Experimental study on the mechanical strength and dynamic strain aging of Inconel 617 using small punch test
Source abstract
Abstract
Abstract In the present work, the mechanical strength and deformation characteristics of Inconel 617 were studied using small punch test at different temperatures and deformation rates. As temperature increases, small punch characteristic parameters decreases and three temperature intervals are defined. An important conclusion here is that dynamic strain aging phenomenon can be found at a high-temperature small punch deformation of Inconel 617 in a multi-axial stress state. Due to serration plastic flow, small punch characteristic parameters of Inconel 617 appear no significant changes in the temperature range from 300 °C to 700 °C. To describe dynamic strain aging behaviour, serration type, critical displacement, and maximum load drop are discussed. As the temperature increases or deformation rate decreases, the serration type of the load–displacement curve gradually changes from Type A to Type C, and maximum load drop increases. Meanwhile, critical displacement displays normal and inverse behaviour at different temperature ranges. Based on the deformation characteristics analysis, the mechanical strength of Inconel 617 in different aging states was analysed. Finally, the relationship between the mechanical strength, small punch characteristic parameters and hardness was established. The results show that small punch test is an effective method for reasonably estimating the mechanical strength and dynamic-strain aging behaviour of Inconel 617.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. A review on fundamental of high entropy alloys with promising high-temperature properties10.1016/j.jallcom.2018.05.067 ↗
2. High temperature cyclic oxidation of Ni based superalloys at different temperatures in air10.1016/j.jallcom.2017.05.130 ↗
3. Aging precipitation behavior and mechanical properties of Inconel 617 superalloy10.1007/s40195-012-0249-3 ↗
4. Microstructural investigation of oxide dispersion strengthened alloy 617 after creep rupture at high temperature10.1016/j.matchar.2018.02.031 ↗
5. Thermal fatigue testing of Inconel 617 and Stellite 6 alloys as potential tooling materials for thixoforming of steels10.1016/j.msea.2009.11.021 ↗
6. High temperature indentation based property measurements of IN-61710.1016/j.ijplas.2017.05.007 ↗
7. Comparative study on the high-temperature tensile and creep properties of Alloy 617 base and weld metal10.1007/s12206-013-0616-7 ↗
8. The deformation characteristics of alloy 800H and alloy 61710.1016/0167-6636(92)90016-7 ↗
9. Characterization of high temperature deformation behavior of INCONEL 61710.1016/j.mechmat.2008.10.003 ↗
10. Using heat sink technology to decrease residual stress in 316L stainless steel welding joint: finite element simulation10.1016/j.ijpvp.2012.01.002 ↗
11. Application of small punch creep test for Inconel 617 alloy weldment
12. Influence of dynamic strain aging on tensile deformation behavior of alloy 61710.1016/j.net.2016.06.013 ↗
13. Tensile deformation behavior and microstructure evolution of Ni-based superalloy 61710.1016/j.jnucmat.2014.08.003 ↗
14. Mechanical behaviour and strain rate sensitivity analysis of TA2 by the small punch test10.1016/j.tafmec.2018.11.002 ↗
15. CWA 15627 · 2006
16. Application of small punch test to investigate mechanical behaviours and deformation characteristics of Incoloy800H10.1016/j.jallcom.2018.06.243 ↗
17. Occurrence of dynamic strain aging in Alloy 617M under low cycle fatigue loading10.1016/j.ijfatigue.2017.03.001 ↗
18. Strain rate sensitivity of alloys 800H and 617
19. Dynamic strain ageing, deformation, and fracture behavior of modified 9Cr-1Mo steel10.1016/j.msea.2014.10.011 ↗
20. Mechanism of dynamic strain aging and characterization of its effect on the low-cycle fatigue behavior in type 316L stainless steel10.1016/j.jnucmat.2004.12.012 ↗
21. Tensile deformation behavior of a nickel based superalloy at different temperatures10.1016/j.msea.2014.01.056 ↗
22. Influence of γ′ precipitates on the critical strain and localized deformation of serrated flow in Ni-based superalloys10.1016/j.jallcom.2016.08.194 ↗
23. Microstructure of long-term aged IN617 Ni-base superalloy10.1007/s11661-008-9618-y ↗
24. Estimation of the mechanical properties of metallic materials by means of the small punch test10.1016/j.jallcom.2013.08.009 ↗
25. Estimation of yield and ultimate stress using the small punch test method applied to non-standard specimens: a computational study validated by experiments10.1016/j.ijmecsci.2017.11.040 ↗