journal article·2019-10

Influence of crystalline structure on diffusion barrier property of electroless Ni–Fe–P coatings in Zn–Al solder interconnects

Li Liu, Han Zhang, Hao Zheng, Juan Peng, Pan Gong, Xuanguo Wang, Zhiwen Chen, Xueqiang Cao

Publisher page

Abstract

Abstract The rapid growth of interfacial Cu–Zn intermetallic compounds (IMCs) at Zn–Al/Cu solder interfaces significantly deteriorates their integrity due to the physical mismatch of interface materials. Thus, a robust interlayer to inhibit the interactions between solder and substrate at elevated temperature is urgently required. In this work, ternary Ni–Fe–P coatings with various crystalline structure were electroless plated on Cu substrates to investigate their interfacial reactions and diffusion barrier properties in Zn–Al solder interconnects. It was found that Ni–Fe–P coatings can significantly suppress the growth of interfacial IMCs in Zn–Al solder interconnects during liquid-solid reaction. Moreover, crystalline structure of Ni–Fe–P coatings played a vital role in the interfacial reactions and microstructural evolutions at the Zn–Al/Ni–Fe–P interfaces. The Ni–Fe–P coating with mixed structure (amorphous + crystalline) exhibited the best diffusion barrier properties among three types of the coatings for the thinnest and void-free Al 3 Ni 2 layer, while crystalline Ni–Fe–P coating is the worst due to not only the rapidly growth of Al 3 Ni 2 and Fe 2 Al 5 phases but also the spalling phenomenon of Al 3 Ni 2 particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallic Glasses and Amorphous Alloys · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. High lead solder (over 85%) solder in the electronics industry: RoHS exemptions and alternatives10.1007/s10854-015-2940-4 ↗
2. Comparative thermal and structural characterization of sintered nano-silver and high-lead solder die attachments during power cycling10.1109/TDMR.2018.2825386 ↗
3. Fast scanning calorimetric study of nucleation rates and nucleation transitions of Au-Sn alloys10.1016/j.scriptamat.2017.06.004 ↗
4. Microstructures and properties of Bi-10Ag high temperature solder doped with Cu element10.1016/j.microrel.2017.11.013 ↗
5. Bonding technology based on solid porous Ag for large area chips10.1016/j.scriptamat.2017.11.035 ↗
6. Microstructural evolution of SiC joints soldered using Zn-Al filler metals with the assistance of ultrasound10.1016/j.ultsonch.2018.02.037 ↗
7. Microstructure and solderability of Zn-6Al-xSn solders10.1007/s11664-015-3651-6 ↗
8. Microstructural and damp-heat corrosion characteristics of Zn-2wt%Al solder alloys containing trace Ag10.1088/2053-1591/aaef50 ↗
9. Diffusion barrier property of electroless Ni-W-P coating in high temperature Zn-5Al/Cu solder interconnects10.1016/j.jallcom.2017.06.122 ↗
10. Influence of intermetallic growth on the mechanical properties of Zn-Sn-Cu-Bi/Cu solder joints10.1016/j.jallcom.2015.07.231 ↗
11. Micro-mechanical and fracture characteristics of Cu6Sn5 and Cu3Sn intermetallic compounds under micro-cantilever bending10.1016/j.intermet.2016.06.004 ↗
12. Employment of a bi-layer of Ni(P)/Cu as a diffusion barrier in a Cu/Sn/Cu bonding structure for three-dimensional interconnects10.1016/j.actamat.2013.07.043 ↗
13. Interfacial IMC growth of SAC305/Cu joint with a novel dual-layer of Ni(P)/Cu plating during solid-state aging10.1016/j.mee.2018.07.020 ↗
14. Properties and application of polyimide-based composites by blending surface functionalized boron nitride nanoplates10.1002/app.41889 ↗
15. A Fe-promoted Ni-P amorphous alloy catalyst (Ni-Fe-P) for liquid phase hydrogenation of m- and p- chloronimtrobenzene10.1016/j.molcata.2006.01.060 ↗
16. Amorphous metallic NiFeP: a conductive bulk material achieving high activity for oxygen evolution in both alkaline and acidic media10.1002/adma.201606570 ↗
17. Application of electroless Fe-42Ni(P) film for under-bump metallization on solder joint10.1016/j.jmst.2012.12.006 ↗
18. Interfacial reaction between Sn-Ag-Cu solder and Co-P films with various microstructures10.1016/j.actamat.2013.04.027 ↗
19. Influence of the P content on phase formation in the interfacial reactions between Sn and electroless Co(P) metallization on Cu substrate10.1016/j.jallcom.2014.09.017 ↗
20. Theoretical calculation of absolute radii of atoms and Ions. Part 1. The Atomic Radii10.3390/i3020087 ↗
21. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
22. Interface reaction between an electroless Ni-Co-P metallization and Sn-3.5Ag lead-free solder with improved joint reliability10.1016/j.actamat.2014.02.026 ↗
23. Influence of the specific surface area of a porous nickel to the intermetallic compound generated by reaction of a porous nickel and aluminum10.1007/s12540-014-4019-9 ↗
24. Formation and growth kinetics of intermediate phases in Ni-Al diffusion couples10.1007/s11595-009-5787-9 ↗
25. Kinetics of Fe2Al5 phase formation on 4130 steel by Al pack cementation and its oxidation resistance10.1007/s12540-015-1001-0 ↗
26. Assessment of the Fe–Ni–Al system10.1016/j.intermet.2005.11.021 ↗
27. Formation of the ζ phase at an interface between an Fe substrate and a molten 0.2 mass% Al-Zn during galvannealing10.1016/S1359-6454(00)00037-9 ↗
28. Interfacial reactions of solid Co and solid Fe with liquid Al10.1016/j.corsci.2012.04.015 ↗
29. Study of microstructure and phase evolution of hot-dipped aluminide mild steel during high-temperature diffusion using electron backscatter diffraction10.1016/j.apsusc.2010.12.118 ↗
30. Effect of immersion Ni plating on interface microstructure and mechanical properties of Al/Cu bimetal10.1016/S1003-6326(14)63238-6 ↗