Fabrication of Al-Bi frozen emulsion alloys due to high-intense ultrasound irradiation
Source abstract
Abstract
Abstract The aim of this study is to develop an ultrasound-assisted process for fabrication of frozen emulsion alloys, which are a type of miscibility gap alloys (MGAs). Al-Bi system was used to produce 2-kg ingots of Al-Bi frozen emulsion alloys in the following two steps: (1) emulsification treatment of Al-Bi melt by introducing high-intense ultrasound vibrations into it in a temperature range of Al-Bi binodal decomposition, and (2) casting of the melt into a book mold. The ingot samples were analyzed with SEM/EDX for the alloy microstructure and bismuth particle distribution. Besides, cold model experiments, thermodynamic and CFD numerical simulations were performed to elucidate the underlying mechanisms of emulsification including droplet fragmentation and acoustic streaming. The results reveal that the alloys with Bi concentration of 4%~9.4% can be fabricated by the proposed technique. Within this range, 90% of Bi particles have a diameter under 10 µm, and the majority of them are incorporated into aluminum grains. Especially, a uniform microstructure is obtained when concentration of Bi is less than 6%. Emulsification was found to occur at the interface between two liquids when cavitation bubbles collapse in the interface vicinity followed by high-velocity micro-jetting which is responsible for the emulsion droplet formation. Another positive effect of ultrasound is acoustic streaming which is responsible for the effective agitation of molten bath preventing the sedimentation of Bi droplets during the ultrasound treatment and casting operation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ultrasound and Cavitation Phenomena · Nuclear Materials and Properties · Thermodynamic and Structural Properties of Metals and Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Liquid immiscible alloys10.1016/0927-796X(95)00180-8 ↗
2. Miscibility gap alloys with inverse microstructures and high thermal conductivity for high energy density thermal storage applications10.1016/j.applthermaleng.2012.11.029 ↗
3. Liquid immiscibility and core-shell morphology formation in ternary Al–Bi–Sn alloys10.1016/j.matchar.2013.04.006 ↗
4. Immiscible Liquid Metals and Organics
5. L2 droplet interaction with a-Al during solidification of hypermonotectic Al–8 wt% Bi alloys10.1016/j.actamat.2009.02.041 ↗
6. Segregation and immiscibility in liquid binary alloys10.1088/0034-4885/60/1/003 ↗
7. Heterogeneous nucleation in hypermonotectic aluminum alloys10.1088/1757-899X/27/1/012005 ↗
8. Inversion of a liquid Bi/Al metallic emulsion stabilized by solid SiC particles10.1016/j.colsurfa.2011.01.028 ↗
9. High-efficiency control of phase separation in Al-based immiscible alloys10.1016/j.jallcom.2015.03.194 ↗
10. Solidification of immiscible alloys: a review10.1007/s40195-016-0523-x ↗
11. Gelfgat, Y., MHD methods applied for production of composite materials of "frozen emulsion" type, Processing of Metals and Advanced Materials: Modeling, Design and Properties, 15–27, 1998, Proceedings Paper, International Symposium on Processing of Metals and Advanced Materials - Modeling, Design and Properties at the 1998 TMS Annual Meeting, San Antonio, TX, Feb 16–19 1998.
12. Schmid · Z. Elektrochem. · 1937 · 43 · 869
13. Properties of Al-Pb base alloys applying electromagnetic forces and ultrasonic vibration during casting10.1016/0167-577X(95)00275-8 ↗
14. Influence of Si addition on the microstructure and the properties of Al-Pb base alloys prepared under quasi-weightlessness condition10.1016/S0167-577X(96)00122-X ↗
15. Preparation of Al-Pb immiscible alloys in a high-intensity ultrasonic field
16. Eskin · 2014
17. A comparative study of ternary Al–Sn–Cu immiscible alloys prepared by conventional casting and casting under high-intensity ultrasonic irradiation10.1016/j.matchemphys.2011.09.020 ↗
18. Liquid phase separation and monotectic structure evolution of ternary Al62.6Sn28.5Cu8.9 immiscible alloy within ultrasonic field10.1016/j.matlet.2014.11.087 ↗
19. Three orthogonal ultrasounds fabricate uniform ternary Al-Sn-Cu immiscible alloy10.1038/srep36718 ↗
20. Comparison of oil-in-water emulsion between ultrasonic irradiation and mechanical stirring10.1002/ceat.201800139 ↗
21. Improving emulsion formation, stability and performance using mixed emulsifiers: a review10.1016/j.cis.2017.12.001 ↗
22. Influence of continuous phase viscosity on emulsification by ultrasound10.1016/S1350-4177(99)00029-2 ↗
23. Clift · 1978
24. Effect of sound intensity on dispersion and coagulation in ultrasonic emulsification10.1088/0508-3443/10/6/304 ↗
25. Microstructure formation in Al-Bi-Co immiscible alloys directionally solidified with different melt superheat temperatures10.1016/S1005-0302(10)60022-9 ↗
26. In situ synchrotron X-ray study of ultrasound cavitation and its effect on solidification microstructures10.1007/s11663-014-0256-z ↗
27. Synchrotron radiographic studies of ultrasonic melt processing of metal matrix nanocomposites10.1016/j.matlet.2015.11.022 ↗
28. Estimation of ultrasound induced cavitation bubble temperatures in aqueous solutions10.1016/j.ultsonch.2004.06.007 ↗
29. Acoustic cavitation and bubble dynamics
30. Physics of bubble oscillations10.1088/0034-4885/73/10/106501 ↗
31. Fragmentation of cavitation bubble in ultrasound field under small pressure amplitude10.1016/j.ultsonch.2019.104684 ↗
32. Sonoluminescence radiation from different concentrations of sulfuric acid10.1103/PhysRevE.80.046325 ↗
33. Ultrasound emulsification: effect of ultrasonic and physicochemical properties on dispersed phase volume and droplet size10.1016/j.ultsonch.2007.06.011 ↗
34. High-speed imaging of ultrasonic emulsification using a water-gallium system10.1016/j.ultsonch.2020.105387 ↗
35. Interfacial activity and emulsion stabilization of dissolved cellulose10.1016/j.molliq.2019.111325 ↗
36. Liquid jet directionality and droplet behavior during emulsification of two liquids due to acoustic cavitation10.1016/j.ultsonch.2019.104874 ↗
37. Cavitation and acoustic streaming generated by different sonotrode tips10.1016/j.ultsonch.2018.05.011 ↗
38. Role of acoustic streaming in formation of unsteady flow in billet sump during ultrasonic DC casting of aluminum alloys10.3390/ma12213532 ↗
39. Segrey Komarov, Yasuo Ishiwata, Aluminum alloy containing fine Bi droplets and its fabrication method. Japanese Patent Application, No. 2018-12878, Publication date: 25 January 2018.