Mechanical milling of Al and synthesis of in-situ Al2O3 particles by mechanical alloying of Al-CuO system
Source abstract
Abstract
Abstract Initially, pure Al was milled for upto 20 h in order to find out the milling characteristics of Al. The effect of milling on the crystallite size, lattice strain, lattice parameter and the melting characteristics of Al was determined. Later Al-5 vol. % CuO was milled to investigate the possibility of synthesis of in-situ Al2O3 by mechanical alloying (MA) and subsequent annealing of the milled powder. The DSC plot of the 25 h milled Al ponder shows an exothermic peak of crystallization instead of an endothermic peak due to melting. In-situ α-Al2O3 reinforcing particles have been successfully synthesized by annealing of the 25 h milled Al-5 vol. % CuO powder mixture. Al-5 vol. % CuO powder mixture was initially milled for 25 h and later annealed at 650 °C and 1100 °C for a period of 2 h. Various techniques like differential scanning calorimetry (DSC), differential thermogravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM) have been used to investigate the formation of phases during MA and subsequent annealing of the milled product. The formation of in-situ nanostructured α-Al2O3 particles was confirmed by annealing of the 25 h milled Al-5 vol. % CuO powder mixture at 650 °C and 1100 °C for 2 h. The exothermic reaction between Al and CuO represented as 2Al + 3CuO→ Al2O3 + 3Cu was induced by MA and was later completed during annealing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
2. Mechanically alloyed nanocomposites10.1016/j.pmatsci.2012.10.001 ↗
3. Nanostructured composite obtained by mechanically driven reduction reaction of CuO and Al powder mixture10.1016/S0925-8388(99)00643-X ↗
4. Heat flux analysis of a reacting thermite spray impingent on a substrate10.1021/ef201954d ↗
5. Nanoscale aluminum-metal oxide (thermite) reactions for application in energetic materials
6. Self-sustaining reactions induced by ball milling10.1016/S0079-6425(01)00002-0 ↗
7. Investigating the reaction path and growth kinetics in CuOx/AlCuOx/Al multilayer foils10.1063/1.1598297 ↗
8. Solid-state reaction of Al/CuO couple by high-energy ball milling10.1016/S0925-8388(97)00566-5 ↗
9. Mechanical induced reaction in Al-CuO system for in-situ fabrication of Al based nanocomposites10.1016/j.jallcom.2007.10.099 ↗
10. Displacement reactions during mechanical alloying10.1007/BF02646073 ↗
11. Use of the Voigt function in a single-line method for the analysis of X-ray diffraction line broadening10.1107/S0021889882012035 ↗
12. A rapid method for analysing the breadths of diffraction and spectral lines using the Voigt function10.1107/S0021889878012601 ↗
13. Cullity · 2001
14. Suryanarayana · 1998
15. Effect of mill type on morphology of AA6013 aluminium powder
16. Synthesis and characterisation of advanced ball-milled Al-Al2O3 nanocomposites for selective laser melting10.1016/j.powtec.2016.04.015 ↗
17. Effect of ball size on steady state of aluminum powder and efficiency of impacts during milling10.1016/j.powtec.2015.06.035 ↗
18. Fabrication of aluminum flake powder from foil scrap by a wet ball milling process10.1016/S0167-577X(01)00280-4 ↗
19. The thermal stability of high-energy ball-milled nanostructured Cu10.1016/j.matdes.2013.02.083 ↗
20. Surface characterization of metal nanoparticles10.1016/S0921-5093(03)00348-4 ↗
21. Chaira · 2017 · 12
22. Processing of advanced materials using high-energy mechanical milling10.1016/S0079-6425(03)00034-3 ↗
23. Melting behavior and origin of strain in ball-milled nanocrystalline Al powders10.1007/s10853-005-0664-1 ↗
24. Melting point depression and microstructure in ball-milled nanocrystalline aluminium powders
25. The microstructure and mechanical properties of an Al-CuO in-situ composite produced using friction stir processing10.1016/j.matlet.2012.09.028 ↗
26. Processing of advanced materials using high-energy mechanical milling10.1016/S0079-6425(03)00034-3 ↗
27. Processing of Cu-Al2O3 metal matrix nanocomposite materials by using high energy ball milling10.1016/S0921-5093(00)00627-4 ↗
28. Synthesis of Cu-Al2O3 metal matrix nanocomposite powder from Cuo and Al powders by using high energy planetary fast milling10.1142/S0219581X09006201 ↗
29. Synthesis of bulk nano-Al2O3 dispersed Cu-matrix composite using ball milled precursor10.1080/10426910701236056 ↗
30. Al-Al2O3 in situ particle composites by reaction of CuO particles in molten pure Al10.1016/S0167-577X(96)00188-7 ↗
31. Chauhan · 2014
32. Synthesis of copper alloys with extended solid solubility and nano Al2O3 dispersion by mechanical alloying and equal channel angular pressing10.1080/14786430903365286 ↗
33. Structural evolution during mechanical milling of nanometric and micrometric Al2O3 reinforced Al matrix composites10.1016/j.msea.2006.04.116 ↗
34. The structure and properties of aluminum alloys produced by mechanical alloying: powder processing and resultant powder structures10.1007/BF02648346 ↗
35. Study on the fabrication of Al matrix composites strengthened by combined in-situ alumina particle and in-situ alloying elements10.1016/S0921-5093(02)00025-4 ↗
36. The effect of sintering time on synthesis of in situ submicron a Al2O3 particles by the exothermic reactions of CuO particles in molten pure Al10.1016/j.jallcom.2012.10.018 ↗
37. Solid-state reaction of Al/CuO couple by high-energy ball milling10.1016/S0925-8388(97)00566-5 ↗
38. Exothermic reactions in Al-CuO nanocomposites10.1016/j.tca.2006.09.002 ↗
39. Processing of Cu-Al2O3 metal matrix nanocomposite materials by using high energy ball milling