journal article·2021-06Open access

Influence of Nb on Ti diffusion in γ-TiAl intermetallics studied by mechanical spectroscopy

J. Ibáñez-Pérez, M.L. Nó, M. Oehring, H. Clemens, J.M. San Juan

Abstract

The development of intermetallic titanium aluminides has been driven by the aeronautic and aerospace industries because of the excellent mechanical properties and low density of γ-TiAl based alloys. Up to now, several generations of γ-TiAl based alloys were developed with increasing complexity of the alloy systems. Nb is one of the most important alloying elements in γ-TiAl alloys and although it is considered as a slow diffuser, its influence has not been fully quantified yet. In this work we demonstrate, through mechanical spectroscopy measurements conducted on several γ-TiAl based alloys with different Nb content, that Nb impedes the diffusion of Ti atoms in the α2-Ti3Al phase. Internal friction measurements show a relaxation peak P(α2), which is associated with short distance diffusion of Ti atoms in the α2 phase, involving stress-induced rotation of dipoles Al-VTi-Al, whose activation energy is dependent on the Nb content. The increase of the activation energy is quantified as ΔEa(Ti)= 0.037 eV × at% Nb, being attributed to the next-neighbor interaction of Nb atoms with the local configuration of Ti-VTi. This mechanism also produces a further broadening of the relaxation peak, which is attributed to the near-next-neighbor interactions for high Nb contents. Finally, an atomic model for the mechanism responsible for this relaxation is proposed allowing to explain the observed experimental behavior.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. 1995
2. D.P. Pope, C.T. Liu, S.H. Whang, M. Yamaguchi (Eds.), 4th Conference on High-Temperature Intermetallics, special issue of Mat. Sci. Eng. A 239–240 (1997) 1–928.10.1016/S0921-5093(97)00554-6 ↗
3. 1999
4. 2003
5. Processing and applications of intermetallic γ-TiAl-based alloys10.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO;2-U ↗
6. An advanced TiAl alloy for high-performance racing applications10.3390/ma13214720 ↗
7. Microstructure and deformation of two-phase γ-Titanium Aluminides10.1016/S0927-796X(97)00018-1 ↗
8. Appel · 2011
9. Novel design concepts for gamma-base titanium aluminide alloys10.1016/S0966-9795(00)00036-4 ↗
10. Recent progress on the development of gamma titanium aluminide alloys10.1002/1527-2648(200011)2:11<699::AID-ADEM699>3.0.CO;2-J ↗
11. Design of novel β-solidifying TiAl alloys with adjustable β/B2-phase fraction and excellent hot-workability10.1002/adem.200800164 ↗
12. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
13. Intermetallic β-solidifying γ-TiAl based alloys − from fundamental research to application10.1002/adem.201600735 ↗
14. Bewlay · 2012
15. TiAl alloys in commercial aircraft engines10.1080/09603409.2016.1183068 ↗
16. Forged intermetallic γ-TiAl based alloy low pressure turbine blade in the geared turbofan
17. Carbon distribution in multi-phase γ-TiAl based alloys and its influence on mechanical properties and phase transformation10.1016/j.actamat.2015.04.055 ↗
18. Enhancement of creep properties and microstructural stability of intermetallic β-solidifying γ-TiAl based alloys10.1016/j.intermet.2015.03.017 ↗
19. Silicon distribution and silicide precipitation during annealing in an advanced multi-phase γ-TiAl based alloy10.1016/j.actamat.2016.03.050 ↗
20. Mechanical behavior and related microstructural aspects of a nano-lamellar TiAl alloy at elevated temperatures10.1016/j.actamat.2017.02.050 ↗
21. Fatigue response of a grain refined TiAl alloy Ti-44Al-5Nb-1W–1B with varied surface quality and thermal exposure history10.1016/j.intermet.2017.01.010 ↗
22. On the high creep strength of the W containing IRIS-TiAl alloy at 850 °C10.1016/j.actamat.2019.09.056 ↗
23. Nowick · 1972
24. Introduction to mechanical spectroscopy: Phenomenology and definitions
25. Juan, Mechanical spectroscopy10.4028/www.scientific.net/MSF.366-368.32 ↗
26. Blanter · 2007
27. Internal friction measurements of γ-TiAl10.1016/S0966-9795(98)00100-9 ↗
28. Internal friction in γ-TiAl at high temperatures10.1016/S1359-6454(99)00110-X ↗
29. Internal friction of γ-TiAl alloys at high temperature10.1016/S0925-8388(00)00934-8 ↗
30. High temperature internal friction of Nb-containing γ-TiAl alloys
31. Internal friction of γ-TiAl-based alloys with different microstructures10.1016/j.msea.2003.03.002 ↗
32. High-temperature internal friction on TiAl intermetallics10.1016/j.msea.2003.07.011 ↗
33. Mechanical spectroscopy in advanced TiAl-Nb-Mo allloys at high temperature
34. Atomic relaxation processes in an intermetallic Ti-43Al-4Nb-1Mo-0.1B alloy studied by mechanical spectroscopy10.1016/j.actamat.2013.10.075 ↗
35. High temperature internal friction in a Ti-46Al-1Mo-0.2Si intermetallic, comparison with creep behaviour10.1016/j.actamat.2015.09.052 ↗
36. Internal friction and atomic relaxation processes in an intermetallic Mo-rich Ti-44Al-7Mo (γ+βo) model alloy10.1016/j.msea.2017.06.014 ↗
37. High-temperature phenomena in advanced intermetallic nano-lamellar γ-TiAl alloy. Part I: Internal friction and atomic relaxation processes10.1016/j.actamat.2020.09.025 ↗
38. Interstitial and substitutional diffusion of metallic solutes in Ti3Al10.1016/S0966-9795(98)00115-0 ↗
39. Diffusion in the Ti-Al system10.1016/S1359-6454(99)00400-0 ↗
40. γ-Titanium aluminide alloys: alloy design and properties
41. Metallurgical processing of titanium aluminides on industrial scale10.1016/j.intermet.2018.09.006 ↗
42. The effect of microstructure on the creep behavior of the Ti-16Al-1Mo-0.2Si alloy10.1016/j.intermet.2004.07.047 ↗
43. High performance very low frequency forced pendulum10.1016/j.msea.2003.07.023 ↗
44. High-temperature mechanical spectrometer for internal friction measurements10.4028/www.scientific.net/KEM.423.89 ↗
45. Activation energy of high temperature internal friction10.1016/0001-6160(64)90141-5 ↗
46. Interstitial solubility in γ and α2 phases of TiAl-based alloys10.1016/S1359-6454(96)00111-5 ↗
47. Effect of carbon addition on solidification behavior, phase evolution and creep properties of an intermetallic β-stabilized γ-TiAl alloy10.1016/j.intermet.2013.11.011 ↗
48. High carbon solubility in a γ-TiAl-based Ti-45Al-%Nb-0.5C alloy and its effect on hardening10.1016/j.actamat.2008.11.037 ↗
49. Investigation of carbides in Ti-45Al-5Nb-xC alloys (0≤x≤1) by transmission electron microscopy and high energy-XRD10.1016/j.intermet.2012.09.023 ↗
50. Preferential site occupancy of alloying elements in TiAl-based phases10.1063/1.4951009 ↗
51. Phase equilibria among α (hcp), β (bcc) and γ (L10) phases in Ti-Al base ternary alloys10.1016/S0966-9795(00)00015-7 ↗
52. The Al-B-Nb-Ti system IV. Experimental study and thermodynamic re-evaluation of the binay Al-Nb and ternary Al-Nb-Ti systems10.1016/j.jallcom.2008.05.008 ↗
53. Concentration and temperaure dependence of titanium self-diffusion and interdiffusion in the intermetallic phase Ti3Al10.1016/0966-9795(96)00060-X ↗
54. A new method for determining the heat of activation for relaxation processes10.1016/0001-6160(53)90047-9 ↗