journal article·2021-11

Thermal treatment for enhancing performance of NiO/Ag/NiO transparent conducting electrode fabricated via magnetron radio-frequency sputtering

Jun-Dar Hwang, Yan-Jhong Chiou

Publisher page

Abstract

Abstract A NiO/Ag/NiO (NAN) transparent conducting electrode (TCE) is fabricated using a low-cost magnetron-sputtering system. The effects of various thicknesses of the Ag intermediate layer and different annealing temperatures on the optical and electrical properties of the prepared TCEs are investigated comprehensively. A NAN TCE with a thin (8 nm) Ag layer demonstrates a slightly lower average transmittance than that with a 10 nm Ag layer because the thinner Ag layer appears as an isolated island structure, resulting in higher optical absorption. As the Ag thickness increases to 10 nm, the isolated islands become connected to each other and form a continuous thin film. As the Ag thickness increases, the carrier concentration and mobility increase and the formation of a continuous dense film, which decrease the resistivity and sheet resistance of the NAN TCE. The NAN TCE with a 14-nm intermediate Ag layer exhibits a sheet resistance of 3.67 Ω/sq, which is much lower than that (34 Ω/sq) of a single ITO electrode. The NAN TCE with a 10-nm Ag exhibits the highest figure-of-merit (FOM) than others. The annealing significantly increases the FOM from 2.5 × 10–4 to 1.2 × 10–2 Ω−1, respectively, for the as-deposited NAN TCE with a 10-nm Ag layer and the NAN TCE annealed at 400 °C. However, the performance of NAN TCE degrades at higher annealing temperature (500 °C).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Advanced Sensor and Energy Harvesting Materials · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. AZO (Al:ZnO) thin films with high figure of merit as stable indium free transparent conducting oxide
2. Design optimization of CdTe/Si tandem solar cell using different transparent conducting oxides as interconnecting layers
3. Characterization of the physical and electrical properties of Indium tin oxide on polyethylene napthalate10.1063/1.2106013 ↗
4. Graphene as transparent electrodes: fabrication and new emerging applications10.1002/smll.201502988 ↗
5. Changes in microbial communities, photosynthesis and calcification of the coral Acropora gemmifera in response to ocean acidification
6. Functionalization of carbon nanomaterials for advanced polymer nanocomposites: a comparison study between CNT and graphene10.1016/j.progpolymsci.2016.12.010 ↗
7. Preparation of flexible organic solar cells with highly conductive and transparent metal-oxide multilayer electrodes based on silver oxide10.1021/am401845n ↗
8. Work function-tunable ZnO/Ag/ZnO film as an effective hole injection electrode prepared via nickel doping for thermally activated delayed fluorescence-based flexible blue organic light-emitting diodes
9. The enhancement of thermal endurance in doped low emissive ZnO/Ag/ZnO multilayer thin film10.1016/j.jallcom.2020.154983 ↗
10. New dielectric/metal/dielectric electrode for organic photovoltaic cells using Cu:Al alloy as metal10.1016/j.jallcom.2019.152974 ↗
11. Semitransparent perovskite solar cells with dielectric/metal/dielectric top electrodes10.1002/ente.201900868 ↗
12. Influence of electrode materials (Ag, Au) on NiO/TiO2 heterojunction UV photodetectors10.1016/j.ijleo.2020.165705 ↗
13. Performance improvement of TiO2/Ag/TiO2 multilayer transparent conducting electrode films for application on phototdetectors
14. Improved conductivity and mechanism of carrier transport in zinc oxide with embedded silver layer10.1063/1.2829788 ↗
15. Low resistance and highly transparent ITO-Ag-ITO multilayer electrode using surface plasmon resonance of Ag layer for bulk-heterojunction organic solar cells10.1016/j.solmat.2009.06.014 ↗
16. The optical analysis of the multilayer transparent electrode and the formation of ITO/Mesh-Ag/ITO multilayers for enhacing an optical transmittance10.1016/j.apsusc.2019.05.106 ↗
17. Thermal stability enhancement of SnO2/Ag/SnO2 transparent electrodes using Ni-doped Ag
18. AZO/Ag/AZO transparent flexible electrodes on mica substrates for high temperature application10.1016/j.ceramint.2017.08.089 ↗
19. Characteristics of indium-free GZO/Ag/GZO and AZO/Ag/AZO multilayer electrode grown by dual target DC sputtering at room temperature for low-cost organic photovoltaics10.1016/j.solmat.2009.07.016 ↗
20. Structural and electrical functionality of NiO interfacial films in bulk heterojunction organic solar cells10.1021/cm200229e ↗
21. Performance enhancement of CIGS thin-film solar cells with a functional-window NiO thin layer10.1016/j.jallcom.2020.154803 ↗
22. Carrier-selectice NiO/Si and TiO2/Si contacts for silicon heterojunction solar cells10.1109/TED.2016.2585523 ↗
23. Solution-processed quantum dot light-emitting diodes based on NiO nanocrystals hole injection layer10.1016/j.orgel.2017.02.023 ↗
24. Role of p-NiO electron blocking layers in fabrication of (P-N):ZnO/Al:ZnO UV photodiodes10.1016/j.cap.2016.06.003 ↗
25. Trifunctional NiO-Ag-NiO electrodes for ITO-free electrochromic supercapacitors10.1039/C7TC03120C ↗
26. High-performance NiO/Ag/NiO transparent electrodes for flexible organic photovoltaic cells10.1021/am504806k ↗
27. All transparent high-performance solar-blind n-ITO/p-NiO/n-ZnO ultraviolet heterojunction bipolar phototransistor10.1063/5.0020202 ↗
28. Photocurrent spectroscopy of optical absorption enhancement in silicon photodiodes via scattering from surface plasmon polaritons in gold nanoparticles
29. High-performance radiation stable ZnO/Ag/ZnO multilayer transparent conductive electrode10.1016/j.solmat.2017.05.009 ↗
30. Investigation of metal-nickel oxide contacts used for perovskite solar cell10.1063/1.5063475 ↗
31. ZnO-Ag-MoO3 transparent composite electrode for ITO-free, PEDOT: PSS-free bulk-heterojunction organic solar cells10.1016/j.solmat.2013.07.009 ↗
32. Improvement of MoO3/Ag/MoO3 multilayer transparent electrodes for organic solar cells by using UV-ozone treated MoO3 layer10.1016/j.solmat.2018.06.031 ↗
33. High quality transparent conductive ZnO/Ag/ZnO multilayer films deposited at room temperature10.1016/j.tsf.2006.07.049 ↗
34. Preparation of RF sputtered AZO/Cu/AZO multilayer films and the investigation of Cu thickness and substrate effects on their microstructural and optoelectronic properties10.1016/j.jallcom.2020.158470 ↗
35. Development of a highly transparent, low-resistance lithium-doped nickel oxide triple-layer film deposited by magnetron sputtering10.1039/C6CC08738H ↗
36. Effect of annealing temperature on the characteristics of the modified spray deposited Li-doped NiO films and their applications in the transparent heterojunction diodes10.1016/j.solmat.2014.09.017 ↗
37. Annealing effect of ZnO/Au/ZnO transparent conductive films10.1016/j.vacuum.2012.02.041 ↗
38. Effect of Ni-doped Ag on the thermal stability of ZnO/Ag/ZnO multilayer thin films
39. Transmission electron microscopy study of degradation in transparent indium tin oxide/Ag/indium tin oxide multilayer films10.1063/1.4812815 ↗
40. Optimized ITO/Ag/ITO multilayers as a current spreading layer to enhance the light output of ultraviolet light-emitting diodes10.1016/j.jallcom.2018.10.368 ↗
41. Effect of heat treatment on the properties of non-stoichiometric p-type nickel oxide films deposited by reactive sputtering10.1016/j.tsf.2005.04.061 ↗
42. Point defects in sputtered NiO films
43. Effect of annealing on structural, morphological, electrical and optical studies of nickel oxide thin films