Electrochemical properties of Sn-doped Li3V2(PO4)3 cathode material synthesized via a citric acid assisted sol–gel method
Source abstract
Abstract
Abstract A series of Sn-doped Li3V2−xSnx(PO4)3/C (x = 0, 0.1, 0.15, 0.2) samples were synthesized via a citric acid assisted sol–gel method. XRD patterns indicated that all the Li3V2−xSnx(PO4)3/C samples were pure single phase with a monoclinic structure (space group P21/n) and well crystallized. The structural refinement results and HRTEM analysis both indicated that Sn-doping did not alter the lattice structure of Li3V2(PO4)3, but increased the unit cell volume. SEM images revealed that Sn-doping has no obvious effects on the morphology and particle size of Li3V2(PO4)3. HRTEM, XRF and Raman results demonstrated that a thin carbon layer was coated on the surface of Li3V2−xSnx(PO4)3/C samples with a similar carbon content and good quality. The electrochemical performance was evaluated using coin-type half cells. Among the samples synthesized in this work, Li3V1.85Sn0.15(PO4)3/C exhibited the electrochemical performance in terms of specific capacity, rate capability, cycling performance. CV and EIS results implied that optimizing Sn-doping contents with x = 0.15 could greatly enhance the structural stability of Li3V2(PO4)3 during the charge–discharge processes, as well as increase electrical conductivity with a lower charge transfer resistance and a higher Li+ diffusion coefficient.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Li3V2(PO4)3 cathode materials for lithium-ion batteries: a review10.1016/j.jpowsour.2014.01.126 ↗
2. Synthesis, characterization, and electrochemical performance of Ce-doped ordered macroporous Li3V2(PO4)3/C cathode materials for lithium ion batteries10.1021/ie502917b ↗
3. Mesoporous Li3V2(PO4)3@CMK-3 nanocomposite cathode material for lithium ion batteries10.1016/j.jpowsour.2013.12.080 ↗
4. Microwave synthesis of Li3V2(PO4)3/C as positive-electrode materials for rechargeable lithium batteries10.1016/j.jallcom.2014.12.029 ↗
5. Enhanced electrochemical performance of Li3V2(PO4)3 microspheres assembled with nanoparticles embedded in a carbon matrix10.1039/C5RA01992C ↗
6. Hybrid nanoarchitecture of rutile TiO2 nanoneedle/graphene for advanced lithium-ion batteries10.1016/j.ssi.2014.11.017 ↗
7. Synthesis and electrochemical characterization of high rate capability Li3V2(PO4)3/C prepared by using poly(acrylic acid) and D-(+)-glucose as carbon sources10.1016/j.jpowsour.2014.11.055 ↗
8. Effect of process medium on the synthesis of carbon coated lithium vanadium phosphate composite using rheological phase reaction method10.1016/j.jpowsour.2014.10.089 ↗
9. Effect of MgO nanolayer coated on Li3V2(PO4)3/C cathode material for lithium-ion battery10.1016/j.jallcom.2010.04.181 ↗
10. significantly improved electrochemical performance in Li3V2(PO4)3/C promoted by SiO2 coating for lithium-ion batteries10.1021/jp301127r ↗
11. The electrochemical performance of Ni-added Li3V2(PO4)3/graphene composites as cathode material for Li-ion batteries10.1016/j.matlet.2015.01.087 ↗
12. Cathode properties of nanocrystalline Li3V1.8Al0.2(PO4)3/multi-walled carbon nanotube composites for hybrid capacitor prepared via ultra-centrifugation treatment10.5796/electrochemistry.83.249 ↗
13. Solvothermal synthesis of uniform Li3V2(PO4)3/C nanoparticles as cathode materials for lithium ion batteries10.1049/mnl.2014.0325 ↗
14. Nanostructured Li3V2(PO4)3/C composite as high-rate and long-life cathode material for lithium ion batteries10.1016/j.electacta.2014.07.139 ↗
15. Nanostructured Li3V2(PO4)3 cathode supported on reduced graphene oxide for lithium-ion batteries10.1016/j.jpowsour.2013.03.171 ↗
16. Li3V2(PO4)3@C core-shell nanocomposite as a superior cathode material for lithium-ion batteries10.1039/c3nr01617j ↗
17. Influences of the molecular structure of carbon sources on the structure, morphology and performances of the Li3V2(PO4)3-C cathode for Lithium ion batteries10.1039/C4NJ00718B ↗
18. Preparation and characteristic of spherical Li3V2(PO4)310.1016/j.jallcom.2009.06.146 ↗
19. Synthesis and electrochemical properties of Ti-doped Li3V2(PO4)3/C cathode materials
20. Synthesis and electrochemical properties of Zn-doped, carbon coated lithium vanadium phosphate cathode materials for lithium-ion batteries10.1016/j.jpowsour.2014.07.005 ↗
21. Synthesis and electrochemical properties of W-doped Li3V2(PO4)3/C cathode materials for lithium ion batteries10.1016/j.ceramint.2014.06.078 ↗
22. Preparation and electrochemical properties of Li3V1.8Mn0.2(PO4)3 doped via different Mn sources10.1016/j.jpowsour.2014.03.061 ↗
23. Synthesis of Li3NixV2−x(PO4)3/C cathode materials and their electrochemical performance for lithium ion batteries10.1007/s10008-013-2049-8 ↗
24. Synthesis and electrochemical properties of polyhedron-shaped Li3V2−xSnx(PO4)3 as cathode material for lithium-ion batteries10.1016/j.jelechem.2012.08.018 ↗
25. Effects of nickel-doped lithium vanadium phosphate on the performance of lithium-ion batteries10.1016/j.jallcom.2012.07.066 ↗
26. Synthesis and characterization of Ti-Mn and Ti-Fe codoped Li3V2(PO4)3 as cathode material for lithium ion batteries10.1016/j.jpowsour.2012.06.002 ↗
27. Mo-doped Li3V2(PO4)3/C cathode material with high rate capability and long term cyclic stability10.1016/j.electacta.2012.04.030 ↗
28. Synthesis and properties of Li3V2−xCex(PO4)3/C cathode materials for Li-ion batteries10.1016/j.jallcom.2012.04.014 ↗
29. Electrochemical performance of Li3V2−xMnx(PO4)3/C cathode materials prepared by a sol-gel method
30. Li3MxV2−x(PO4)3/C (M = Fe, Co) composite cathodes with extended solubility limit and improved electrochemical behavior10.1039/c2ra20998e ↗
31. Synthesis and electrochemical performance of Sn-doped Li3V2(PO4)3/C cathode material for lithium ion battery by microwave solid-state technique10.1016/j.jallcom.2012.07.077 ↗
32. Effects of Cr doping on the electrochemical performance of Li3V2(PO4)3 cathode material for lithium ion batteries10.1007/s10008-010-1255-x ↗
33. Synthesis and electrochemical properties of Nb-doped Li3V2(PO4)3/C cathode materials for lithium-ion batteries10.1016/j.mseb.2011.02.006 ↗
34. Synthesis and electrochemical performance of La-doped Li3V2−xLax(PO4)3 cathode materials for lithium batteries10.1007/s12598-011-0208-6 ↗
35. Effects of Ti and Mg Co doping on the electrochemical performance of Li3V2(PO4)3 cathode material for lithium ion batteries10.1021/jp201686g ↗
36. Aluminothermal synthesis and characterization of Li3V2−xAlx(PO4)3 cathode materials for lithium ion batteries10.1016/j.electacta.2010.12.063 ↗
37. Electrochemical performance of Al-substituted Li3V2(PO4)3 cathode materials synthesized by sol-gel method10.1016/S1003-6326(09)60188-6 ↗
38. Synthesis and electrochemical properties of Co-doped Li3V2(PO4)3 cathode materials for lithium-ion batteries10.1016/j.electacta.2009.10.028 ↗
39. Synthesis and characterization of Li3V(2−2x/3)Mgx(PO4)3/C cathode material for lithium-ion batteries10.1016/j.jpowsour.2010.02.009 ↗
40. Synthesis and performance of Li3(V1−xMgx)2(PO4)3 cathode materials10.1016/j.jpowsour.2010.02.081 ↗
41. Preparation and electrochemical properties of Y-doped Li3V2(PO4)3 cathode materials for lithium batteries10.1016/S1002-0721(08)60207-0 ↗
42. Preparation and electrochemical performance studies on Cr-doped Li3V2(PO4)3 as cathode materials for lithium-ion batteries10.1016/j.electacta.2009.05.041 ↗
43. The effect of Al substitution on the electrochemical insertion properties of the lithium vanadium phosphate, Li3V2(PO4)310.1149/1.2437072 ↗
44. Preparation and electrochemical studies of Fe-doped Li3V2(PO4) 3 cathode materials for lithium-ion batteries10.1016/j.jpowsour.2006.08.008 ↗
45. Mn influence on the electrochemical behaviour of Li3V2(PO4)3 cathode material10.1016/j.electacta.2010.12.011 ↗
46. Effect of Ni doping on electrochemical performance of Li3V2(PO4)3/C cathode material prepared by polyol process10.1016/j.ceramint.2014.03.172 ↗
47. Enhancement of discharge capacity of Li3V2(PO4)3 by stabilizing the orthorhombic phase at room temperature10.1016/S0167-2738(00)00292-7 ↗
48. Kinetic study on Li2.8(V0.9Ge0.1)2(PO4)3 by EIS measurement10.1016/j.jallcom.2006.11.131 ↗
49. Synthesis and characterization of Sn-doped LiMn2O4 cathode materials for rechargeable Li-ion batteries10.1149/1.2965635 ↗
50. Effects of Sn doping on the structural and electrochemical properties of LiNi0.8Co0.2O2 cathode materials10.1016/j.ssi.2006.11.017 ↗
51. Stannum doping of layered LiNi3/8Co2/8Mn3/8O2 cathode materials with high rate capability for Li-ion batteries10.1016/j.jpowsour.2005.08.026 ↗
52. Effects of tin doping on physicochemical and electrochemical performances of LiFe1−xSnxPO4/C (0 ≤ x ≤ 0.07) composite cathode materials10.1016/j.electacta.2011.05.091 ↗
53. The improvement of the high-rate charge/discharge performances of LiFePO4 cathode material by Sn doping10.1007/s10008-010-1263-x ↗
54. Revised effective ionic radii and systematic studies of inter atomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
55. Biotemplating of phosphate hierarchical rechargeable LiFePO4/C spirulina microstructures10.1039/c1jm10481k ↗
56. Synthesis and electrochemical performance characterization of Ce-doped Li3V2(PO4)3/C as cathode materials for lithium-ion batteries10.1016/j.jpowsour.2013.05.113 ↗