journal article·2018-01

New insights of solid-state alloying and amorphous-nanocrystalline cyclic phase transitions during Cr-40wt.%Mo powder milling

Chongfeng Sun, Xianv Hai, Shengqi Xi, Zhijian Fan, Panpan Li, Wenbin Wang

Publisher page

Abstract

Abstract In this paper, the solid-state alloying of Cr-40wt.%Mo powder by high-energy milling and corresponding amorphous-nanocrystalline cyclic phase transitions were investigated. XRD, TEM and DSC analyses were utilized for phase, microstructure and thermodynamics stability characterization of the milled powders, respectively. The results demonstrate high-energy milling can induce severe lattice distortion and further amorphization of milled powder. Free volume/flow unit widely exists within the amorphous structure, greatly increasing the storage energy of milled powder and subsequently decreasing the thermodynamic barrier of atomic migration. For solid-state alloying of Cr-40wt.%Mo powder, there are two paths of atomic diffusion: diffusion reaction induced by crystal defects and diffusion reaction induced by free volume within the amorphous structure. Coexistence of Cr(Mo)0, Cr(Mo) and Mo(Cr)0 multi-phases is also found in this experiments. Furthermore, the cyclic phase transitions between amorphous alloy phase and nanocrystalline alloy phase are presented and discussed in details. It is concluded that the cyclic phase transitions mainly depend on the evolution of microstructure and storage energy, which are originally influenced by the reciprocating shear deformations during high energy milling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metallic Glasses and Amorphous Alloys · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Mechanical alloying
2. Investigation on the formation of Cu-Fe nano crystalline super-saturated solid solution developed by mechanical alloying10.1016/j.jallcom.2012.10.112 ↗
3. Mechanical alloying of Cu and Fe induced by severe plastic deformation of a Cu-Fe composite10.1016/j.actamat.2005.01.024 ↗
4. A study of densification and phase transformations of nanocomposite Cu-Fe prepared by mechanical alloying and consolidation process10.1007/s00170-016-8551-2 ↗
5. Two-phase coexistence region in mechanically alloyed Cu-Fe: an X-ray absorption near-edge structure study10.1016/S1359-6454(99)00111-1 ↗
6. Study on the solid solubility extension of Mo in Cu by mechanical alloying Cu with amorphous Cr(Mo)10.1016/j.actamat.2008.08.013 ↗
7. Thermodynamics analysis and characterisation of nanostructured Cu(Mo) compounds prepared by mechanical alloying and subsequent sintering10.1179/1743290111Y.0000000003 ↗
8. Nanocrystalline formation in immiscible Cu-Mo system subjected to mechanical alloying10.1166/jnn.2007.069 ↗
9. Structural study of nanocrystalline solid solution of Cu–Mo obtained by mechanical alloying10.1016/j.msea.2012.03.105 ↗
10. Formation of thermodynamics ally unstable solid solutions in the Cu-Co system by mechanical alloying10.1103/PhysRevB.48.13244 ↗
11. Three dimensional atom probing of supersaturated mechanically alloyed Cu-20at.%Co10.1016/S0921-5093(01)01875-5 ↗
12. Structural evolution and strain induced mixing in Cu-Co composites studied by transmission electron microscopy and atom probe tomography10.1016/j.matchar.2014.12.022 ↗
13. Dilatometric analysis on the sintering behavior of nanocrystalline W-Cu prepared by mechanical alloying10.1016/S0925-8388(01)01805-9 ↗
14. Synthesis and characterization of W-Cu nanocomposites developed by mechanical alloying10.1016/j.msea.2006.06.049 ↗
15. Microstructures and formation mechanism of W-Cu composite coatings on copper substrate prepared by mechanical alloying method10.1016/j.apsusc.2013.06.049 ↗
16. Fabrication of nanocrystalline alloys Cu-Cr-Mo super saturated solid solution by mechanical alloying10.1016/j.matchemphys.2014.03.060 ↗
17. Microstructures and mechanical properties of spark plasma sintered Cu-Cr composites prepared by mechanical milling and alloying10.1016/j.matdes.2015.08.127 ↗
18. Influence of Al 2 O 3, nanoparticles on solubility extension of Cr in Cu by mechanical alloying10.1016/j.actamat.2010.09.012 ↗
19. Structural investigation on nano-crystalline Cu-Cr supersaturated solid solution prepared by mechanical alloying10.1016/j.jallcom.2010.02.034 ↗
20. Cr-Mo solid solutions forced by high-energy ball milling
21. Thermodynamics characteristic and phase evolution in immiscible Cr-Mo binary alloys10.1007/s40195-015-0297-6 ↗
22. Synthesising amorphous Cr-Mo alloy via mechanical alloying of immiscible Cr and Mo elements10.1179/1432891715Z.0000000001493 ↗
23. Synthesis of Mg-Ti alloy by mechanical alloying10.1023/A:1022889100360 ↗
24. Mechanical alloying by ball milling of Ti and Mg elemental powders: operation condition considerations10.1016/j.jallcom.2009.11.184 ↗
25. Development of biodegradable Mg-Ti alloy synthesized using mechanical alloying10.4028/www.scientific.net/AMR.1133.75 ↗
26. Eleskandarany · 2001
27. Mechanically driven alloying of immiscible elements10.1103/PhysRevLett.68.2235 ↗
28. A thermodynamics approach to energy storage on mechanical alloying of the Cu-Cr system10.1016/j.scriptamat.2007.04.006 ↗
29. Mechanically induced cyclic metastable phase transformations of Zr2Ni alloys10.1103/PhysRevB.75.224109 ↗
30. Cyclic crystalline-amorphous transformations of mechanically alloyed Co[sub 75]Ti[sub 25]10.1063/1.118667 ↗
31. Amorphous-nanocrystalline-amorphous phase transformations in Se induced by mechanical attrition10.1080/095008398178480 ↗
32. Solid-state crystalline-glassy cyclic phase transformations of mechanically alloyed Cu33Zr67 powders10.1007/s11661-002-0012-x ↗
33. Amorphous-i phase-big cube-amorphous cyclic phase transformation of mechanically alloyed Zr75Ni20Al5 system10.1016/j.intermet.2015.01.010 ↗
34. Crystallite size distribution and dislocation structure determined by diffraction profile analysis: principles and practical application to cubic and hexagonal crystals10.1107/S0021889801003715 ↗
35. Correlation between strength and microstructure of ball-milled Al–Mg alloys determined by X-ray diffraction10.1016/j.msea.2004.01.089 ↗
36. Twinning on pyramidal planes in hexagonal close packed crystals determined along with other defects by X-ray line profile analysis10.1107/S0021889809022936 ↗
37. X-ray studies of deformed metals10.1016/0502-8205(59)90015-2 ↗
38. Wilkens · 1970 · vol. II · 1195
39. Hinds · 1982
40. The effect of dislocation contrast on x-ray line profiles in untextured polycrystals10.1002/(SICI)1521-396X(199902)171:2<425::AID-PSSA425>3.0.CO;2-W ↗
41. Comparative study of mechanical alloying induced nanocrystallization and amorphization in Ni-Nb and Ni-Zr systems10.1007/s11661-013-1717-8 ↗
42. Reversible grain size changes in ball–milled nanocrystalline Fe-Cu alloys10.1557/JMR.1992.1980 ↗
43. Milling and mechanical alloying of copper and some solution alloys seen as a thermomechanical process10.1016/0956-7151(94)90184-8 ↗
44. Deutsch. Springer Handbook of Condensed Matter and Materials Data–Springer[M], Springer Berlin Heidelberg.
45. Surface area effects on the early stages of the mechanical alloying of Ag50Cu50 powder mixtures10.1016/j.jallcom.2013.07.107 ↗
46. The effect of dislocation contrast on x–ray line broadening: a new approach to line profile analysis10.1063/1.117951 ↗
47. Guo · 2010
48. Isokinetic analysis of nanocrystalline nickel electrodeposits upon annealing10.1016/S1359-6454(96)00254-6 ↗
49. Thermal stability of nanostructured Al93Fe3 Cr2Ti2 alloys prepared via mechanical alloying10.1016/S1359-6454(03)00075-2 ↗
50. Crystallization and hardening of Zr-40 at.% Cu thin film metallic glass: effects of isothermal annealing10.1016/j.matdes.2015.07.149 ↗
51. Formation of amorphous metals by mechanical alloying10.1016/0025-5416(88)90004-3 ↗
52. The glass transition as a free volume related kinetic phenomenon10.1016/0956-7151(90)90142-4 ↗
53. Surface area effects on the early stages of the mechanical alloying of Ag50Cu50 powder mixtures10.1016/j.jallcom.2013.07.107 ↗
54. Signature of viscous flow units in apparent elastic regime of metallic glasses
55. The dependence of shear modulus on dynamic relaxation and evolution of local structural heterogeneity in a metallic glass10.1016/j.actamat.2013.04.004 ↗
56. Tensile plasticity in metallic glasses with pronounced β relaxations10.1103/PhysRevLett.108.015504 ↗
57. Wang, Evolution of structural and dynamic heterogeneities and activation energy distribution of deformation units in metallic glass10.1063/1.4795522 ↗
58. Structural perspectives on the elastic and mechanical properties of metallic glasses10.1063/1.4829028 ↗
59. Deformation–induced grain refinement and amorphization in Ti-10V-2Fe-3Al Alloy10.1007/s11661-011-0856-z ↗