Characterising precipitate evolution in multi-component cast aluminium alloys using small-angle X-ray scattering
Source abstract
Abstract
Aluminium alloys can be strengthened significantly by nano-scale precipitates that restrict dislocation movement. In this study, the evolution of inhomogenously distributed trialuminide precipitates in two multi component alloys was characterised by synchrotron small angle Xray scattering (SAXS). The appropriate selection of reference sample and data treatment required to successfully characterise a low volume fraction of precipitates in multi-component alloys via SAXS was investigated. The resulting SAXS study allowed the analysis of statistically significant numbers of precipitates (billions) as compared to electron microscopy (hundreds). Two cast aluminium alloys with different volume fractions of Al3ZrxV1-x precipitates were studied. Data analysis was conducted using direct evaluation methods on SAXS spectra and the results compared with those from transmission electron microscopy (TEM). Precipitates were found to attain a spherical structure with homogeneous chemical composition. Precipitate evolution was quantified, including size, size distribution, volume fraction and number density. The results provide evidence that these multi-component alloys have a short nucleation stage, with coarsening dominating precipitate size. The coarsening rate constant was calculated and compared to similar precipitate behaviour.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Recent development in aluminium alloys for the automotive industry10.1016/S0921-5093(99)00653-X ↗
2. The ambient and high temperature deformation behavior of Al–Si–Cu–Mg alloy with minor Ti, Zr, Ni additions10.1016/j.matdes.2014.01.041 ↗
3. Precipitation behaviour of Al3Zr precipitate in Al–Cu–Zr and Al–Cu–Zr–Ti–V alloys10.1016/S1003-6326(11)61398-8 ↗
4. Effect of Zr addition on the aging behavior of A319 aluminum cast alloy10.1016/j.scriptamat.2004.10.025 ↗
5. Precipitation evolution in Al-0.1Sc, Al-0.1Zr and Al-0.1Sc-0.1Zr (at.%) alloys during isochronal aging10.1016/j.actamat.2010.05.054 ↗
6. Coarsening behavior of L12 structured Al3(ZrxV1-x) precipitates in rapidly solidified Al-Zr-V alloy10.1016/0036-9748(87)90143-8 ↗
7. Lattice matching of DO23 and DO22 phases in Al-6at.% (Ti, V, Zr) systems10.1016/S0921-5093(96)10857-1 ↗
8. Microstructural evolution and mechanical properties of rapidly solidified Al-Zr-V alloys at high temperatures10.1016/0956-7151(90)90029-G ↗
9. Coarsening behavior of LI2 precipitates in melt-spun Al-Ti-V-Zr alloys10.1016/0921-5093(93)90581-X ↗
10. On the validity of simple precipitate size measurements by small-angle scattering in metallic systems10.1107/S0021889811003049 ↗
11. Precipitate characterisation in metallic systems by small-angle X-ray or neutron scattering10.1016/j.crhy.2011.12.008 ↗
12. Formation of (Fe,Cr) carbides and dislocation structures in low-chromium steel studied in situ using synchrotron radiation10.1107/S0021889812043531 ↗
13. Form-free size distributions from complementary stereological TEM/SAXS on precipitates in a Mg-Zn alloy10.1016/j.actamat.2013.11.029 ↗
14. Precipitation processes in a Mg–Zn–Sn alloy studied by TEM and SAXS10.1016/j.msea.2008.04.005 ↗
15. Small-angle X-ray scattering study of nanostructure evolution of β' precipitates in Al-Mg-Si alloy10.1016/j.scriptamat.2005.08.008 ↗
16. Precipitation kinetics and transformation of metastable phases in Al-Mg-Si alloys10.1016/j.actamat.2006.06.005 ↗
17. Early cluster formation during rapid cooling of an Al–Cu–Mg alloy: in situ small-angle X-ray scattering10.1016/j.scriptamat.2015.06.015 ↗
18. Quantitative investigation of precipitation and mechanical behaviour for AA2024 friction stir welds10.1016/j.actamat.2005.02.007 ↗
19. Microstructure mapping in friction stir welds of 7449 aluminium alloy using SAXS10.1016/j.actamat.2006.06.015 ↗
20. Precipitation kinetics in a severely plastically deformed 7075 aluminium alloy10.1016/j.actamat.2013.11.071 ↗
21. Influence of alloy composition and heat treatment on precipitate composition in Al–Zn–Mg–Cu alloys10.1016/j.actamat.2009.09.003 ↗
22. Evolution of precipitate microstructures during the retrogression and re-ageing heat treatment of an Al–Zn–Mg–Cu alloy10.1016/j.actamat.2010.05.017 ↗
23. Phase transformation and precipitation of an Al–Cu alloy during non-isothermal heating studied by in situ small-angle and wide-angle scattering10.1016/j.jallcom.2013.04.201 ↗
24. Characterization and modeling of precipitation kinetics in an Al – Zn – Mg alloy10.1016/S0921-5093(00)01247-8 ↗
25. Characterisation of the composition and volume fraction of η′ and η precipitates in an Al–Zn–Mg alloy by a combination of atom probe, small-angle X-ray scattering and transmission electron microscopy10.1016/j.actamat.2005.03.004 ↗
26. In situ evaluation of the microstructure evolution during rapid hardening of an Al–2.5Cu–1.5Mg (wt.%) alloy10.1016/j.actamat.2011.01.027 ↗
27. Resolution of structural transformation of intermediates in Al–Cu alloys during non-isothermal precipitation10.1557/jmr.2014.46 ↗
28. In situ small-angle scattering study of the precipitation kinetics in an Al–Zr–Sc alloy10.1016/j.actamat.2006.12.015 ↗
29. Complex precipitation pathways in multicomponent alloys10.1038/nmat1652 ↗
30. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
31. Glassy carbon as an absolute intensity calibration standard for small-angle scattering10.1007/s11661-009-9950-x ↗
32. Shape and internal structure of Guinier-Preston zones in Al-Ag10.1016/0956-7151(91)90204-E ↗
33. Effect of melt overheating on primary solidification in aluminium alloys
34. Quantitative characterization of precipitate microstructures in metallic alloys using small-angle scattering10.1007/s11661-012-1435-7 ↗
35. A new model for prediction of dispersoid precipitation in aluminium alloys containing zirconium and scandium10.1016/j.actamat.2003.11.023 ↗
36. Precipitation and Ostwald ripening in dilute AI base-Zr-V alloys10.1007/BF02645917 ↗
37. Alloy designing and characterization of rapidly solidified Al-Zr(-V) base alloys10.1016/S0261-3069(96)00037-4 ↗
38. Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during isothermal aging at 375–425°C10.1016/j.actamat.2007.09.004 ↗
39. Precipitation behaviors of cubic and tetragonal Zr–rich phase in Al–(Si–)Zr alloys10.1016/j.jallcom.2016.02.236 ↗
40. Role of silicon in accelerating the nucleation of Al3(Sc,Zr) precipitates in dilute Al–Sc–Zr alloys10.1016/j.actamat.2012.05.036 ↗
41. Effects of Fe and Si on the aging process of subperitectic Al-Zr alloys10.2464/jilm.25.247 ↗
42. Precipitation and dissolution of solute atoms in high purity and commercial Al-Zr alloys10.2320/matertrans1989.38.413 ↗