journal article·2014-12

Preparation of TaB/TaB 2 /mullite composites by combustion synthesis involving aluminothermic reduction of oxide precursors

C.L. Yeh, W.C. Kao

Publisher page

Abstract

Abstract TaB/TaB2/mullite composites were fabricated by self-sustaining combustion involving aluminothermic reduction of two oxide precursors, Ta2O5 and B2O3. Reactant mixtures were formulated by different combinations of Ta2O5–B2O3–Al–SiO2 with or without addition of boron. Exothermic reduction of Ta2O5 and B2O3 by Al provides sufficient heat to sustain the synthesis reaction in the SHS mode. The increase of SiO2 improved the mullite formation, but reduced the combustion temperature and velocity due to the dilution effect of SiO2 and the endothermic mullitization process. The phase of tantalum borides formed depended on the content of Al and the addition of boron. Specifically, the TaB/mullite composite with a small amount of TaB2 was produced from an Al-deficient sample of Ta2O5–2B2O3–6Al–2SiO2. For a boron-added sample of Ta2O5–2B2O3–6Al–2SiO2–3B, it was found that TaB2 prevailed and the resulting product was a TaB2/mullite composite. The SHS-derived mullite grains exhibit a thick whisker shape with a large aspect ratio.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Structure and properties of mullite – A review10.1016/j.jeurceramsoc.2007.03.017 ↗
2. Formation of aluminum rich 9:1 mullite and its transformation to low alumina mullite upon heating10.1016/0955-2219(95)00139-5 ↗
3. Mullite–zirconia–zircon composites: properties and thermal shock resistance10.1016/j.ceramint.2008.02.015 ↗
4. Fabrication and mechanical properties of SiC platelet reinforced mullite matrix composites10.1016/S0955-2219(98)00269-6 ↗
5. Fabrication and properties of SiC/mullite composite porous ceramics10.1016/j.ceramint.2013.07.013 ↗
6. Alumina–mullite ceramics for structural applications10.1016/j.ceramint.2005.04.001 ↗
7. In situ reacted TiB2-reinforced mullite10.1007/BF00356141 ↗
8. Microstructure development and phase evolution of alumina–mullite nanocomposite10.1016/j.ceramint.2013.10.071 ↗
9. Preparation of mullite fibers by sol–gel process and study of their morphology10.1080/10426914.2011.568570 ↗
10. Molten salt synthesis of mullite whiskers on the surface of SiC ceramics10.1016/j.jallcom.2013.07.203 ↗
11. Preparation of mullite by the reaction sintering of kaolinite and alumina10.1016/S0955-2219(00)00125-4 ↗
12. Sintering of mullite by different methods10.1080/10426914.2013.864400 ↗
13. Porous mullite-ZrO2 composites from reaction sintering of zircon and aluminum10.1016/j.ceramint.2004.12.001 ↗
14. Effects of in situ synthesized mullite whiskers on flextural strength and fracture toughness of corundum–mullite refractory materials10.1016/j.ceramint.2012.07.101 ↗
15. Synthesis of mullite by means of transferred and nontransferred arc plasma melting10.1080/10426910903536725 ↗
16. Dense mullite zirconia composites obtained from the reaction sintering of milled stoichiometric alumina zircon mixtures by SPS10.1016/j.ceramint.2013.08.119 ↗
17. A.G. Merzhanov, 40 Years of SHS: A Lucky Star of a Scientific Discovery, Bentham Science, 2012.10.2174/97816080512811120101 ↗
18. M. Lackner (Ed.), Combustion Synthesis: Novel Routes to Novel Materials, Bentham Science, 2010.
19. Combustion synthesis of refractory and hard materials: a review10.1016/j.ijrmhm.2012.09.002 ↗
20. Combustion synthesis of mullite–titanium boride composite10.1016/j.ceramint.2008.02.006 ↗
21. Novel route for combustion synthesis of zirconia–mullite/TiB2 composites10.1016/j.jallcom.2007.12.043 ↗
22. Elaboration of porous mullite-based materials via SHS reaction10.1016/j.ceramint.2009.07.025 ↗
23. High-gravity combustion synthesis of Al2TiO5/mullite ceramic composites10.1080/10426914.2012.746783 ↗
24. Synthesis, densification, and mechanical properties of TaB210.1016/j.matlet.2008.06.052 ↗
25. TaB2-based ceramics: microstructure, mechanical properties and oxidation resistance10.1016/j.jeurceramsoc.2011.07.032 ↗
26. UHTCs: ultra-high temperature ceramic materials for extreme environment applications10.1149/2.F04074IF ↗
27. Effects of excess boron on combustion synthesis of alumina–tantalum boride composites10.1016/j.ceramint.2013.10.082 ↗
28. Studies of Ta, Al and carbon sources on combustion synthesis of alumina–tantalum carbide composites
29. Effect of Cu content on the reaction behaviors of self-propagating high-temperature synthesis in Cu–Ti–B4C system10.1016/j.jallcom.2007.08.033 ↗
30. Binnewies · 2002
31. Combustion synthesis of Cr–Al and Cr–Si intermetallics with Al2O3 additions from Cr2O3–Al and Cr2O3–Al–Si reaction systems10.1016/j.intermet.2012.10.008 ↗
32. Three-dimensional spinning waves in the case of gas-free combustion10.1134/1.171725 ↗
33. Mullite whiskers derived from kaolin10.1016/j.ceramint.2008.01.017 ↗
34. Some fundamental versus practical aspects of self propagating high-temperature synthesis10.1016/S0167-2738(97)00388-3 ↗
35. Combustion synthesis of advanced materials: Part II. classification, applications and modelling10.1016/0079-6425(94)00012-3 ↗