journal article·2020-12

Mechanism for enhancing the corrosion resistance in a spray deposition aluminum alloy Al-8.31Zn-2.46Cu-2.07Mg-0.12Zr

Xiaofei Sheng, Yong Yang, Yajuan Cheng, Jing Li, Wenke Wu, Yu Liu, Kai Li, Yifan Zhao, Guoai He

Publisher page

Abstract

Abstract The ultra-high strength deformed aluminum alloy 7055 has been used as numerous components in aerospace field. Enhancing the corrosion resistance of 7055 alloy is always the emphasis and focus of current researches. In this article, we intentionally introduced an additional high-temperature pre-ageing process into the conventional T6 heat treatment of the spray deposited aluminum alloy Al-8.31Zn-2.46Cu-2.07Mg-0.12Zr to investigate the effect of pre-ageing time on the microstructure and property responses. We found that the corrosion resistance was significantly improved due to the formation of considerable amount of η phases, which served as the sites of grasping and releasing hydrogen atoms to reduce the concentration of hydrogen. The separated η phase formed on the grain boundary could break the consistency of original grain boundary, which would reduce the electrochemical driving force of intergranular corrosion and break the anode corrosion channel. The η phase on grain boundaries and (η′+η) inside grains were collectively served as positive electrode, while the matrix were served as the negative electrode, which leads to the etch of grain and grain boundary simultaneously.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Enhanced plasticity and corrosion resistance of high strength Al-Zn-Mg-Cu alloy processed by an improved thermomechanical processing10.1016/j.jallcom.2017.05.047 ↗
2. Influence of grain structure and crystallographic orientation on fatigue crack propagation behavior of 7050 alloy thick plate10.1016/j.ijfatigue.2014.03.009 ↗
3. Effects of pre-aging and minor Sc addition on the microstructure and mechanical properties of friction stir processed 7055 Al alloy10.1016/j.vacuum.2017.12.030 ↗
4. Effect of silver addition on mechanical properties and stress corrosion cracking in a predeformed and overaged 7055 aluminum alloy10.1520/JTE20170137 ↗
5. Effect of Sc addition, friction stir processing, and T6 treatment on the damping and mechanical properties of 7055 Al alloy10.1016/j.jallcom.2018.09.109 ↗
6. Effect of ZrO2 addition on mechanical properties and microstructure of Al-9Zn-6Mg-3Si matrix composites manufactured by squeeze casting
7. Effects of minor Sc addition on the microstructure and mechanical properties of 7055 Al alloy during aging10.1016/j.msea.2017.12.067 ↗
8. A study on the dynamic shock performance of 7055-T6I4 aluminum alloy based on experimental and simulation10.1016/j.vacuum.2018.08.042 ↗
9. Effect of pre-stretching on microstructures and mechanical behaviors of creep-aged 7055 Al alloy and its constitutive modeling10.3390/met9050584 ↗
10. Improvement of mechanical properties of a cryorolled Al-Mg-Si alloy through warm rolling and aging10.1016/j.jallcom.2018.11.012 ↗
11. Investigation ofmechanical and corrosion properties of an Al–Zn–Mg–Cu alloy under various ageing conditions and interface analysis of η′ precipitate10.1016/j.matdes.2015.06.183 ↗
12. Hot deformation behavior and microstructural evolution of as-quenched 7055 Al alloy fabricated by powder hot extrusion10.1016/j.matchar.2019.109833 ↗
13. Precipitation phenomena in an ultrafine-grained Al alloy10.1016/j.actamat.2012.12.037 ↗
14. Distinct hardening behavior of ultrafine-grained Al-Zn-Mg-Cu alloy10.1007/s11661-014-2498-4 ↗
15. Hot deformation behavior of spray-deposited Al-Zn-Mg-Cu alloy10.1016/j.matdes.2013.06.053 ↗
16. Prediction on hot deformation behavior of spray formed ultra-high strength aluminum alloy—a comparative study using constitutive models10.1016/j.jallcom.2017.11.331 ↗
17. Precipitation behavior and quenching sensitivity of a spray deposited Al-Zn-Mg-Cu-Zr alloy10.3390/ma10091100 ↗
18. Hot deformation behavior of a spray-deposited Al-8.31Zn-2.07Mg-2.46Cu-0.12Zr alloy10.3390/met7080299 ↗
19. Microstructure and tensile properties of large-size 7055 aluminum billets fabricated by spray forming rapid solidification technology10.1016/j.jallcom.2013.05.117 ↗
20. Effects of aging mechanisms on the exfoliation corrosion behavior of a spray deposited Al-Zn-Mg-Cu-Zr aluminum alloy10.1557/jmr.2017.64 ↗
21. Heating aging behavior of Al-8.35Zn-2.5Mg-2.25Cu alloy10.1016/j.matdes.2014.03.060 ↗
22. Investigation of fine scale precipitates in Al-Zn-Mg alloys after various heat treatments10.1016/S0921-5093(01)01876-7 ↗
23. Characterisation of the composition and volume fraction of η′ and η precipitates in an Al-Zn-Mg alloy by a combination of atom probe, small-angle X-ray scattering and transmission electron microscopy10.1016/j.actamat.2005.03.004 ↗
24. A trace element effect in alloys based on the aluminum-zinc- magnesium system10.1038/186303a0 ↗
25. The ageing characteristics of complex Al-Zn-Mg alloys, distinctive effects of copper and silver on the ageing mechanism
26. Pitting corrosion in cast 7XXX aluminium alloys and fibre reinforced MMCs10.1016/j.corsci.2003.09.003 ↗
27. Stress cossosion bihaviour of high strength AlZn alloys
28. The effect of copper content and degree of recrystallization on the fatigue resistance of 7XXX type Aluminum alloys. Pt. 1. Low cycle corrosion fatigue10.1016/0025-5416(79)90167-8 ↗
29. The effect of copper, chromium, and zirconium on the microstructure and mechanical properties of AI-Zn-Mg-Cu alloys10.1007/BF02851375 ↗
30. Influence of high-temperature pre-precipitation on local corrosion behaviors and ageing harden of 7055 aluminum alloy
31. Effect of aging conditions on the corrosion resistance of [Al−Zn−Mg and Al−Mg−Zn−Cu] alloys10.1007/BF00655585 ↗
32. Influence of retrogression and reaging treatment on intergranular and exfoliation corrosion of 1973 aluminum alloy
33. Effect of heat treatments on the tensile strength and SCC-resistance of AA7050 in an alkaline saline solution10.1016/j.corsci.2005.11.009 ↗
34. Size and shape dependent Gibbs free energy and phase stability of titanium and zirconium nanoparticles10.1016/j.matchemphys.2009.11.043 ↗
35. Size-, shape- and composition-dependent alloying ability of bimetallic nanoparticles10.1002/cphc.201100001 ↗
36. Electronic and thermoelectric properties of V2O5, MgV2O5, and CaV2O5
37. Size–temperature phase diagram of titanium nanosolids10.1021/jp208149d ↗
38. Gibbs free energy and size–temperature phase diagram of hafnium nanoparticles10.1021/jp200093a ↗
39. MoS2 heterostructure with tunable phase stability: strain induced interlayer covalent bond formation10.1039/C7NR02070H ↗
40. Brown · 1984
41. Improvements in mechanical and stress corrosion cracking properties in Al-alloy 7075 via retrogression and reaging10.1016/j.msea.2007.08.025 ↗
42. Retrogression and Re-ageing of 7075 aluminium alloy: microstructural characterization
43. The influence of zirconium on the early stages of aging of a ternary Al Zn Mg alloy10.1016/0956-7151(94)90406-5 ↗
44. Influence of grain-boundary pre-precipitation and corrosion characteristics of inter-granular phases on corrosion behaviors of an Al–Zn–Mg–Cu alloy10.1016/j.mseb.2012.04.008 ↗