journal article·2019-04

Investigation of nanomechanical and adhesion behavior for AlN coating and AlN/Fe2-3N composite coatings created by Active Screen Plasma Nitriding on Al 1050

K. Taherkhani, M. Soltanieh

Publisher page

Abstract

Abstract This study investigated the effect of nitriding time and temperature on the mechanical properties of the composite AlN/Fe2-3N coating deposited on the pure aluminium substrate using the novel Active Screen Plasma Nitriding (ASPN) method. ASPN treatment was performed for 2, 5, 10, 15 h at temperatures of 450,500, and 550 °C and Conventional Plasma Nitriding (CPN) treatment was carried out for 5 h at 500 °C. All treatments were performed at the 10 KHz frequency with 80% duty cycle on the Al1050 substrate under 20%H2+80%N2 atmosphere. Phase and microstructure studies were performed using, respectively, the grazing incidence x-ray diffraction (GIXRD) system and the field emission - scanning electron microscopy (FE-SEM) system equipped with energy-dispersive spectroscopy (EDS) analyzer. The mechanical strength of the coating was evaluated by the roughness, nano-hardness, nano-scratch, and adhesion strength tests performed on coated and uncoated specimens. According to the results, the uncoated Al1050 specimen, the CPN-treated specimen, and the ASPN-treated specimen had a mean nano-hardness of 0.7 ± 0.1 GPa, 10.9 ± 0.6 GPa, and 9.6 ± 0.5 GPa, respectively. It was also found that the single-phase AlN coating has a better adhesion strength and scratch strength (LC3 = 12 N) than the composite AlN/Fe2-3N coating (LC3 = 10 N). Examination of scratch mechanisms in hard AlN and AlN + Fe2-3N coatings deposited on a soft aluminium substrate showed that the failures in these coatings are due to tensile-type Hertzian cracks. However, as the load increases, the substrate undergoes increasing deformation and failures shift to chipping and interfacial spallation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Microstructure and mechanical properties of multiphase coating produced by plasma nitriding Ti coated GB-5083 aluminum alloy10.1016/j.surfcoat.2014.05.055 ↗
2. Enhanced surface properties of aluminum by PVD-TiN coating combined with cathodic cage plasma nitriding10.1016/j.surfcoat.2017.08.015 ↗
3. Influence of pretreatment on surface behavior of duplex plasma treated AISI H13 tool steel10.1016/j.surfin.2017.06.009 ↗
4. Combining thermo-diffusing titanium and plasma nitriding to modify C61900 Cu-Al alloy10.1016/j.vacuum.2016.01.015 ↗
5. Kinetics and enhancement mechanism of plasma oxynitriding for AISI 1045 steel10.1016/j.surfcoat.2016.05.021 ↗
6. Microstructure and corrosion behaviour of pulsed plasma-nitrided AISI H13 tool steel10.1016/j.corsci.2010.05.036 ↗
7. Active screen plasma nitriding of Al using an iron cage: characterization and evaluation10.1016/j.vacuum.2015.09.018 ↗
8. Active screen plasma nitriding of 316 stainless steel for the application of bipolar plates in proton exchange membrane fuel cells10.1016/j.ijhydene.2014.04.102 ↗
9. Plasma nitriding of AISI 304 austenitic stainless steel assisted with hollow cathode effect
10. Effects of various nitriding parameters on active screen plasma nitriding behavior of a low-alloy steel10.1016/j.vacuum.2006.01.013 ↗
11. Simultaneous plasma nitriding and ageing treatments of precipitation hardenable plastic mould steel10.1016/j.matdes.2006.03.011 ↗
12. Scratch test of active screen low temperature plasma nitrided AISI 410 martensitic stainless steel10.1016/j.wear.2017.01.091 ↗
13. Microstructure and mechanical properties of MultilayerAlN/BCN coating as functions of the current density during sputtering of a B4C target physics of the solid state10.1134/S1063783418100220 ↗
14. An overview of the potential of quantitative coating adhesion measurement by scratch testing10.1016/j.triboint.2005.04.013 ↗
15. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
16. Nanomechanical and Tribological Behavior of Hydroxyapatite Reinforced Ultrahigh Molecular Weight Polyethylene10.1002/app.42052 ↗
17. Combined reactive/non-reactive DC magnetron sputtering of high temperature composite AlN – TiB 2 – TiSi 210.1016/j.matdes.2015.12.174 ↗
18. Nanocomposite Nb-Al-N coatings : experimental and theoretical principles of phase transformations10.1016/j.jallcom.2017.05.136 ↗
19. Effect of cathodic cage size on plasma nitriding of AISI 304 steel10.1016/j.matlet.2016.05.144 ↗
20. Effect of screen open area on active screen plasma nitriding of austenitic stainless steel10.2355/isijinternational.54.916 ↗
21. A study of active screen plasma nitriding10.1179/026708401225005250 ↗
22. Composite coatings created by new method of active screen plasma nitriding on aluminium alloy 606110.1016/j.jallcom.2017.12.360 ↗
23. The properties of AlN prepared by plasma nitriding and plasma source ion implantation techniques10.1016/S0257-8972(00)00807-0 ↗
24. Comparison of conventional and active screen plasma nitriding of hard chromium electroplated steel10.1016/j.vacuum.2009.02.005 ↗
25. On the fundamental mechanisms of active screen plasma nitriding10.1016/j.vacuum.2009.07.002 ↗
26. Distinctions of the growth and structural-spectroscopic investigations of thin AlN films grown on the GaAs substrates10.1016/j.physb.2016.04.044 ↗
27. Plasma-nitriding and characterization of FeAl40 iron aluminide10.1016/j.actamat.2014.11.044 ↗
28. Study on the active screen plasma nitriding and its nitriding mechanism10.1016/j.surfcoat.2006.03.045 ↗
29. Effect of active screen plasma nitriding pretreatment on wear behavior of TiN coating deposited by PACVD technique10.1016/j.apsusc.2012.04.041 ↗
30. Nitriding of stainless steel and aluminium alloys by plasma immersion ion implantation10.1016/S0257-8972(00)00638-1 ↗
31. A way to decrease the nitriding temperature of aluminium: the low-pressure arc-assisted nitriding process10.1016/S0257-8972(99)00209-1 ↗
32. Effect of component's geometry on the plasma nitriding behavior of AISI 4340 steel10.1016/j.matdes.2011.04.066 ↗
33. Effect of surface porosity on tribological properties of sintered pure Al and Al 6061
34. Scratch resistance analysis of plasma-nitrided Ti-6Al-4V alloy10.1016/j.wear.2013.01.070 ↗
35. Scratch hardness and mechanical property correlation for Mg/SiC and Mg/SiC/Ti metal-matrix composites10.1016/j.triboint.2005.04.017 ↗