Rate theory and experimental study of the irradiation induced defects in molybdenum alloy
Source abstract
Abstract
Abstract Molybdenum alloys were irradiated with 3 MeV Mo3+ to 1–10 dpa (displacement per atom) at 330 °C. Transmission electron microscopy (TEM) observation and rate theory simulation were performed to investigate the evolution of defects induced by irradiation. A large number of fine dislocation loops were induced after irradiation, and dislocation network appeared above 5 dpa. Both experiment and simulation show that the growth rates of dislocation loops and voids decrease with the dose, which can be attributed that interstitial atoms and vacancies annihilate with the previously existing defect clusters. No voids were observed in all irradiated specimens due to the inhibition of voids growth in high dose rate and the low mobility at 330 °C. Furthermore, simulation shows that higher dose rate and low temperature result in higher saturated volume densities of loops and voids. Voids appear earlier and are larger at higher temperatures because of active diffusion of vacancy at higher temperatures. The swelling and hardening peak temperature in ion irradiation were higher than that in neutron irradiation, which might be a temperature compensate for higher dose rate of ion irradiation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. The change in tensile properties of wrought LCAC molybdenum irradiated with neutrons10.1016/j.jnucmat.2003.05.001 ↗
2. Study of the temperature evolution of defect agglomerates in neutron irradiated molybdenum single crystals10.1016/j.jnucmat.2008.12.312 ↗
3. Microstructure and high-temperature mechanical properties of second-phase enhanced Mo-La2O3-ZrC alloys post-treated by cross rolling10.1016/j.jallcom.2019.04.348 ↗
4. Evaluating compressive property and hot deformation behavior of molybdenum alloy reinforced by nanoscale zirconia particles10.1016/j.jallcom.2020.158289 ↗
5. Study on thermal fatigue performance of the molybdenum plate doped with Al2O3 particles10.1016/j.jallcom.2020.153748 ↗
6. Research on high-temperature properties of the molybdenum sheet doped with 1.0 wt%Al2O3 particles10.1016/j.jallcom.2018.08.029 ↗
7. High temperature mechanical properties of TZM alloys under different lanthanum doping treatments10.1016/j.jallcom.2017.03.346 ↗
8. Microstructure and high temperature deformation behavior of the Mo-ZrO2 alloys10.1016/j.jallcom.2017.05.013 ↗
9. The change in the hardness of LCAC, TZM, and ODS molybdenum in the post-irradiated and annealed conditions10.1016/j.jnucmat.2009.04.025 ↗
10. Deformation and fracture properties in neutron irradiated pure Mo and Mo alloys10.1016/j.jnucmat.2008.03.004 ↗
11. Post-irradiation fracture toughness of unalloyed molybdenum, ODS molybdenum, and TZM molybdenum following irradiation at 244C to 507C10.1016/j.jnucmat.2013.05.027 ↗
12. Irradiation hardening in unalloyed and ODS molybdenum during low dose neutron irradiation at 300 °C and 600 °C10.1016/j.jnucmat.2008.08.052 ↗
13. Hardness and electrical resistivity of molybdenum in the post-irradiated and annealed conditions10.1016/j.jnucmat.2004.10.119 ↗
14. Tensile properties and fracture mode of a wrought ODS molybdenum sheet following fast neutron irradiation at temperatures ranging from 300 °C to 1000 °C10.1016/j.jnucmat.2005.06.020 ↗
15. Embrittlement of molybdenum-rhenium welds under low and high temperature neutron irradiation10.1016/j.jnucmat.2013.10.027 ↗
16. The swelling, microstructure, and hardening of wrought LCAC, TZM, and ODS molybdenum following neutron irradiation10.1016/j.jnucmat.2011.05.055 ↗
17. Was · 2020
18. Effects of nanosized precipitates on irradiation behavior of CoCrFeNi high entropy alloys10.1016/j.jallcom.2020.158291 ↗
19. Microstructure, strength and irradiation response of an ultra-fine grained FeNiCoCr multi-principal element alloy10.1016/j.jallcom.2020.156796 ↗
20. Characterization of ion induced damage as a function of depth in proton irradiated pure Ti and Ti–6Al–4V10.1016/j.jallcom.2019.153441 ↗
21. Microstructural evolution and hardening effect of 12Cr2W2Mn ferritic/martensitic steel under Au-ions irradiation10.1016/j.jallcom.2020.155360 ↗
22. Combining in situ transmission electron microscopy irradiation experiments with cluster dynamics modeling to study nanoscale defect agglomeration in structural metals10.1016/j.actamat.2012.03.055 ↗
23. Opportunities and limitations for ion beams in radiation effects studies: bridging critical gaps between charged particle and neutron irradiations10.1016/j.scriptamat.2017.06.041 ↗
24. T. Matsui, S. Muto, T. Tanabe, TEM study on deuterium-irradiation-induced defects in tungsten and molybdenum, 283–287, 2000, 1139–1143.10.1016/S0022-3115(00)00169-0 ↗
25. Recent work towards understanding defect evolution in thin molybdenum foils through in situ ion irradiation under TEM and coordinated cluster dynamics modeling10.1016/j.cossms.2011.11.001 ↗
26. Modeling dislocation evolution in irradiated alloys10.1007/BF02647229 ↗
27. Cluster dynamics modeling of the effect of high dose irradiation and helium on the microstructure of austenitic stainless steels10.1016/j.jnucmat.2015.11.007 ↗
28. Efficient simulation of kinetics of radiation induced defects: a cluster dynamics approach10.1016/j.jnucmat.2013.10.009 ↗
29. Microstructure modelling of ferritic alloys under high flux 1 MeV electron irradiations10.1016/S0022-3115(02)00776-6 ↗
30. An accurate scheme to solve cluster dynamics equations using a Fokker–Planck approach10.1016/j.cpc.2016.06.001 ↗
31. Automatic selection of methods for solving stiff and nonstiff systems of ordinary differential equations10.1137/0904010 ↗
32. Microstructural examination of neutron, proton and self-ion irradiation damage in a model Fe9Cr alloy10.1016/j.jnucmat.2020.152130 ↗
33. Guo · 2017
34. Radiation tolerance of neutron-irradiated model Fe-Cr-Al alloys10.1016/j.jnucmat.2015.06.023 ↗
35. Low temperature neutron irradiation effects on microstructure and tensile properties of molybdenum10.1016/j.jnucmat.2007.12.001 ↗
36. Effects of neutron irradiation on microstructure and deformation behaviour of mono- and polycrystalline molybdenum and its alloys10.1016/S0022-3115(98)00259-1 ↗
37. Predicting neutron damage using TEM with in situ ion irradiation and computer modeling10.1016/j.jnucmat.2017.10.023 ↗
38. Development of damage structure in 16Cr-4Al ODS steels during electron-irradiation10.1016/j.jnucmat.2011.02.037 ↗
39. Effect of different temperatures on He atoms behavior in α-Fe with and without dislocations
40. Defect microstructural equivalence in molybdenum under different irradiation conditions at low temperatures and low doses10.1016/j.commatsci.2015.11.045 ↗
41. Behaviors of bubble-loop complexes in He-irradiated CLAM steels at elevated temperatures10.1016/j.jnucmat.2019.151954 ↗
42. L.K. Mansur, Theory and experimental background on dimensional changes in irradiated alloys, 216, 1994, 97–123.10.1016/0022-3115(94)90009-4 ↗
43. Was · 2007
44. Vacancy migration in high‐temperature neutron‐irradiated molybdenum10.1002/pssa.19700020212 ↗
45. Correlation of neutron and heavy-ion damage. I. The influence of dose rate and injected helium on swelling in pure nickel10.1016/0022-3115(78)90513-5 ↗
46. Emulation of reactor irradiation damage using ion beams10.1016/j.scriptamat.2014.06.003 ↗