journal article·2025-01

Effects of Al variations on the microstructure and mechanical properties of laser-cladding AlxNbMo0.5Ti1.5Ta0.5Cr0.5 refractory high-entropy alloy coatings

C.Y. Cui, H.H. Xu, J. Yang, X.G. Cui, J.Z. Lu

Publisher page

Abstract

Lightweight refractory high-entropy alloy coatings (RHEAcs) of Al XNbMo 0.5Ti 1.5Ta 0.5Cr 0.5 (where x = 0, 0.1, 0.2, and 0.3) were fabricated on 316L stainless steel surface by pre-placed powder laser cladding (LC) technology. The incorporation of Al element significantly enhanced the forming quality of coatings, resulting in nearly defect-free coatings with a thickness of 1.2–1.4 mm. Microstructural analysis revealed that the coatings were primarily composed of body-centered cubic (BCC) solid solution and C15-Laves phase. Due to the influence of a single brittle BCC phase, the Al-free coating exhibited high strength and brittleness, leading to numerous defects caused by thermal stress. The introduction of Al element refined the microstructure and facilitated the formation of Laves phases at grain boundaries, thereby alleviating stress to a certain extent. Consequently, the microhardness of the RHEAcs was significantly higher than that of the substrate, with the Al-free coating achieving the highest microhardness of 1250 HV, which was 5.89 times that of the substrate. Wear resistance results indicated that, prior to annealing, RHEAcs with varying Al content outperformed 316L stainless steel. Post-annealing, the coatings exhibited significantly lower friction coefficients compared with the annealed 316L substrate. The Al-free coating showed significant accumulation of abrasive particles, leading to severe abrasive and oxidative wear. Conversely, post-annealing oxidation induced the formation of dense and directional oxide accumulation, resulting in a notable improvement in wear resistance. Finally, the underlying strengthening mechanisms have been proposed and analyzed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Hosford · 2010
2. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties10.2514/1.18239 ↗
3. Microstructure evolution and mechanical properties of intermetallic Ni-xSi (x = 5,10,15,20) alloys10.1016/j.jallcom.2012.02.165 ↗
4. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
5. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
6. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
7. Refractory high-entropy alloys10.1016/j.intermet.2010.05.014 ↗
8. Microstructure and properties of a refractory NbCrMo0.5Ta0.5TiZr alloy10.1016/j.msea.2011.09.033 ↗
9. Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy10.1016/j.jallcom.2011.02.171 ↗
10. Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy10.1007/s10853-012-6260-2 ↗
11. Mechanical properties of low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system10.1016/j.msea.2012.12.018 ↗
12. Microstructure and properties of aluminum-containing refractory high-entropy alloys10.1007/s11837-014-1066-0 ↗
13. A review of refractory high-entropy alloys10.1016/S1003-6326(22)66035-7 ↗
14. Phase-transformation ductilization of brittle high-entropy alloys via metastability engineering10.1002/adma.201701678 ↗
15. Analysis of rheological behavior on transformation induced plasticity steel10.4028/www.scientific.net/MSF.850.120 ↗
16. Effects of Nb on deformation-induced transformation and mechanical properties of HfNbxTa0.2TiZr high entropy alloys10.1016/j.msea.2021.140798 ↗
17. Oxidation behavior of novel ultra-high temperature hafnium-zirconium carbonitrides: effect of nitrogen and metal ratios10.1016/j.ceramint.2023.10.291 ↗
18. Microstructure and properties of aluminum- containing refractory high-entropy alloys10.1007/s11837-014-1066-0 ↗
19. Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys10.1016/j.actamat.2014.01.029 ↗
20. Negative mixing enthalpy solid solutions deliver high strength and ductility10.1038/s41586-023-06894-9 ↗
21. Microstructure evolution and characteristics of laser cladding with pre-placed powder lightweight refractory NbxMo0.5Ti1.5Ta0.2Cr high-entropy alloy10.1016/j.intermet.2024.108229 ↗
22. Influence of Mo content and pressure on properties of CrZrNbTiMox refractory high-entropy alloy calculated by first principles
23. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the Main alloying element10.2320/matertrans.46.2817 ↗
24. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
25. Microstructures and mechanical properties of TixNbMoTaW refractory high-entropy alloys10.1016/j.msea.2017.12.004 ↗
26. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
27. Design and characterization of AlNbMoTaCux high entropy alloys laser cladding coatings10.1016/j.surfcoat.2022.128832 ↗
28. Order or disorder, Nat. Mater. 22 (2023) 925, 〈https://doi.org/10.1038/s41563-023-01636-8〉.10.1038/s41563-023-01636-8 ↗
29. The scattering of X-rays and Bragg’s law10.1073/pnas.10.2.57 ↗
30. Structural Applications of Intermetallic Compounds
31. Aluminum alloying effects on lattice types, microstructures, and mechanical behavior of high-entropy alloys systems10.1007/s11837-013-0776-z ↗
32. First-principles calculations of the structural and thermodynamic properties of bcc, fcc and hcp solid solutions in the Al–TM (TM = Ti, Zr and Hf) systems: a comparison of cluster expansion and supercell methods10.1016/j.actamat.2008.03.006 ↗
33. First-principles calculation of structural energetics of Al–TM (TM = Ti, Zr, Hf) intermetallics10.1016/j.actamat.2005.03.028 ↗
34. Corrosion behavior of TiMoNbX (X = Ta, Cr, Zr) refractory high entropy alloy coating prepared by laser cladding based on TC4 titanium alloy10.3390/ma16103860 ↗
35. ThermoCalc modelling of the effect of chemical composition on the phase transformations temperatures of Ti-0.4Al Alloy10.1088/1757-899X/969/1/012029 ↗
36. Analysis of the elevated temperature deformation mechanisms and grain boundary strengthening of the alumina-forming austenitic stainless steel Fe–20Cr–30Ni–2Nb–5Al10.1016/j.msea.2021.141219 ↗
37. Enhancement of high temperature low cycle fatigue lifetime of PWA1484 superalloy artificial bicrystals via boron-induced grain boundary strengthening10.1016/j.ijfatigue.2022.107223 ↗
38. Micromechanics of void nucleation and early growth at incoherent precipitates: lattice-trapped and dislocation-mediated delamination modes10.3390/cryst11010045 ↗
39. Hall-Petch equation in a hypoeutectic Al-Si cast alloy: grain size vs. secondary dendrite arm spacing10.1016/j.proeng.2017.10.731 ↗
40. Insight into the high-temperature tribological mechanism of VAlTiCrW high entropy alloy film: AlV3O9 from tribochemistry10.1007/s40544-022-0640-7 ↗
41. Tribological properties of self-lubricating Ta-Cu films10.1016/j.apsusc.2017.11.220 ↗
42. Nanomechanical properties of pure and doped Ta2O5 and the effect of microwave irradiation10.1088/0022-3727/45/47/475304 ↗
43. Effect of Ta2O5 addition on the microstructure and mechanical properties of TiO2-added yttria-stabilized zirconia-toughened alumina (ZTA) composites10.1016/j.ceramint.2018.05.112 ↗
44. Effect of Ta2O5 addition on thermophysical and mechanical properties of (Sm0.5Gd0.3Yb0.2)2Ce2O7 compounds10.1016/j.ceramint.2019.07.120 ↗
45. Corrosion and wear properties of h-BN-modified TC4 titanium alloy micro-arc oxide coatings10.1680/jsuin.21.00070 ↗
46. Microstructural, thermomechanical and tribological behavior of refractory high-entropy AlxCr0.25Nb0.5Ta0.5Ti1.5 (x = 0.5, 1) alloys
47. Alloying effect on the oxidation behavior of a ductile Al0.5Cr0.25Nb0.5Ta0.5Ti1.5 refractory high-entropy alloy