enough to form bipolarons in the polarizable lattices and localize of densities of electronic states (DOS) at Fermi level. SEM investigations picture that the surface morphology view and crystallinity quality develop remarkably with the increment in the erbium content up to the critical dopant level of x = 0.03 where the sample exhibits the best grain alignment orientations, densest and smoothest surface morphology with the combination of lowest porous and largest particle distributions well linked each other. All in all, this comprehensive work based on the analysis of Er/Y partial replacement mechanism along the YBa2Cu3O7−y ceramic matrix may open up a newly/novel and feasible area for the advanced engineering, heavy-industrial technology and large-scale applications of type-II superconducting materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Physics of Superconductivity and Magnetism · Superconductivity in MgB2 and Alloys · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (82)

Show source-provided references
1. Microstructure and properties of high-temperature superconductors
2. Ginzburg · 2004
3. Role of preparation conditions of Bi-2223 ceramic materials and optimization of Bi-2223 phase in bulk materials with experimental and statistical approaches10.1016/j.jallcom.2016.02.232 ↗
4. Further experiments with liquid helium. D. On the change of electrical resistance of pure metals at very low temperatures, etc. V. The disappearance of the resistance of mercury
5. Joining of Bi-2212 high-T-c superconductors and metals using indium solders10.1016/j.physc.2007.05.040 ↗
6. 6.4 MVA resitive fault current limiter based on Bi-2212 superconductor10.1016/S0921-4534(02)01096-1 ↗
7. A resistive fault current limiter based on high temperature superconductors10.1016/0964-1807(95)00074-7 ↗
8. Determination of optimum diffusion annealing temperature for Au surface-layered Bi-2212 ceramics and dependence of transition temperatures on disorders10.1016/j.jallcom.2016.12.370 ↗
9. Cuprate superconductors: science beyond high T(c)10.1016/S0038-1098(98)00296-8 ↗
10. Dogruer · J. Mater. Sci.: Mater. Electron. · 2013 · 24 · 1264
11. A finite element model of magnetization of superconducting bulks using a solid-state flux pump10.1109/TASC.2011.2163390 ↗
12. Effect of vanadium addition on fundamental electrical quantities of Bi-2223 crystal structure and semi-empirical model on structural disorders-defects
13. Enhancement of local microstructural distortions, boundary weak-interactions and crucial defeats performed via Bi+3/La+3 partial substitution in the Bi-2212 matrix10.1016/j.jallcom.2015.10.294 ↗
14. Role of trivalent Bi /Tm partial substitution on active operable slip systems in Bi 2212 crystal structure10.1016/j.cryogenics.2020.103212 ↗
15. Application of high-pressure techniques: stabilization and oxidation-state control of novel superconductive and related multi-layered copper oxides10.1088/0953-2048/13/4/202 ↗
16. High-pressure synthesis of homologous series of high critical temperature (Tc) superconductors10.1021/cm9802301 ↗
17. Evaluation of solders for superconducting magnetic shield10.1109/20.133563 ↗
18. A novel research on the subject of the load-independent microhardness performances of Sr/Ti partial displacement in Bi-2212 ceramics
19. Bi-2223 and Bi-2212 tubes for small fault current limiters10.1109/TASC.2004.830298 ↗
20. Hole-doping routes for understanding the relationship between atomic arrangements and superconductivity properties in multi-layered copper oxides10.1016/S1466-6049(00)00085-4 ↗
21. Luiz · 2011
22. Optimization of calcination conditions on the Bi-2223 kinetic formation and grain size10.1088/0953-2048/13/5/333 ↗
23. Saxena · 2012
24. Ansari · J. Appl. Phys. · 2005 · 9710.1063/1.1850383 ↗
25. Gorur · J. Mater. Sci. Mater. Electron. · 2013 · 24 · 184210.1007/s10854-012-1022-0 ↗
26. Comparative study on mechanical properties of undoped and Ce-doped Bi-2212 superconductors10.1007/s10854-013-1098-1 ↗
27. Effect of La-doping on growth and superconductivity of Bi-2212 crystals10.1016/S0921-4534(99)00457-8 ↗
28. Bi-2212 superconductors for current limiters10.1007/s10948-014-2651-8 ↗
29. Improvement of the nature of indentation size effect of Bi-2212 superconducting matrix by doped nd inclusion and theoretical modeling of new matrix10.1007/s10948-014-2477-4 ↗
30. Highly enhanced superconducting properties of Bi-2212 by Y and Pb co-doping10.1016/j.physb.2009.01.023 ↗
31. Stoichiometric transfer of material in the infrared pulsed laser deposition of yttrium doped Bi-2212 films10.1016/j.physc.2011.03.010 ↗
32. Enhanced flux pinning in IR PLD grown Y-doped Bi-2212 films10.1016/j.physc.2012.03.045 ↗
33. Determination of solid solubility level of Ho nanoparticles in Y-123 superconducting matrix and strong Cu-1 site preference of nanoparticles10.1016/j.jallcom.2014.04.037 ↗
34. Sn diffusion coefficient and activation energy determined by way of XRD measurement and evaluation of micromechanical properties of Sn diffused YBa2Cu3O7-x superconducting ceramics10.1007/s10854-013-1212-4 ↗
35. Granular superconductivity in polycrystalline Bi2Sr2CaCu2O8+γ by homovalent La substitution on Bi sites10.1016/j.jnoncrysol.2010.09.036 ↗
36. A correlation between transport current density and grain connectivity in MgB2/Fe wire made from ball-milled boron10.1063/1.3129314 ↗
37. A detailed research for determination of Bi/Ga partial substitution effect in Bi-2212 superconducting matrix on crucial characteristic features10.1016/j.jallcom.2018.09.071 ↗
38. Allen · Phys. Rev. B · 1988 · 37 · 748210.1103/PhysRevB.37.7482 ↗
39. Martin · Phys. Rev. B · 1989 · 39 · 961110.1103/PhysRevB.39.9611 ↗
40. Hall effect in the two-dimensional Luttinger liquid10.1103/PhysRevLett.67.2092 ↗
41. Electrical and mechanical properties of (Bi, Pb)-2223 substituted by holmium10.1007/s40145-015-0173-x ↗
42. Effect of Ti doping on structural and superconducting property of YBa2Cu3O7−y high Tc superconductor10.1007/s10948-013-2269-2 ↗
43. Role of van hove singularity in high-temperature superconductors: Mean field10.1103/PhysRevB.43.3075 ↗
44. Nonlinear temperature-dependence of the normal-state resistivity in YBa2Cu4O8γ films10.1103/PhysRevB.39.9611 ↗
45. Charge carrier localization and metal to insulator transition in cerium substituted (Bi,Pb)-2212 superconductor10.1016/j.jallcom.2009.12.047 ↗
46. Investigation of Lu effect on YBa2Cu3O7-γ superconducting compounds
47. Important defeats on pinning of 2D pancake vortices in highly anisotropic Bi-2212 superconducting matrix with homovalent Bi/La substitution10.1016/j.jallcom.2015.01.095 ↗
48. Ekin · 2006
49. U. Soykan, G. Valiyeva , G. Yıldırım, A Valuable View on evaluation of general mechanical performances pertaining to Bi-2223 superconductıng ceramics with vanadium addition. Eskişehir Technical University Journal of Science and Technology A-Applied Sciences and Engineering, 21, 20–27.10.18038/estubtda.818346 ↗
50. Effect of partial substitution of Ca by 4f elements on dissipative processes in Bi: 2223 superconductors10.1088/1742-6596/153/1/012022 ↗
51. Mechanical properties and uniformity of Fe-MgB2 wires upon various wire drawing steps10.1016/j.msea.2018.02.073 ↗
52. Magnetic properties and critical current density of bulk MgB2 polycrystalline with Bi-2212 addition10.1088/0953-2048/18/8/L01 ↗
53. Role of Bi/Tm substitution in Bi-2212 system on crystal structure quality, pair wave function and polaronic states10.1016/j.jallcom.2018.06.142 ↗
54. The influence of SnO2 nano-particles addition on the vickers microhardness of (Bi, Pb)-2223 superconducting phase10.1007/s10948-011-1334-y ↗
55. Burns · 1991
56. Decrement in metastability with Zr nanoparticles inserted in Bi-2223 superconducting system and working principle of hybridization mechanism
57. Experimental and theoretical approaches for electrical, magnetic, micromechanical, and structural characterization of BSCCO ceramic superconductors10.1016/j.ceramint.2018.03.243 ↗
58. Characteristics of hopping conductivity in one-dimensional binary disordered system with off-diagonal correlations10.7498/aps.56.2852 ↗
59. Improvement of mechanical performances and characteristics of bulk Bi-2212 materials exposed to Au diffusion and stabilization of durable tetragonal phase by Au10.1016/j.ceramint.2017.02.104 ↗
60. Localization and interaction effects in ultrathin amorphous superconducting films10.1103/PhysRevB.29.4167 ↗
61. Change of mechanical performance and characterization with replacement of Ca by Gd nanoparticles in Bi-2212 system and suppression of durable tetragonal phase by Gd
62. U. Soykan, F. Valiyeva, G. Yıldırım, Examınatıon of vanadıum effect on general mechanical characteristics of Bi-2223 materials via semi-empiric models. Eskişehir Technical University Journal of Science and Technology A-Applied Sciences and Engineering, 21, 91–100.10.18038/estubtda.818446 ↗
63. Breakdown of Eliashberg theory for two-dimensional superconductivity in the presence of disorder10.1103/PhysRevLett.57.2195 ↗
64. Role of diffusion-annealing temperature on the microstructural and superconducting properties of Cu-doped MgB2 superconductors
65. Chaillout · Solid State Commun. · 1989 · 70 · 27510.1016/0038-1098(89)90326-8 ↗
66. Hamrita · Phys. C · 2012 · 472 · 3410.1016/j.physc.2011.10.003 ↗
67. The influence of sintering temperature on the microstructure and superconducting properties of Bi1.7Pb0.4Sr1.8Nd0.2Ca1.1Cu2.1O8+delta superconductor10.1088/0953-2048/21/4/045001 ↗
68. Doping controlled metal to insulator transition in the (Bi, Pb)-2212 system10.1088/0953-2048/22/4/045016 ↗
69. Vinu · Phys. B · 2010 · 405 · 435510.1016/j.physb.2010.07.042 ↗
70. Vinu · J. Alloy. Comp. · 2009 · 487 · 110.1016/j.jallcom.2009.07.128 ↗
71. Investigation into the superconducting threshold of Bi1.6Pb0.4Sr2Can-1CunO2n+4+y, n=2, 2.5, 4 perovskites synthesized by glassy precursor route with Thermal and Raman spectroscopic techniques10.1007/s10973-012-2845-x ↗
72. Akyuz · J. Supercond. Nov. Magn. · 2011 · 24 · 218910.1007/s10948-011-1180-y ↗
73. Hole density dependence of the critical temperature and coupling constant in the cuprate superconductors10.1126/science.249.4973.1143 ↗
74. Sarun · J. Alloy. Comp. · 2009 · 472 · 1310.1016/j.jallcom.2008.04.103 ↗
75. Biju · J. Alloy. Comp. · 2008 · 454 · 4610.1016/j.jallcom.2006.12.100 ↗
76. Raveau · 1991
77. Detailed analysis on electrical conduction transition from 2D variable range hopping to phonon-assisted 3D VRH mechanism belonging to Bi-site La substituted Bi-2212 system10.1016/j.jallcom.2014.10.150 ↗
78. Higher intra-granular and inter-granular performances of YBCO superconductor with TiO2 nano-sized particles addition10.1016/j.ceramint.2018.07.118 ↗
79. Influence of oxygen ordering and sintering temperatures on the superconducting transition temperature of YBa2Cu3Ox compound at fixed oxygen content x higher than x = 6.810.1016/0038-1098(89)91011-9 ↗
80. Yildiz · J. Supercond. Nov. Magn. · 2012 · 25 · 145910.1007/s10948-012-1482-8 ↗
81. Cullity · 2001
82. Mapping the orthorhombic‐to‐tetragonal transition at ambient temperature in YBa2Cu3O y ceramics10.1063/1.342462 ↗