journal article·2020-08

Influence of turning speed on the microstructure and properties of magnesium ZK60 alloy pre-processed via turning-induced-deformation

Sravya Tekumalla, Neelabh Gupta, Manoj Gupta

Publisher page

Abstract

Abstract In this work, magnesium ZK60 alloy is pre-processed by turning followed by compaction and extrusion of the chips. This work is aimed at studying the influence of varying turning speeds on the microstructure and properties of extruded ZK60 alloys. The findings of this study indicate that lower turning speeds resulted in generation of discontinuous chips which when consolidated led to bulk materials with lesser overall porosity. Further, the turning-induced-deformation in the chips plays a significant role in influencing the microstructure (grain size) and properties of the resultant (extruded) material. This study highlights the significance of low speed turning to obtain materials with superior mechanical properties and promotes cost and energy efficiency through recycling industrial metal swarf, which is a significant environmental and economic concern.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Machinability OF magnesium and its alloys
2. Machinability of aluminum and magnesium alloys
3. Automotive applications of magnesium and its alloys
4. Recycling automotive magnesium scrap10.1007/BF02701075 ↗
5. The assessment of plastic deformation in metal cutting10.1016/j.jmatprotec.2003.10.015 ↗
6. Fe3O4 nanoparticle-reinforced magnesium nanocomposites processed via disintegrated melt deposition and turning-induced deformation techniques10.3390/met9111225 ↗
7. Neslušan · 2013
8. A novel turning-induced-deformation based technique to process magnesium alloys10.3390/met9080841 ↗
9. Effect of Nd and Y on the microstructure and mechanical properties of ZK60 alloy10.1016/j.msea.2006.04.028 ↗
10. Enhancing overall static/dynamic/damping/ignition response of magnesium through the addition of lower amounts (<2%) of yttrium10.1016/j.jallcom.2016.07.324 ↗
11. An insight into ignition factors and mechanisms of magnesium based materials: a review10.1016/j.matdes.2016.09.103 ↗
12. Controlling the ignition and flammability of magnesium for aerospace applications10.1016/j.corsci.2014.04.047 ↗
13. Influence of cutting speed on the intensity of plastic deformation during hard cutting
14. Development of novel carbon nanotube reinforced magnesium nanocomposites using the powder metallurgy technique10.1088/0957-4484/17/1/002 ↗
15. Recrystallization of metals during hot deformation10.1098/rsta.1978.0010 ↗
16. Correlation between dynamic recrystallization and formation of rare earth texture in a Mg-Zn-Gd magnesium alloy during extrusion10.1038/s41598-018-35170-4 ↗
17. Improving tensile and compressive properties of an extruded AZ91 rod by the combined use of torsion deformation and aging treatment10.3390/ma10030280 ↗
18. Nucleation and growth during recrystallization10.1590/S1516-14392005000300002 ↗
19. Cumulative effect of strength enhancer—lanthanum and ductility enhancer—cerium on mechanical response of magnesium10.3390/met7070241 ↗
20. Strengthening due to the in-situ evolution of ß1′ Mg-Zn rich phase in a ZnO nanoparticles introduced Mg-Y alloy10.1016/j.scriptamat.2017.02.019 ↗
21. Extracting constitutive stress–strain behavior of microscopic phases by micropillar compression10.1007/s11837-012-0516-9 ↗
22. Detwinning and strain hardening of an extruded magnesium alloy during compression10.1016/j.scriptamat.2012.04.007 ↗
23. Mechanical properties of pre-strained austenitic stainless steel from the view of energy density10.1016/j.rinp.2018.05.034 ↗
24. A strong and deformable in-situ magnesium nanocomposite igniting above 1000 °C10.1038/s41598-018-25527-0 ↗
25. Preprocessing of powder to enhance mechanical and thermal response of bulk magnesium10.1016/j.mprp.2019.03.003 ↗
26. Effect of aging treatment on the damping capacity and mechanical properties of Mg-6Al-1Zn alloy
27. The effect of porosity on the microstructural damping response of 6061 aluminium alloy10.1007/BF00363342 ↗
28. Theory of mechanical damping due to dislocations10.1063/1.1722436 ↗
29. Effects of Zn on the microstructure, mechanical properties, and damping capacity of Mg–Zn–Y–Zr alloys10.1016/j.msea.2011.04.002 ↗
30. 3.23 - spray forming of MMCs