journal article·2019-09

Influence of boron contents on microstructure, mechanical properties and shielding effect of Fe–W–C alloy

Tang Dewen, Zou Shuliang, Yan Liang

Publisher page

Abstract

Abstract By using vacuum sintering method, the shielding materials made of iron-tungsten-carbon-boron (Fe–W–C–B) alloys with different boron (B) contents were prepared. The influences of different B contents on mechanical properties, shielding performance and microstructures of the alloys were investigated. The research results showed that with increasing B content, the fracture of alloys changed from plastic to brittle fractures and the higher the B content was, the more serious the brittle fracture. Moreover, the content of brittle amorphous phase FeWB increased and therefore the hardness and density of alloys increased at first and then reduced. When the B content was 2.5%, the alloy phase was mainly composed of Fe2B, Fe3(C, B) and α-Fe phases, with compact microstructure, shown as continuous network microstructure and tiny, long, round rod-like microstructure. In this case, the density, tensile strength and hardness of alloys were 10.05 g/cm 3 , 410 MPa and 468 HV, respectively. The γ-ray shielding performance of the alloy reduced at first, then increased and finally declined with the increase of B contents. When the B content was 1.5%, the half-value thickness reached to the minimum (about 6.36 mm). The transmittance of neutron shields reduced at first and then increased in a low-energy zone (0–4 MeV). When the B content was 2.5%, the alloys showed the lowest transmittance about 0.10842.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Radiation Shielding Materials Analysis · Graphite, nuclear technology, radiation studies · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Comparison and physical interpretation of MCNP and TARTneutron andγMonte Carloshieldingcalculations for a heavy-ion ICF system10.1016/S0168-583X(03)01602-1 ↗
2. The design, bulid and test of a digital analyzer for mixed radiation fields10.1109/TNS.2010.2044245 ↗
3. Development of neutron shielding material using metathesis-polymer matrix10.1016/j.nima.2003.11.420 ↗
4. Evaluation of shielding performance for newly developed compositematerials10.1016/j.anucene.2018.01.022 ↗
5. Thermodynamic aspects of liquid phase sintering B-containing P/MStainless steels10.4028/www.scientific.net/SSP.172-174.1164 ↗
6. KuangJiacai · 2009 · 32
7. The comparison between simple and advanced shielding materials for the shield of portable neutron sources
8. Study of gamma radiation attenuation properties of some selectedternary alloys10.1016/j.jallcom.2018.12.221 ↗
9. An extensive investigation on gamma ray shielding features of Pd/Agbasedalloys10.1016/j.net.2018.12.014 ↗
10. High capacity hard carbon anodes for sodium ion batteries in additive free electrolyte10.1016/j.elecom.2012.10.038 ↗
11. The design, fabricationand properties of B4C/Al neutron absorbers10.1016/j.jnucmat.2013.02.050 ↗
12. Comparison of the effects of cadmium-shielded and boron carbide-shielded irradiation channel of the Ghana Research Reactor-110.1016/j.nucengdes.2010.05.005 ↗
13. The design, microstructure and mechanical properties of B4C/6061Al neutron absorber composites fabricated by SPS10.1016/j.matdes.2016.01.030 ↗
14. Phase identification of Al–B4C ceramic composites synthesized by reaction hot-press sintering10.1016/j.ijrmhm.2009.11.004 ↗
15. Research progress in shielding materials for nuclear radiation
16. Structure and capability of a new Pb-based composite shielding Material
17. Evaluation of vacuum plasma-sprayed boron carbide protection for the stainless steel first wall of WENDELSTEIN 7-X10.1016/j.jnucmat.2004.04.214 ↗
18. Vacuum plasma-sprayed tungsten on EUROFER and 316L: results of characterisation and thermal loading tests10.1016/j.fusengdes.2005.06.240 ↗
19. Further study of boron-10 loaded liquid scintillators for detection of fast and thermal neutrons10.1109/TNS.2009.2037223 ↗
20. Fabrication of Ni, Cr, W reinforced new high alloyed stainless steels forradiation shielding applications10.1016/j.rinp.2018.11.038 ↗
21. The radiobiological principles of boron neutron capture therapy: a critical review10.1016/j.apradiso.2011.04.019 ↗
22. Review on the addition of boron compounds to radiation shielding concrete10.1016/j.pnucene.2010.09.012 ↗
23. Influence of microelement Hf on microstructure, mechanical properties and shielding effect of W-Ni-Fe alloy10.1016/j.jallcom.2017.07.037 ↗