Effects of ball-milling on fabrication of YAG ceramics by a phase transformation assisted spark plasma sintering
Source abstract
Abstract
Abstract YAG ceramics were fabricated by spark plasma sintering assisted by the YAH-YAG phase transformation. These YAH powders were prepared by field-assisted rapid synthesis of the amorphous precursors using the planetary ball-milling. Moreover, the effects of ball-milling speed on the thermal behavior and morphology of the precursors and calcined YAH powders, as well as the subsequent sintering process were systematically studied. The results of thermal analysis of the YAH powders suggest that the exothermic peak for phase transformation shifts to the lower temperature and becomes sharper by increasing the ball-milling speed. The YAH powders synthesized from 225 rpm-milled precursors exhibit a relatively shallow and weak exothermic peak, indicating a slow phase transformation. Therefore, the samples sintered at 950 °C have the homogeneous microstructures from the center to edge. The in-line transmittances are 32% and 60% at 680 nm and 1000 nm, respectively. In the case of 250 rpm, however, the sharp and strong exothermic peak indicates a rapid phase transformation, resulting in an extremely rapid shrinkage between 890 °C and 900 °C during sintering. Microstructure evidence suggests that differential densification occurs during rapid phase transformation. The exterior of the sample is dense, while large pores trapped in the interior lead the sample to be opaque.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Luminescence Properties of Advanced Materials · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Fabrication of polycrystalline, transparent YAG ceramics by a solid-state reaction method10.1111/j.1151-2916.1995.tb08389.x ↗
2. High-pressure sintering mechanism of yttrium aluminum garnet (Y3Al5O12) transparent nanoceramics10.1016/j.scriptamat.2011.11.012 ↗
3. Preparation and properties of transparent Eu:YAG fluorescent ceramics with different doping concentrations10.1016/j.ceramint.2014.01.068 ↗
4. Solid-state reactive sintering of YAG transparent ceramics for optical applications10.1016/j.jallcom.2014.06.013 ↗
5. Solid-state reactive sintering of transparent polycrystalline Nd:YAG ceramics10.1111/j.1551-2916.2006.01051.x ↗
6. Synthesis of monodispersed spherical yttrium aluminum garnet (YAG) powders by a homogeneous precipitation method10.1111/jace.12046 ↗
7. Co-precipitation synthesis and vacuum sintering of Nd:YAG powders for transparent ceramics10.1016/j.materresbull.2015.04.063 ↗
8. Fabrication of YAG transparent ceramics using carbonate precipitated yttria powder10.1016/j.jeurceramsoc.2015.02.014 ↗
9. A comparative study of the synthesis of nanocrystalline YAG using sol-gel and co-precipitation methods10.1016/j.ceramint.2013.08.075 ↗
10. Agglomeration control of Nd:YAG nanoparticles via freeze drying for transparent Nd:YAG ceramics10.1111/j.1551-2916.2009.02987.x ↗
11. Preparation and photoluminescence properties of YAG: Ce3+ phosphors by a series of amines assisted co-precipitation method10.1016/j.jallcom.2015.11.106 ↗
12. Effect of ball-milling granulation with PVB adhesive on the sinterability of co-precipitated Yb:YAG nanopowders10.1016/j.jallcom.2013.12.022 ↗
13. Systematic optimization of spray drying for YAG transparent ceramics10.1016/j.jeurceramsoc.2015.02.004 ↗
14. Solid-state reactive sintering of Nd:YAG transparent ceramics: the effect of Y2O3 powders pretreatment10.1016/j.optmat.2014.04.038 ↗
15. Effects of ball milling time on microstructure evolution and optical transparency of Nd:YAG ceramics10.1016/j.ceramint.2014.02.076 ↗
16. Systematic optimization of ball milling for highly transparent Yb:YAG ceramic using co-precipitated raw powders10.1016/j.jallcom.2015.09.026 ↗
17. Functional properties of Nd:YAG polycrystalline ceramics processed by high-pressure spark plasma sintering (HPSPS)10.1111/jace.14051 ↗
18. Densification behavior of a fine-grained MgAl2O4 spinel during spark plasma sintering (SPS)10.1016/j.scriptamat.2010.06.012 ↗
19. Spark plasma sintering of alumina10.1111/j.1151-2916.2002.tb00381.x ↗
20. Transparent yttrium aluminum garnet (YAG) ceramics by spark plasma sintering10.1016/j.jeurceramsoc.2007.02.193 ↗
21. Phase evolution of YAG powders obtained by gel combustion combined with field-assisted rapid synthesis technique10.1016/j.ceramint.2015.02.009 ↗
22. Spark plasma sintering of transparent YAG ceramics assisted by the YAH-YAG phase transformation10.1016/j.jeurceramsoc.2016.02.038 ↗
23. A study on the effect factors of sol-gel synthesis of yttrium aluminum garnet nanopowders10.1063/1.3341012 ↗
24. Rapid rate sintering of nanocrystalline ZrO2-3 mol% Y2O310.1111/j.1151-2916.1996.tb08524.x ↗