Influence of water vapour on structural and thermal conductivity of post-heat treated plasma sprayed LZ and YSZ coatings
Source abstract
Abstract
Abstract In this work, the role of water vapour content during the post-heat treatment on the microstructure and thermal conductivity of atmospheric plasma sprayed lanthanum zirconate (LZ) and yttria stabilized zirconia (YSZ) coatings were studied. For this purpose free standing LZ and YSZ coatings with thickness about 300–400 μm were prepared and post-heat treated at 1100 °C for 50 h and 100 h with and without water vapour content. Phase stability and microstructure were investigated using X-ray diffraction and scanning electron microscope respectively. Thermal conductivity of as-sprayed and post-heat treated coatings were measured by laser-flash thermal diffusivity method and results obtained show that the thermal conductivity of post heat treated coatings increased significantly in both coatings. Further, the thermal conductivity of the coatings increased with increasing heat treatment time. Overall observations show that the presence of water vapour during the post-heat treatment has significantly influenced the microstructures as well as thermal conductivity in both coatings. Thermal conductivity of post-heat treated lanthanum zirconate and yttria stabilized zirconia coatings with presence of water vapour is 2.12 W m−1 K−1 and 2.48 W m−1 K−1 respectively which is 46% and 41% higher than as-sprayed coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Ceramic materials for thermal barrier coatings10.1016/S0955-2219(03)00129-8 ↗
2. Overview on advanced thermal barrier coatings10.1016/j.surfcoat.2010.08.151 ↗
3. Sintering studies of plasma-sprayed zirconia10.1016/0257-8972(87)90109-5 ↗
4. Influence of temperature on phase stability and thermal conductivity of single and double-ceramic-layer EB-PVD TBC top coats consisting of 7YSZ, Gd2Zr2O7 and La2Zr2O710.1016/j.surfcoat.2013.08.013 ↗
5. Double-Layer Gadolinium Zirconate/Yttria-Stabilized Zirconia thermal barrier coatings deposited by the solution precursor plasma spray process10.1007/s11666-015-0283-6 ↗
6. Plasma sprayed gadolinium zirconate thermal barrier coatings that are resistant to damage by molten Ca–Mg–Al–silicate glass10.1016/j.surfcoat.2012.03.051 ↗
7. Mechanical properties and oxidation behaviour of plasma sprayed functionally graded zirconia–alumina thermal barrier coatings10.1016/j.matchemphys.2007.02.066 ↗
8. Thermal stability of lanthanum zirconate plasma-sprayed coating10.1111/j.1151-2916.2001.tb00962.x ↗
9. Thermal barrier coating of lanthanum–zirconium–cerium composite oxide made by electron beam-physical vapor deposition10.1016/j.jallcom.2008.11.073 ↗
10. Preparation and thermo-physical properties of La2Zr2O7 coatings by thermal spraying of an amorphous precursor10.1007/s11666-011-9667-4 ↗
11. Preparation and thermo-physical properties of CeO2 doped La2Zr2O7 ceramic for thermal barrier coatings10.1016/j.jallcom.2006.08.005 ↗
12. Phase structure and thermo-physical properties of co-doped La2Zr2O7 ceramics for thermal barrier coatings10.1016/j.ceramint.2011.12.077 ↗
13. Influence of long time post annealing on thermal stability and thermo-physical properties of plasma sprayed La2Zr2O7coatings10.1016/j.jallcom.2016.10.328 ↗
14. Phase Stability of Ce-Modified La2Zr2O7 coatings and chemical compatibility with YSZ10.1007/s11666-016-0387-7 ↗
15. Degradation of Yttria-Stabilized Zirconia thermal barrier coatings by vanadium pentoxide, phosphorous pentoxide and sodium sulfate10.1111/j.1551-2916.2007.01941.x ↗
16. Initial phase hot corrosion mechanism of gas tunnel type plasma sprayed thermal barrier coatings10.1016/j.mseb.2011.12.037 ↗
17. Lifetime of plasma-sprayed thermal barrier coatings: comparison of numerical and experimental results10.1007/s11666-009-9389-z ↗
18. Design, preparation and characterization of graded YSZ/La2Zr2O7 thermal barrier coatings10.1111/j.1551-2916.2010.03610.x ↗
19. Hot corrosion behaviors of gas tunnel type plasma sprayed La2Zr2O7 thermal barrier coatings10.1016/j.jeurceramsoc.2011.10.049 ↗
20. Thermo-physical properties of lanthanum zirconate coating prepared by plasma spraying and the influence of post-annealing10.1016/j.jallcom.2009.06.162 ↗
21. Thermal conductivity, Phase stability and oxidation resistance of Y3Al5O12 (YAG)/Y2O3–ZrO2 (YSZ) thermal-barrier coatings10.1023/B:OXID.0000025334.02788.d3 ↗
22. Influence of heat treatment on nanocrystalline zirconia powder and plasma-sprayed thermal barrier coatings10.1016/S1003-6326(10)60640-1 ↗
23. Synthesis and characterization of lanthanum zirconate nanocrystals doped with iron ions by a salt-assistant combustion method10.1007/s10904-011-9499-1 ↗