Electroless plating of low-resistivity Cu–Mn alloy thin films with self-forming capacity and enhanced thermal stability
Source abstract
Abstract
Abstract Previous studies have typically used sputter deposition to fabricate Cu–Mn alloy thin films with concentrated solute additions which have exceeded several atomic percentages, and the electrical resistivity values of the resultant films from previous studies are relatively high, ranging from 2.5 to 3.5 μΩ-cm. Herein, we proposed a different approach by using electroless process to plate dilute Cu–Mn (0.1 at.%) alloy thin films on dielectric layers (SiO2). Upon forming-gas annealing, the Mn incorporated into Cu–Mn films was segregated toward the SiO2 side, eventually converting itself into a few atomic layer thickness at the Cu/SiO2 interface, and forming films with a low level of resistivity the same as that of pure Cu films (2.0 μΩ-cm). The interfacial layer served as not only a diffusion barrier, but also an adhesion promoter that prevented the film’s agglomeration during annealing at elevated temperatures. The mechanism for the dual-function performance by the Mn addition was elucidated by interfacial bonding analysis, as well as dynamic (adhesive strength) and thermodynamic (surface-tension) measurements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Electrodeposition and Electroless Coatings · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. On the use of alloying elements for Cu interconnect applications10.1116/1.2357744 ↗
2. Advanced metallization concepts and impact on reliability10.7567/JJAP.53.05GA11 ↗
3. Phase identification of self-forming Cu–Mn based diffusion barriers on p-SiOCH and SiO2 dielectrics using X-ray absorption fine structure10.1063/1.3068500 ↗
4. Graded composition and valence states in self-forming barrier layers at Cu–Mn/SiO2 interface10.1063/1.3269602 ↗
5. A study on annealing mechanisms with different manganese contents in CuMn alloy10.1016/j.jallcom.2012.06.093 ↗
6. Self-forming barrier characteristics of Cu–V and Cu–Mn films for Cu interconnects10.1016/j.tsf.2013.04.052 ↗
7. Penetration of copper–manganese self-forming barrier into SiO2 pore-sealed SiCOH during deposition10.1149/2.021309jss ↗
8. Study of adhesion and chemical bonds in the reaction layer formed at Cu–Mn interconnection/SiO2 interface10.1063/1.4803500 ↗
9. Scanning transmission electron microscopy investigations of self-forming diffusion barrier formation in Cu(Mn) alloys on SiO210.1063/1.4822441 ↗
10. A study of Cu/CuMn barrier for 22-nm semiconductor manufacturing10.1109/TDMR.2013.2262525 ↗
11. Plasma-enhanced atomic layer deposition of Cu–Mn films with MnSixOy barrier layer10.1016/j.tsf.2012.02.015 ↗
12. Deposition of Cu–Mn alloy film from supercritical carbon dioxide for advanced interconnects10.1007/s10854-013-1422-9 ↗
13. Grain growth, agglomeration and interfacial reaction of copper interconnects10.1016/S0040-6090(02)00810-6 ↗
14. Comparison of the agglomeration behavior of thin metallic films on SiO210.1116/1.1861943 ↗
15. K. Musaka, B. Zheng, H. Wang, K. Wijkekoon, L. Chen, J. Lin, K. Watanabe, K. Ohira, T. Hosoda, K. Miyata, T. Hasegawa, G. Dixit, R. Chueng, M. Yamada, S. Kadomura, Thermal stress and reliability characterization of barriers for Cu interconnects, in: Interconnect Technology Conference, 6–6 June, 2001, pp. 83–85.10.1109/IITC.2001.930024 ↗
16. Copper alloy seed integration for reliability improvement10.1016/j.mee.2005.07.031 ↗
17. Evidence for “superfilling” of submicrometer trenches with electroless copper deposit10.1063/1.2712505 ↗
18. Superconformal filling of 41 nm trenches with Cu electroless deposition on Au-activated self-assembled monolayer10.1016/j.matchemphys.2010.04.029 ↗
19. Electrochemically deposited diffusion barriers10.1149/1.2055015 ↗
20. Integrated electroless metallization for ULSI10.1016/S0013-4686(99)00067-5 ↗
21. A new seeding and electroless approach to alloying, direct patterning, and self-forming barriers for Cu thin-film nanostructures10.1016/j.elecom.2010.08.012 ↗
22. Synergetic effect of vacuum-plasma and solution-colloidal seeding process for the fabrication of nanostructured barrier layers10.1016/j.elecom.2007.09.012 ↗
23. Characterization of ultrathin electroless barriers grown by self-aligned deposition on silicon-based dielectric films10.1149/1.1786072 ↗
24. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
25. Wettability of bare and fluorinated silanes a combined approach based on surface free energy evaluations and dipole moment calculations
26. Argon plasma-assisted PDMS-LTCC bonding technique for microsystem10.1088/0960-1317/20/11/115006 ↗
27. Failure mechanism of amorphous and crystalline Ta-N films in the Cu/Ta-N/Ta/SiO2 structure10.1149/1.1803836 ↗
28. Characteristics of reactively sputtered niobium nitride thinfilms as diffusion barriers for Cu metallization10.1007/s13391-012-2173-0 ↗
29. Strengthening TiN diffusion barriers for Cu metallization by lightly doping Al10.1063/1.2056583 ↗
30. Substrate considerations for grapheme synthesis on thin copper films10.1088/0957-4484/23/13/135601 ↗
31. Cullity · 2001 · 167
32. Self-forming diffusion barrier layer in Cu–Mn alloy metallization10.1063/1.1993759 ↗
33. Resistivity reduction by external oxidation of Cu–Mn alloy films for semiconductor interconnect application10.1116/1.3179167 ↗
34. Vapor deposition of highly conformal copper seed layers for plating through-silicon vias (TSVs)10.1149/2.097206jes ↗
35. Thermodynamic properties of copper manganese alloys
36. Thermodynamic study of the Cu–Mn system
37. Shunk · 1992 · 1435
38. Selective chemical vapor deposition of manganese self-aligned capping layer for Cu interconnections10.1149/1.3364799 ↗
39. Investigation of copper agglomeration at elevated temperatures10.1149/1.1627350 ↗
40. Kinetics of voiding and agglomeration of copper nanolayers on silica10.1103/PhysRevB.72.115425 ↗
41. Surface free energy and wettability of silyl layers on silicon determined from contact angle hysteresis10.1016/j.cis.2005.01.005 ↗
42. Static solvent contact angle measurements, surface free energy and wettability determination of various self-assembled monolayers on silicon dioxide10.1016/j.tsf.2006.04.006 ↗