Interfacial microstructure and mechanical properties of diffusion-bonded W–10Cu composite/AlN ceramic using Ni–P and Ti interlayers
Source abstract
Abstract
Abstract Cu/AlN joints are critical for applications in electronic components and high-power electronic devices. To prevent mechanical failures at the interface of the joints resulting from mismatched thermal expansion coefficient (CTE) between Cu and AlN, the W–Cu composite with lower CTE than pure Cu can be used. The choice of interlayers for the W–Cu/AlN joint and their microstructural evolution at the interface during diffusion bonding should be evaluated. In this study, the design and characterization of Ni–P and Ti interlayers for increasing the joint quality between diffusion-bonded W–10Cu (90 wt% W and 10 wt% Cu) and AlN were developed. The effects of the Ni–P interlayer thickness (1.0 and 3.5 µm) and bonding temperature (700 and 800 °C) on the microstructure and corresponding mechanical properties of the joints were investigated. The maximum average tensile strength for the joints reached 26.76 MPa with a Ni–P interlayer thickness of 3.5 µm and bonding temperature of 800 °C. In addition, the phase distribution from the W–10Cu to AlN was determined using X-ray diffraction and electron probe X-ray microanalysis, indicating sufficient diffusion of W–Ni and Ni–Ti in the interfacial zone of the W–10Cu/Ni–P/Ti/AlN joints. Moreover, Cu atoms in W–10Cu diffused into Ni-based layers, forming a solid solution. The fracture location in the joints was influenced by the bonding temperature and thermal shock test. The tensile strength of the joints decreased 20% after thermal shock testing for 100 cycles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Comparative studies on microstructures strengths and reliabilities of two types of AlN direct bonding copper substrates10.1016/j.ceramint.2018.07.131 ↗
2. J. Schilz-Harder, K. Exel, Recent developments of direct bonded copper (DBC) substrates for power modules, Fifth International Conference on Electronic Packaging Technology Proceedings (2003) 491–496.10.1109/EPTC.2003.1298787 ↗
3. Transient liquid phase bonding of AlN to AlSiC for durable power electronic packages10.1002/adem.201800039 ↗
4. Microstructure-thermal properties of Cu/Al2O3 bilayer prepared by direct bonding10.1016/j.jeurceramsoc.2012.09.015 ↗
5. Effects of isothermal annealing on the oxidation behavior, mechanical and thermal properties of AlN ceramics10.1016/j.ceramint.2017.04.098 ↗
6. Diffusion bonding of low carbon steel and pure zirconium with Cu-base amorphous interlayer10.1016/j.jmatprotec.2018.07.021 ↗
7. Effect of interface modification by Cu-coated W powders on the microstructure evolution and properties improvement for Cu–W composites10.1016/j.surfcoat.2016.01.014 ↗
8. The influence of modification route on the properties of W-0.3 wt%Y2O3 powder and alloy prepared by nano-in-situ composite method10.1016/j.jallcom.2018.09.163 ↗
9. Modeling of thermal stresses in a graded Cu/W joint10.1016/S0022-3115(02)00820-6 ↗
10. Synthesis and processing techniques of tungsten copper composite powders for electrical contact materials a review10.13005/ojc/350201 ↗
11. Recent progress in development of tungsten-copper composites: fabrication, modification and applications10.1016/j.ijrmhm.2018.03.014 ↗
12. Rapid consolidation of ultrafine grained W-30 wt% Cu composites by field assisted sintering from the sol-gel prepared nanopowders10.1016/j.jallcom.2017.07.023 ↗
13. Densification of W–10Cu ultrafine composite powder and the resulted thermal properties of sintered parts
14. Microstructure and mechanical properties of hot-pressed Al2O3/TiC ceramic composites with the additions of solid lubricants10.1016/j.ceramint.2004.05.009 ↗
15. Microstructure and mechanical properties of W/Cu vacuum diffusion bonding joints using amorphous Fe-W alloy as interlayer10.1016/j.vacuum.2015.01.008 ↗
16. Microstructure and mechanical properties of diffusion bonded joints between tungsten and F82H steel using a titanium interlayer10.1016/j.jallcom.2009.09.105 ↗
17. Effect of Ni interlayer on strength and microstructure of diffusion-bonded Mo/Cu joints10.1016/j.matlet.2011.08.077 ↗
18. Microstructural evolution and mechanical properties in the partial transient liquid phase diffusion bonding of tungsten to steel10.1016/j.ijrmhm.2018.02.002 ↗
19. Diffusion bonding of Al2O3–TiC composite ceramic and W18Cr4V high speed steel in vacuum10.1016/j.vacuum.2009.07.012 ↗
20. Effect of holding time on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer10.1016/j.msea.2009.04.043 ↗
21. Research on interface characteristics of tungsten alloy-HR2 steel joint
22. Diffusion bonding of a Cu–Cr–Zr alloy to stainless steel and tungsten using nickel as an interlayer10.1016/j.msea.2003.10.296 ↗
23. Stability and thermal reaction of GMR NiFe/Cu thin films10.1016/j.actamat.2005.03.038 ↗
24. The effect of surface condition on wetting of hastelloy®Χ by brazing filler metal of Ni–Pd–Cr–B–Si system10.1007/s11665-019-03998-0 ↗
25. Welding and joining of titanium aluminides10.3390/ma7074930 ↗
26. Interface compounds formed during the diffusion bonding of Al2O3 to Ti10.1023/A:1004815830980 ↗
27. Joining of the AMC composites reinforced with Ti3Al intermetallic particles by resistance butt welding10.1515/amm-2016-0143 ↗
28. Mallory · 2009
29. Thermal expansion of Ni–W, Ni–Cr, and Ni–Cr–W alloys between room temperature and 800 °C10.1007/s10765-009-0660-9 ↗
30. The metallurgical structure of eletroless nickle deposits: effect on coating properties
31. Properties of eletroless nickle at elevated temperature-a review10.1016/j.proeng.2014.12.321 ↗
32. ASTM D4541 Standard Test Method for Pull- Off Strength of Coatings Using Portable Adhesion Testers, ASTM International: West Conshohocken, PA, USA, 2010.
33. Microstructure and phase equilibria in the Ni–Al–W system10.1016/j.intermet.2008.04.003 ↗
34. Diffusion coefficients of transition metals in fcc cobalt10.1016/j.actamat.2017.04.060 ↗
35. Investigation of interdiffusion in copper-nickel bilayer thin films10.1016/j.physb.2006.05.014 ↗
36. Grain boundary segregation of Ni in W10.1016/0036-9748(84)90122-4 ↗
37. Development of a diffusion mobility database for Ni-base superalloys10.1016/S1359-6454(01)00383-4 ↗
38. Microstructure and mechanical properties of AlN/Cu brazed joints10.1007/s11665-014-1120-7 ↗
39. Adhesion strength and nucleation thermodymatics of four metal (Al, Cu, Ti, Zr) AlN substrates10.1016/j.apsusc.2015.08.243 ↗
40. Mechanical and thermodynamic properties of intermetallic compounds in the Ni–Ti system10.1142/S0217979217501612 ↗