Effects of thermomechanical treatments on the martensitic transformation and critical stress of Ti–50.2at.% Ni alloy
Source abstract
Abstract
Abstract In this research, the effects of cold work and annealing temperature on the martensitic transformation, mechanical properties, and the critical stress of a near equiatomic TiNi alloy were investigated. For this purpose, differential scanning calorimetry and tensile tests were used. A solution annealed strip with the chemical composition of Ti–50.2 at.% Ni was cold rolled to the reductions of 20% and 40% separately. They were subsequently annealed at a temperature range between 300 and 700 °C for 1 h. For the 40% cold rolled sample, the occurrence of A ↔ M transformation was inhibited due to the severe plastic deformation; therefore, differential scanning calorimetry of the sample was completely flat and no transformation peak was detected. Annealing at 400 °C made the temperature difference between the peaks of A → R and R → M transformations reach the maximum value, in comparison to other annealing temperatures. The influence of the annealing temperature on the mechanical properties of the alloy was also investigated. Features of the plateau region in the stress–strain curves of the specimens showed that the critical stress and the slope of plateau region decreased by increasing the annealing temperature. Then, they reached the constant values by annealing at above 500 °C. It was proposed that the mechanism of deformation in the plateau region of the annealed samples at temperatures lower than the recrystallization temperature is the reorientation of martensite and the elastic deformation of the reoriented martensite. Above the recrystallization temperature annealing, just a reorientation of martensite takes place.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Physical metallurgy of Ti–Ni-based shape memory alloys10.1016/j.pmatsci.2004.10.001 ↗
2. Non-medical applications of shape memory alloys10.1016/S0921-5093(99)00293-2 ↗
3. Crystal structure of the martensite in Ti–49.2at.% Ni alloy analyzed by the single crystal X-ray diffraction method10.1016/0001-6160(85)90128-2 ↗
4. Thermodynamic analysis of ageing-induced multiple-stage transformation behaviour of NiTi10.1080/14786430410001678262 ↗
5. Ageing-induced two-stage R-phase transformation in Ti–50.9at.% Ni10.1016/j.actamat.2003.09.032 ↗
6. Criteria of transformation sequences in NiTi shape memory alloys10.2320/matertrans1989.37.691 ↗
7. Transformation behavior in rolled NiTi10.1016/j.jallcom.2004.03.108 ↗
8. Influence of the recovery and recrystallization processes on the martensitic transformation of cold worked equiatomic Ti–Ni alloy10.1016/S0921-5093(03)00068-6 ↗
9. The effects of heat treatment on the recovery stresses of shape memory alloys10.1088/0964-1726/19/3/035021 ↗
10. Effect of annealing on transformation behavior and superelasticity of NiTi shape memory alloy10.1016/S1359-6462(01)01005-3 ↗
11. Two-stage martensitic transformation in a deformed and annealed NiTi alloy10.1016/1359-6462(96)00179-0 ↗
12. Two-stage R phase transformation in a cold-rolled and annealed Ti–50.6at.% Ni alloy10.1016/j.scriptamat.2004.12.010 ↗
13. Effect of early stages of precipitation and recovery on the multi-step transformation in deformed and annealed near-equiatomic NiTi alloy10.1016/S1359-6462(02)00475-X ↗
14. A study on the pseudoelasticity of low temperature aged and thermomechanically treated Ti–51.5at.% Ni shape memory alloy10.3139/146.111136 ↗
15. Asymmetry of stress–strain curves under tension and compression for NiTi shape memory alloys10.1016/S1359-6454(98)00112-8 ↗
16. A three-dimensional phenomenological model for martensite reorientation in shape memory alloys10.1016/j.jmps.2007.03.010 ↗
17. Tensile deformation of NiTi wires10.1002/jbm.a.30464 ↗
18. Effect of annealing on deformation-induced martensite stabilisation of NiTi10.1016/j.intermet.2007.09.003 ↗
19. Some aspects of the properties of NiTi shape memory alloy10.1016/S0925-8388(96)02572-8 ↗
20. Effect of cold work and annealing on the structure and characteristics of NiTi alloy10.1016/j.msea.2009.04.057 ↗
21. Effects of thermo-mechanical parameters on microstructure and mechanical properties of Ti–50at.% Ni shape memory alloy produced by VAR method10.1016/j.msea.2011.12.059 ↗
22. Optimum temperature for recovery and recrystallization of 52Ni48Ti shape memory alloy10.1016/j.matdes.2006.04.026 ↗
23. Investigation of the recovery and recrystallization processes of Ni50.9Ti49.1 shape memory wires using in situ electrical resistance measurement10.1016/j.msea.2012.04.106 ↗
24. Control of superelastic behavior of NiTi wires aided by thermomechanical treatment with reference to three-point bending10.1007/s11665-014-0901-3 ↗
25. Superelastic behavior of aged and thermomechanical treated NiTi alloy at Af+10°C10.1016/j.matdes.2010.06.022 ↗
26. Formation of the nanocrystalline structure in an equiatomic NiTi shape-memory alloy by thermomechanical processing10.1007/s11665-013-0856-9 ↗
27. The mechanical and thermal behaviors of heat-treated Ni-rich NiTi orthodontic archwires10.1007/s11665-009-9489-4 ↗
28. Effect of strain rate on properties of superelastic NiTi thin wires10.1016/j.msea.2007.09.006 ↗
29. Influence of Ni on martensitic phase transformations in NiTi shape memory alloys10.1016/j.actamat.2010.02.019 ↗
30. Origin of abnormal multi-stage martensitic transformation behavior in aged Ni-rich Ti–Ni shape memory alloys10.1016/j.actamat.2004.06.002 ↗
31. A study on the wire drawing of TiNi shape memory alloys10.1016/0921-5093(96)10369-5 ↗
32. The effects of cold rolling on the martensitic transformation of an equiatomic TiNi alloy10.1016/0956-7151(91)90177-3 ↗
33. Deformation mechanism and stabilization of martensite in TiNi shape memory alloy10.1016/S1005-0302(10)60151-X ↗
34. Study of the textural evolution in Ti-rich NiTi using synchrotron radiation10.1016/j.nimb.2005.12.029 ↗
35. Age-induced four-stage transformation in Ni-rich NiTi shape memory alloys10.1016/j.jallcom.2007.04.006 ↗
36. Three stage transformation behaviour in aged NiTi10.1016/0956-716X(93)90031-M ↗
37. Effect of ageing on martensitic transformation in NiTi shape memory alloy10.1007/BF01106847 ↗
38. Effect of ageing treatment on the transformation behaviour of Ti–50.9at.% Ni alloy10.1016/j.actamat.2007.10.020 ↗
39. Grain growth and precipitation in an annealed cold-rolled Ni50.2Ti49.8 alloy10.1016/j.intermet.2007.06.003 ↗
40. Optimisation of processing and properties of medical grade Nitinol wire10.3109/13645700009063057 ↗
41. The optimization of annealing and cold-drawing in the manufacture of the Ni–Ti shape memory alloy ultra-thin wire10.1007/s00170-010-3116-2 ↗