journal article·2019-10

Hollow and hierarchical Li1.2Mn0.54Ni0.13Co0.13O2 micro-cubes as promising cathode materials for lithium ion battery

Chun-Sheng Xu, Wei-Feng Jiang, Hai-Tao Yu, Chen-Feng Guo, Ying Xie, Ning Ren, Ting-Feng Yi

Publisher page

Abstract

Abstract Based on the Mn0.806Co0.194CO3 precursors, Li1.2Mn0.54Ni0.13Co0.13O2 micro-cube (MC-LMNC) was prepared. The as-prepared sample is hollow and possesses a shell of about 200 nm, which is assembled by a series of nano particles (∼50 nm). X-ray diffraction and Raman spectroscopy confirmed that the materials obtained are well crystalline and have a good layered structure. The electron microscopy showed that the micro-cubes disperse uniformly and have a hierarchical structure. In comparison to the sample obtained by a sol-gel method (SG-LMNC), LNMC micro-cube has a much better electrochemical performance. The average discharge capacities for SG-LMNC sample are 276.6, 220.1, 155.8, 97.9, 66.7, and 40.3 mAh g−1 at a 0.1, 0.2, 0.5, 1.0, 3.0, and 5.0 C respectively, while those for MC-LMNC are 302.5, 241.2, 190.5, 145.4, 103.8, and 70.6 mAh g−1 at the same rates. EIS measurements confirmed that the diffusion coefficients for SG-LMNC and MC-LMNC are 1.13 × 10−16 and 1.61 × 10−16 cm2 s−1. The origin of the performance differences can be attributed to the different morphology, surface area, and pore size of the two samples, which has been verified by the BET analysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. The Li-ion rechargeable battery: a perspective10.1021/ja3091438 ↗
2. The path towards sustainable energy10.1038/nmat4834 ↗
3. On the challenge of developing advanced technologies for electrochemical energy storage and conversion10.1016/j.mattod.2014.02.014 ↗
4. Direct visualization of Li dendrite effect on LiCoO2 cathode by in situ TEM
5. Physical and chemical characterization of LiCoO2 cathode material extracted from commercial cell phone batteries with low and high states of health10.1016/j.matchemphys.2018.04.038 ↗
6. Size-dependent phase morphologies in LiFePO4 battery particles10.1016/j.elecom.2018.08.015 ↗
7. Mechanical, thermal and electrical properties of LiFePO4/MWCNTs composite electrodes10.1016/j.matlet.2018.07.068 ↗
8. Micron-sized monocrystalline LiNi1/3Co1/3Mn1/3O2 as high-volumetric-energy-density cathode for lithium-ion batteries10.1039/C8TA03363C ↗
9. Improved high rate capacity and lithium diffusion ability of LiNi1/3Co1/3Mn1/3O2 with ordered crystal structure10.1149/2.010205jes ↗
10. Synthesis and electrochemical performance of spinel-type LiMn2O4 using γ-MnOOH rods as self-template for lithium ion battery10.1016/j.jpowsour.2012.07.118 ↗
11. LiMn2O4 as strong polysulfides adsorption carrier for high performance lithium-sulfur batteries10.1016/j.ssi.2017.12.004 ↗
12. Quantifying hysteresis and voltage fade in xLi2MnO3·(1-x)LiMn0.5Ni0.5O2 electrodes as a function of Li2MnO3 content10.1149/2.049403jes ↗
13. Metal oxide coated cathode materials for Li ion batteries – a review10.1016/j.jallcom.2019.06.194 ↗
14. Improving the electrochemical performances of Li-rich Li1.20Ni0.13Co0.13Mn0.54O2 through a cooperative doping of Na+ and PO43− with Na3PO410.1016/j.jpowsour.2017.11.042 ↗
15. Al2O3 coating on Li1.256Ni0.198Co0.082Mn0.689O2.25 with spinel-structure interface layer for superior performance lithium ion batteries10.1016/j.electacta.2017.12.120 ↗
16. Direct visualization of the reversible O2-/O- redox process in Li-rich cathode materials
17. Elucidating anionic oxygen activity in lithium-rich layered oxides10.1038/s41467-018-03403-9 ↗
18. Requirements for reversible extra-capacity in Li-rich layered oxides for Li-ion batteries10.1039/C6EE02328B ↗
19. Review-Li-Rich layered oxide cathodes for next-generation Li-ion batteries: chances and challenges10.1149/2.0111514jes ↗
20. Preparation of Li-rich layered-layered type xLi2MnO3·(1-x)LiMnO2 nanorods and its electrochemical performance as cathode material for Li-ion battery10.1016/j.jpowsour.2017.04.002 ↗
21. Enhanced cycling stability of Li-rich nanotube cathodes by 3D graphene hierarchical architectures for Li-ion batteries10.1016/j.actamat.2016.04.010 ↗
22. Preparation and electrochemical performance of ball-like LiMn0.4Ni0.4Co0.2O2 cathode materials10.1016/j.electacta.2012.05.110 ↗
23. Hierarchical Li1.2Ni0.2Mn0.6O2 nanoplates with exposed {010} planes as high-performance cathode material for lithium-ion batteries10.1002/adma.201402541 ↗
24. Li1.2Mn0.54Ni0.13Co0.13O2 hollow hierarchical microspheres with enhanced electrochemical performances as cathode material for lithium-ion battery application10.1016/j.electacta.2017.03.201 ↗
25. Core–shell and concentration-gradient cathodes prepared via co-precipitation reaction for advanced lithium-ion batteries10.1039/C6TA10297B ↗
26. One-pot synthesis of lithium-rich cathode material with hierarchical morphology10.1021/acs.nanolett.6b03296 ↗
27. Three-dimensional porous Sn–Cu alloy anode for lithium-ion batteries10.1016/j.electacta.2010.07.015 ↗
28. Hollow porous hierarchical-structured 0.5Li2MnO3·0.5LiMn0.4Co0.3Ni0.3O2 as a high-performance cathode material for lithium-ion batteries10.1021/acsami.6b09118 ↗
29. Controllable synthesis of hierarchical ball-in-ball hollow microspheres for a high performance layered Li-rich oxide cathode material10.1039/C7TA02553J ↗
30. Hollow Li1.2Mn0.5Co0.25Ni0.05O2 microcube prepared by binary template as a cathode material for lithium ion batteries10.1016/j.jpowsour.2014.02.011 ↗
31. Double-shelled hollow microspheres of LiMn2O4 for high-performance lithium ion batteries10.1039/c1jm10924c ↗
32. Hollow 0.3Li2MnO3·0.7LiNi0.5Mn0.5O2 microspheres as a high-performance cathode material for lithium-ion batteries10.1039/c2cp44394e ↗
33. Enhanced electrochemical performance of Li1.2Mn0.54Ni0.13Co0.13O2 via L-ascorbic acid-based treatment as cathode material for Li-ion batteries10.1149/2.1481809jes ↗
34. Double-shelled CoMn2O4 hollow microcubes as high-capacity anodes for lithium-ion batteries10.1002/adma.201104407 ↗
35. A facile route to synthesize multiporous MnCo2O4 and CoMn2O4 spinel quasi-hollow spheres with improved lithium storage properties10.1039/c2nr33576j ↗
36. Hierarchical mesoporous lithium-rich Li[Li0.2Ni0.2Mn0.6]O2 cathode material synthesized via ice templating for lithium-ion battery10.1021/acsami.6b04687 ↗
37. A study on storage characteristics of pristine Li-rich layered oxide Li1.20Mn0.54Co0.13Ni0.13O2: effect of storage temperature and duration10.1016/j.electacta.2014.12.071 ↗
38. High-performance Li-rich layered transition metal oxide cathode materials for Li-ion batteries10.1149/2.0511903jes ↗
39. High-performance xLi2MnO3·(1-x)LiMn1/3Co1/3Ni1/3O2 (0.1 ≤ x ≤ 0.5) as cathode material for lithium-ion battery10.1016/j.electacta.2015.12.036 ↗
40. Structure tuned Li1.2Mn0.6Ni0.2O2 with low cation mixing and Ni segregation as high performance cathode materials for Li-ion batteries10.1016/j.electacta.2018.01.104 ↗
41. First-cycle simulation for Li-rich layered oxide cathode material xLi2MnO3⋅(1-x)LiMO2 (x= 0.4)10.1149/2.0671811jes ↗
42. All-solid-state lithium battery with LiCo0.3Ni0.7O2 fine powder as cathode materials with an amorphous sulfide electrolyte10.1149/1.1471540 ↗
43. Vibrational spectroscopic and electrochemical studies of the low and high temperature phases of LiCo1-xMxO2, (M = Ni or Ti)10.1016/0167-2738(96)00158-0 ↗
44. Synthesis of single crystalline hexagonal nanobricks of LiNi1/3Co1/3Mn1/3O2 with high percentage of exposed {010} active facets as high rate performance cathode material for lithium-ion battery10.1039/c3ta01618h ↗
45. Suppression of voltage decay and improvement in electrochemical performance by zirconium doping in Li-rich cathode materials for Li-ion batteries10.1149/2.0751813jes ↗
46. Nanoarchitecture multi-structural cathode materials for high capacity lithium batteries10.1002/adfm.201200536 ↗
47. beta-MnO2 sacrificial template synthesis of Li1.2Ni0.13Co0.13Mn0.54O2 for lithium ion battery cathodes10.1039/c3ra45428b ↗
48. Self-directed chemical synthesis of lithium-rich layered oxide Li[Li0.2Ni0.2Mn0.6]O2 with tightly interconnected particles as cathode of lithium ion batteries with improved rate capability10.1016/j.electacta.2014.02.037 ↗
49. First-principles study on lithium removal from Li2MnO310.1016/j.jpowsour.2008.07.073 ↗
50. The origins and mechanism of phase transformation in bulk Li2MnO3: first-principles calculations and experimental studies10.1039/C5TA00944H ↗
51. Mechanism of oxygen vacancy on impeded phase transformation and electrochemical activation in inactive Li2MnO310.1002/celc.201600067 ↗
52. Retarded phase transition by fluorine doping in Li-rich layered Li1.2Mn0.54Ni0.13Co0.13O2 cathode material10.1016/j.jpowsour.2015.02.085 ↗
53. Gel-combustion synthesis of Li1.2Mn0.4Co0.4O2 composites with a high capacity and superior rate capability for lithium-ion batteries10.1039/C3TA13920D ↗
54. Performance and design considerations for lithium excess layered oxide positive electrode materials for lithium ion batteries10.1039/C5EE03573B ↗
55. Tailoring anisotropic Li-ion transport tunnels on orthogonally arranged Li-rich layered oxide nanoplates toward high-performance Li-ion batteries10.1021/acs.nanolett.6b04951 ↗
56. Nanoscale surface modification of lithium-rich layered-oxide composite cathodes for suppressing voltage fade10.1002/anie.201506408 ↗
57. Electrochemical performance of zirconium doped lithium rich layered Li1.2Mn0.54Ni0.13Co0.13O2 oxide with porous hollow structure10.1016/j.jpowsour.2015.09.025 ↗
58. Synthesis, characterisation and electrochemical intercalation kinetics of nanostructured aluminium-doped Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode material for lithium ion battery10.1016/j.electacta.2012.08.074 ↗