journal article·2021-03

Sulfamic: acid incorporated tin oxide: Acidity and activity relationship

W.S. Abo El-Yazeed, M. Eladl, Awad I. Ahmed, Amr Awad Ibrahim

Publisher page

Abstract

Abstract Herein we study the activity and acidity relationship, Sulfamic acid (SA) has been incorporated with tin oxide (Sn). Acidity measurement confirmed the presence of dual-acidic sites. SA hinders the crystallization and inhibits SnO2 crystal growth. The particle size of SnO2 (2.1–8.2 nm) and the SBET values of samples were found to be dependent on the SA content and calcination temperatures. The increase in the surface acidity was found to occur with increasing the thermal treatment up to 450 °C, while further increasing of calcination temperature is accompanied by a decrease in the surface acidity. Lewis and Bronsted acid sites play important role in the catalytic activity, The SA-Sn nanoparticles are efficient for the synthesis of 14-aryl-14H-dibenzo[a,j] xanthene under solvent-free conditions in good to excellent yields and the sample contains 25 wt% SA has the highest activity than the others under the same reaction conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Industrial Gas Emission Control

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. A magnetic particle-supported sulfonic acid catalyst: tuning catalytic activity between homogeneous and heterogeneous catalysis10.1002/adsc.201100352 ↗
2. Sulfonic acid supported on hydroxyapatite-encapsulated-γ-Fe2O3 nanocrystallites as a magnetically separable catalyst for one-pot reductive amination of carbonyl compounds10.1039/c1gc15470b ↗
3. Study of alkylation on a Lewis and Brønsted acid hybrid catalyst and its industrial test10.1016/j.jiec.2013.11.017 ↗
4. Ordered mesoporous metal oxides: synthesis and applications10.1039/c2cs35086f ↗
5. Role of mixed metal oxides in catalysis science—versatile applications in organic synthesis10.1039/c2cy00490a ↗
6. Role of hot electrons and Metal–Oxide interfaces in surface chemistry and catalytic reactions10.1021/cr400311p ↗
7. Activity patterns of metal oxide catalysts in the synthesis of N-phenylpropionamide from propanoic acid and aniline10.1039/C4CY01504E ↗
8. The surface and materials science of tin oxide10.1016/j.progsurf.2005.09.002 ↗
9. Tuning of optical and electrical properties of wide band gap Fe:SnO2/Li:NiO p–n junctions using 80 MeV oxygen ion beam10.1007/s00339-016-0518-5 ↗
10. Catalytic activity of SnO2- and SO4/SnO2-containing clinoptilolite in the esterification of levulinic acid10.1016/j.micromeso.2018.12.009 ↗
11. Sensing mechanism of SnO2 gas sensors10.1007/BF00544217 ↗
12. A textile-based SnO2 ultra-flexible electrode for lithium-ion batteries10.1016/j.ensm.2018.08.002 ↗
13. Calcium and tin oxides for heterogeneous transesterification of Babasssu oil (Attalea speciosa10.1016/j.jece.2016.04.006 ↗
14. Biodiesel production from soybean oil transesterification using tin oxide-supported WO3 catalysts10.1016/j.fuproc.2012.09.053 ↗
15. SO4−2/SnO2–catalyzed cyclocondensation for the synthesis of fully functionalized pyridines10.1002/jhet.3806 ↗
16. Synthesis and characterization of new solid acid catalysts, H3PW12O40 supported on nanoparticle tin oxide: an efficient catalyst for the preparation of 7-hydroxy-4-methylcoumarin10.1016/j.apcata.2011.08.020 ↗
17. New metal extractants and super-acidic ionic liquids derived from sulfamic acid10.1039/C6CC02350A ↗
18. Efficient conversion of glucosamine to levulinic acid in a sulfamic acid-catalyzed hydrothermal reaction10.1039/C7RA12980G ↗
19. Ionic liquid-regulated sulfamic acid: chemoselective catalyst for the transesterification of β-ketoesters10.1016/S0040-4039(03)01187-0 ↗
20. Solvent-Free tetrahydropyranylation of alcohols with sulfamic acid as reusable catalyst10.1081/SCC-120026316 ↗
21. An efficient synthesis of 3,4-dihydropyrimidin-2-ones catalyzed by NH2SO3H under ultrasound irradiation10.1016/S1350-4177(03)00092-0 ↗
22. Sulfamic acid as a cost-effective and recyclable catalyst for liquid Beckmann rearrangement, a green process to produce amides from ketoximes without waste10.1016/j.tetlet.2004.03.017 ↗
23. Sulfamic acid and its N- and O-substituted derivatives10.1021/cr400230c ↗
24. l -proline as an efficient asymmetric induction catalyst in the synthesis of chromeno[2,3- d]pyrimidine-triones, xanthenes in water10.1016/j.tet.2017.05.025 ↗
25. Dowex-promoted general synthesis of N,N′-disubstituted-4-aryl-3,4-dihydropyrimidinones using a solvent-free Biginelli condensation protocol10.1016/j.tetlet.2006.04.061 ↗
26. Rapid, efficient and solvent-free synthesis of (un)symmetrical xanthenes catalyzed by recyclable sulfated polyborate10.1016/j.tetlet.2017.06.027 ↗
27. Highly efficient and environmentally friendly preparation of 14-Aryl-14H dibenzo[a,j]xanthenes catalyzed by tungsto-divanado-phosphoric acid10.1016/S1872-2067(11)60387-2 ↗
28. Synthesis and characterization of phosphate anchored MnO2 catalyzed solvent free synthesis of xanthene laser dyes10.1016/j.molcata.2014.04.035 ↗
29. !!! INVALID CITATION.
30. ZrO2 nanoparticles: an industrially viable, efficient and recyclable catalyst for synthesis of pharmaceutically significant xanthene derivatives10.1016/j.vacuum.2018.08.018 ↗
31. Heteropolyacid: an efficient and eco-friendly catalyst for the synthesis of 14-aryl-14H-dibenzo[a,j]xanthene10.1016/j.apcata.2007.02.016 ↗
32. Epoxides as a new feedstock for the synthesis of xanthene derivatives by using highly efficient, reusable tungstated zirconia heterogeneous catalyst10.1016/j.catcom.2017.01.001 ↗
33. CTA]Fe/MCM-41: an efficient and reusable catalyst for green synthesis of xanthene derivatives10.1016/j.arabjc.2016.06.017 ↗
34. Photocatalytic activity of mesoporous WO3/TiO2 nanocomposites for the photodegradation of methylene blue10.1016/j.inoche.2019.04.034 ↗
35. Monometallic and bimetallic Cu–Ag MOF/MCM-41 composites: structural characterization and catalytic activity10.1039/C9RA03310F ↗
36. Surface characterization and catalytic activity of sulfated tin oxide catalyst10.1016/j.catcom.2007.08.022 ↗
37. Determination of acid strength of solid superacids by temperature programmed desorption using pyridine10.1007/BF00810605 ↗
38. Nanostructure sulfated tin oxide as an efficient catalyst for the preparation of 7-hydroxy-4-methyl coumarin by Pechmann condensation reaction10.1016/j.molcata.2012.09.012 ↗
39. The effects of ammonium sulfate and sulfamic acid on the surface acidity of sulfated zirconia10.1016/j.jscs.2018.06.006 ↗
40. Synthesis and characterization of sulfamic acid supported on Fe3O4nanoparticles: a green, versatile and magnetically separable acidic catalyst for oxidation reactions and Knoevenagel condensation
41. Hydroxyapatite organofunctionalized with silylating agents to heavy cation removal10.1016/j.jcis.2006.07.010 ↗
42. Tailoring of textured transparent conductive SnO2:F thin films10.1016/j.jallcom.2013.05.108 ↗
43. Catalytic action of sulfated tin oxide for etherification and esterification in comparison with sulfated zirconia10.1016/j.apcata.2004.04.017 ↗
44. Synthesis of sulfamic acid supported on Cr-MIL-101 as a heterogeneous acid catalyst and efficient adsorbent for methyl orange dye10.1039/C8RA02941E ↗
45. Preparation, characterization, and modelling activity of potassium flouride modified hydrotalcite for microwave assisted biodiesel conversion10.1016/j.scp.2018.02.004 ↗
46. Supported 4-carboxybenzyl sulfamic acid on magnetic nanoparticles as a recoverable and recyclable catalyst for synthesis of 3,4,5-trisubstituted furan-2(5H)-one derivatives10.1016/j.jorganchem.2018.06.012 ↗
47. Magnetic CoFe2O4 nanoparticle immobilized N-propyl diethylenetriamine sulfamic acid as an efficient and recyclable catalyst for the synthesis of amides via the Ritter reaction10.1016/j.apcata.2014.06.006 ↗
48. Palladium nanoparticles incorporated within sulfonic acid-functionalized MIL-101(Cr) for efficient catalytic conversion of vanillin10.1039/C5TA03524D ↗
49. Structural, optical, thermal, mechanical and dielectric studies of sulfamic acid single crystals: an influence of dysprosium (Dy3+) doping10.1016/j.molstruc.2016.04.091 ↗
50. Structural characterization of sulfated zirconia and their catalytic activity in dehydration of ethanol10.1016/j.colsurfa.2007.09.043 ↗
51. Preparation of polydopamine sulfamic acid-functionalized magnetic Fe3O4nanoparticles with a core/shell nanostructure as heterogeneous and recyclable nanocatalysts for the acetylation of alcohols, phenols, amines and thiols under solvent-free conditions10.1039/C6GC01975G ↗
52. Nitrogen and sulfur Co-Doped 2D titanium carbides for enhanced electrochemical performance10.1149/2.1091709jes ↗
53. Efficient solid acid catalysts based on sulfated tin oxides for liquid phase esterification of levulinic acid with ethanol10.1016/j.apcata.2018.04.041 ↗
54. Nitrogen-doped carbon-encapsulated SnO2–SnS/graphene sheets with improved anodic performance in lithium ion batteries10.1039/C5TA06617D ↗
55. Sulfamic acid supported on Fe3O4@SiO2superpara magnetic nanoparticles as a recyclable heterogeneous catalyst for the synthesis of quinolines10.1039/C4RA06699E ↗
56. Characteristics of Au-doped SnO2–ZnO heteronanostructures for gas sensing applications10.1016/j.vacuum.2019.04.061 ↗
57. Solvent-free Mukaiyama-aldol condensation catalyzed by Ce–Al–MCM-41 mesoporous materials10.1016/j.micromeso.2011.03.027 ↗
58. Synergistic role of acid sites in the Ce-enhanced activity of mesoporous Ce–Al-MCM-41 catalysts in alkylation reactions: FTIR and TPD-ammonia studies10.1016/j.jcat.2006.10.022 ↗
59. Sulfonated diatomite as heterogeneous acidic nanoporous catalyst for synthesis of 14-aryl-14-H-dibenzo[a,j]xanthenes under green conditions10.1016/j.apcata.2014.03.012 ↗
60. Mesoporous tin oxide-supported phosphomolybdic acid as high performance acid catalysts for the synthesis of hydroquinone diacetate10.1016/j.colsurfa.2019.124248 ↗
61. Nano-sized mesoporous phosphated tin oxide as an efficient solid acid catalyst10.1039/C8RA08962K ↗
62. Palladium nanoparticles supported on a metal-organic framework-partially reduced graphene oxide hybrid for the catalytic hydrodeoxygenation of vanillin as a model for biofuel upgrade reactions10.1002/cctc.201600956 ↗
63. Sulfonic acid functionalized mesoporous SBA-15 for one-pot synthesis of substituted aryl-14H-dibenzo xanthenes and bis(indolyl) methanes10.1016/j.catcom.2010.06.004 ↗
64. Sulfamic acid: a novel and efficient catalyst for the synthesis of aryl-14H-dibenzo[a.j]xanthenes under conventional heating and microwave irradiation10.1016/j.tetlet.2005.10.057 ↗
65. Cellulose sulfuric acid: An efficient biodegradable and recyclable solid acid catalyst for the one-pot synthesis of aryl-14H-dibenzo[a.j]xanthenes under solvent-free conditions10.1016/j.molcata.2009.01.028 ↗
66. Functionalized mesoporous materials as efficient organocatalysts for the syntheses of xanthenes10.1016/j.molcata.2012.06.017 ↗