journal article·2021-11

Atomic scale insights into the rapid crystallization and precipitation behaviors in FeCu binary alloys

Haodong Xu, Hongwei Bao, Yan Li, Huizhong Bai, Fei Ma

Publisher page

Abstract

Abstract Molecular dynamics (MD) simulations are employed to probe the crystallization and precipitation behaviors in FeCu alloys. The alloys will undergo liquid phase separation at high temperature, after which α-Fe nucleates preferentially, then metastable Cu solid solutions in BCC lattice (e` phase) nucleate and transform into FCC structure (e-Cu) via martensite phase transformation immediately. Reversible order-disorder transformation behavior is observed during time-consuming crystallization process of e-Cu. Interestingly, the e`-Cu with only approximately three atomic layers in thickness exists stably near BCC/FCC α/e interface at room temperature, following the Kurdjumov–Sachs (K–S) orientation relationship. The lower nucleation energy and interface energy are the reasons for the existence of abnormal e`-Cu at the interface. It is also found that the composition and cooling rate play key roles on the final phase structure. The alloys can be fully crystallized upon cooling down at a rate of 0.1 K/ps.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallic Glasses and Amorphous Alloys · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Thermodynamics of alloys and phase equilibria in the copper-iron system10.1361/105497103770330280 ↗
2. Mechanical properties and nanoparticles precipitation behavior of multi-component ultra high strength steel10.1016/j.matdes.2020.108637 ↗
3. Structural, mechanical, and tribological characterization of magnetic pulse compacted Fe–Cu bimetallic particles produced by electric explosion of dissimilar metal wires10.3390/met9121287 ↗
4. Strength and electrical conductivity of deformation-processed Cu-15 Vol Pct Fe alloys produced by powder metallurgy techniques10.1007/BF02669600 ↗
5. Effect of temperature on the strength and conductivity of a deformation processed Cu-20%Fe composite10.1007/BF01117911 ↗
6. Effect of composition and powder size on magnetic properties of rapidly solidified copper-iron alloys10.1016/j.jallcom.2018.01.245 ↗
7. Irradiation evolution of Cu precipitates in Fe1.0Cu alloy studied by positron annihilation spectroscopy10.1016/j.jnucmat.2017.11.011 ↗
8. Modeling copper precipitation hardening and embrittlement in a dilute Fe-0.3at%Cu alloy under neutron irradiation10.1016/j.jnucmat.2017.08.042 ↗
9. Correlation between Cu precipitates and irradiation defects in Fe–Cu model alloys investigated by positron annihilation spectroscopy10.1016/j.actamat.2015.10.051 ↗
10. As(V) removal capacity of FeCu bimetallic nanoparticles in aqueous solutions: the influence of Cu content and morphologic changes in bimetallic nanoparticles10.1016/j.jcis.2018.03.113 ↗
11. Change in magnetic properties of a cold rolled and thermally aged Fe–Cu alloy10.1063/1.3356227 ↗
12. Rapid solidification of bulk undercooled hypoperitectic Fe–Cu alloy10.1016/j.jallcom.2006.03.012 ↗
13. Nucleation and growth of γ-Fe precipitate in Cu-2%Fe alloy aged under high magnetic field10.1016/j.jallcom.2015.12.046 ↗
14. Dendrite remelting of petal-shaped iron-rich nanoparticles in Cu-2wt% Fe alloy at the nanoscale10.1016/j.matlet.2015.12.096 ↗
15. Tuning heterostructures with powder metallurgy for high synergistic strengthening and hetero-deformation induced hardening10.1016/j.msea.2020.139074 ↗
16. Effect of Cu presence on evolution of mechanical and magnetic properties in a novel Fe-based bulk metallic glass during partial annealing process10.1007/s11661-018-4976-6 ↗
17. High-resolution electron microscopy studies of the structure of Cu precipitates in α-Fe10.1080/01418619408242533 ↗
18. Multi-technique characterization of the precipitates in thermally aged and neutron irradiated Fe-Cu and Fe-Cu-Mn model alloys: atom probe tomography reconstruction implications10.1016/j.actamat.2017.12.006 ↗
19. Reversible disorder-order transitions in atomic crystal nucleation10.1126/science.aaz7555 ↗
20. Unique surface patterns emerging during solidification of liquid metal alloys10.1038/s41565-020-00835-7 ↗
21. Understanding pressure vessel steels10.1016/S1044-5803(99)00056-X ↗
22. An FIM-atom probe study of the precipitation of copper from lron-1.4 at. pct copper. Part I: field-ion microscopy10.1007/BF02669376 ↗
23. Small-angle neutron scattering study of phase decomposition in Fe–Cu binary alloy10.2320/matertrans1989.34.305 ↗
24. Competitive bcc and fcc crystal nucleation from non-equilibrium liquids studied by phase-field crystal simulation10.1016/j.actamat.2017.08.015 ↗
25. Atomistic mechanisms for temperature-induced crystallization of amorphous copper based on molecular dynamics simulation10.1016/j.commatsci.2018.04.057 ↗
26. Numerical evidence for bcc ordering at the surface of a critical fcc nucleus10.1103/PhysRevLett.75.2714 ↗
27. Kinetic pathways of crystallization at the nanoscale10.1038/s41563-019-0514-1 ↗
28. A mechanism of ferritin crystallization revealed by cryo-STEM tomography10.1038/s41586-020-2104-4 ↗
29. In situ TEM imaging of CaCO₃ nucleation reveals coexistence of direct and indirect pathways10.1126/science.1254051 ↗
30. Structural evolution of iron–copper (Fe–Cu) bimetallic Janus nanoparticles during solidification: an atomistic investigation10.1021/acs.jpcc.9b08411 ↗
31. Effect of cold-sintering parameters on structure, density, and topology of Fe-Cu nanocomposites10.3390/ma13030541 ↗
32. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
33. Ternary Fe–Cu–Ni many-body potential to model reactor pressure vessel steels: first validation by simulated thermal annealing10.1080/14786430903299824 ↗
34. Visualization and analysis of atomistic simulation data with OVITO–the open visualization tool10.1088/0965-0393/18/1/015012 ↗
35. Understanding atomic-scale phase separation of liquid Fe-Cu alloy10.1007/s11434-011-4739-x ↗
36. Liquid immiscibility in an Fe-Cu alloy by molecular dynamics simulation10.1088/0953-8984/24/50/505103 ↗
37. Specific heat capacity and dendritic growth kinetics of liquid peritectic Fe-Cu alloys10.1016/j.cplett.2016.06.059 ↗
38. Common mechanism for controlling polymorph selection during crystallization in supercooled metallic liquids10.1016/j.actamat.2018.09.055 ↗
39. The bcc-to-9R martensitic transformation of Cu precipitates and the relaxation process of elastic strains in an Fe-Cu alloy10.1080/01418610008212077 ↗
40. Phase transformation of Cu precipitates from bcc to fcc in Fe–3Si–2Cu alloy10.1016/j.actamat.2012.09.068 ↗
41. Evolution of defect structures during cold rolling of ultrafine-grained Cu and Cu–Zn alloys: influence of stacking fault energy10.1016/j.msea.2007.06.014 ↗
42. Metastable bcc-Cu precipitation behavior and its effect on microstructure and strengthening of as-cast Fe–B alloy containing 3 wt% copper content10.1088/2053-1591/aaf15e ↗
43. Toward controlled morphology of FeCu nanoparticles: Cu concentration and size effects10.1021/acs.jpcc.7b11556 ↗
44. The formation of supersaturated solid solutions in Fe–Cu alloys deformed by high-pressure torsion10.1016/j.actamat.2011.10.044 ↗
45. A critical consideration of magnetism and composition of (bcc) Cu precipitates in (bcc) Fe10.1007/s00339-010-5725-x ↗
46. Suppression of shear banding in high-strength Cu/Mo nanocomposites with hierarchical bicontinuous intertwined structures10.1080/21663831.2018.1431315 ↗
47. Transformation of shock-compressed copper to the body-centered-cubic structure at 180 GPa10.1103/PhysRevB.102.020103 ↗
48. The role of structural ledges at phase boundaries—III. F.C.C.-B.C.C. interfaces in Kurdjumov-Sachs orientation10.1016/0956-7151(94)90136-8 ↗
49. Microstructure and strengthening mechanisms in Cu/Fe multilayers10.1016/j.actamat.2012.08.005 ↗
50. Molecular dynamics simulation of nucleation from undercooled melt of nickel–aluminum alloy and discussion on polymorphism in nucleation10.2320/matertrans.MT-M2019353 ↗
51. Thermal properties, induction period, interfacial energy and nucleation parameters of solution grown benzophenone10.1007/s10973-007-8521-x ↗
52. Equilibrium adsorption at crystal-melt interfaces in Lennard-Jones alloys10.1063/1.2185628 ↗
53. Formation of crystal nuclei in liquid metals10.1063/1.1699435 ↗
54. Crystal–melt interfaces and solidification morphologies in metals and alloys10.1557/mrs2004.263 ↗
55. Study on the partitioning of alloying elements between bcc-Fe matrix and bcc-Cu precipitates and the corresponding effects on the precipitation interface10.1007/s11661-020-05929-4 ↗
56. Thermo-kinetic modeling of Cu precipitation in α-Fe10.1016/j.actamat.2015.08.042 ↗