Synergistic effect of Al2O3 and MoS2 on the corrosion behaviour of plasma sprayed aluminium matrix composite coating
Source abstract
Abstract
In this study, the incorporation of alumina (Al 2O 3 ) and molybdenum disulfide (MoS 2 ) in Aluminium (Al) was successfully fabricated through shroud plasma spray. This strategic incorporation of MoS 2 and Al 2O 3 effectively fills voids, leading to a remarkable reduction in inherent porosity within the aluminium coating, achieving an impressive ∼76.54 % reduction. These composite coatings exhibited outstanding hydrophobicity (contact angle ∼119°), signifying remarkable water repellency and anti-corrosion properties compared to bare aluminium (contact angle ∼81.7°). During the electrochemical corrosion test, the corrosion rates (CR) of Al coating (CR = 9.14 mpy) was notably around 23 times higher compared to MoS 2 and Al 2O 3 reinforced aluminium composite coating (CR = 0.372 mpy) in a 3.5 wt % NaCl electrolyte. The subsequent post-corrosion analysis further confirmed the composite coating`s efficiency in mitigating the impact of corrosive salts, underlining the effectiveness of the hybrid coating in combating corrosion attacks. A corrosion behaviour prediction model was established based on computational and experimental data.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Study of corrosion behaviour of Al2024 nanocomposite reinforced with MWCNTs10.1016/j.matpr.2022.04.482 ↗
2. Sputter-grown hierarchical nitride (TiN & h-BN) coatings on BN nanoplates reinforced Al7079 alloy with improved corrosion resistance10.1016/j.surfcoat.2021.128061 ↗
3. Mechanical and dry sliding tribological characteristics of aluminium matrix composite reinforced with high entropy alloy particles10.1016/j.triboint.2023.109055 ↗
4. Influence of reinforcement proportion and matrix composition on pitting corrosion behaviour of cast aluminium matrix composites (A3xx.x/SiCp)10.1016/j.corsci.2004.08.010 ↗
5. Preparation and characterization of novel TiB2-12(Fe-Co-Cr-Ni) cermets and their corrosion resistance in molten aluminum10.1016/j.corsci.2021.109643 ↗
6. Electrochemical and DFT studies of laser-alloyed TiB2/TiC/Al coatings on aluminium alloy10.1016/j.corsci.2018.02.028 ↗
7. Electrochemical corrosion behavior of 6061 Al alloy under high rotating speed submerged friction stir processing10.1016/j.corsci.2023.111029 ↗
8. Microstructure inhomogeneity of the constituent particles of 7075-T6 aluminum alloy after alkaline cleaning and desmutting10.1016/j.corsci.2021.109354 ↗
9. Studies on micro structural characteristics, mechanical and tribological behaviours of boron carbide and cow dung ash reinforced aluminium (Al 7075) hybrid metal matrix composite10.1016/j.compositesb.2019.107668 ↗
10. Effect of processing speed on wear and corrosion behavior of novel MoS2 and CeO2 reinforced hybrid aluminum matrix composites fabricated by friction stir processing10.1016/j.jmapro.2021.07.032 ↗
11. Degradation mechanism of 6063 aluminium matrix composite reinforced with TiC and Al2O3 particles10.1016/j.jallcom.2020.157838 ↗
12. Salt spray corrosion and electrochemical corrosion properties of anodic oxide film on 7475 aluminum alloy10.1016/j.jallcom.2015.01.175 ↗
13. Microstructure, wear and corrosion characteristics of multiple-reinforced (SiC–B4C–Al2O3) Al matrix composites produced by liquid metal infiltration10.1016/j.ceramint.2021.03.147 ↗
14. Microstructure and corrosion behavior of Al-TiB2/TiC composites processed by hot rolling10.1016/j.rinp.2019.102471 ↗
15. Graphene and Graphene/Polymer composites as the most efficient protective coatings for steel, aluminum and copper in corrosive media: a review of recent studies10.1002/tcr.201900021 ↗
16. Large-scale fabrication of superhydrophobic polyurethane/nano-Al2O3 coatings by suspension flame spraying for anti-corrosion applications10.1016/j.apsusc.2014.05.186 ↗
17. Coatings on reinforcements in aluminum metal matrix composites
18. A review of recent developments in the corrosion performance of aluminium matrix composites10.1016/j.jallcom.2023.169508 ↗
19. Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics10.1016/j.jmrt.2015.05.003 ↗
20. Polyester based-siloxane modified waterborne anticorrosive hydrophobic coating on copper10.1016/j.surfcoat.2012.09.028 ↗
21. Corrosion resistance of MoS2-modified titanium alloy micro-arc oxidation coating10.1016/j.surfcoat.2022.128127 ↗
22. Corrosion performance of Al–Al2O3 cold sprayed coatings on mild carbon steel pipe under thermal insulation10.1016/j.cjche.2016.10.004 ↗
23. Effect of Al2O3 and MoS2 reinforcement on microstructure, mechanical, and wear properties of plasma sprayed aluminium hybrid composite coating
24. Wettability of bare and fluorinated silanes: a combined approach based on surface free energy evaluations and dipole moment calculations10.1016/j.jcis.2012.09.008 ↗
25. Role of Cl− and NO3- ions on the corrosion behavior of 20 % SiCp reinforced 6061-Al metal matrix composite: a correlation between electrochemical studies and atomic force microscopy10.1016/j.corsci.2008.06.027 ↗
26. Plasma sprayed graphene reinforced titanium nitride composite coating: an effective solution for mitigating the corrosion attack10.1016/j.surfcoat.2022.128704 ↗
27. Nano-Al doped-MoO3 high-energy composite films with excellent hydrophobicity and thermal stability10.1016/j.ceramint.2021.05.113 ↗
28. Electrophoresis assembly of novel superhydrophobic Molybdenum trioxide (MoO3) films with great stability10.3390/ma12030336 ↗
29. Water (Non-)interaction with MoO310.1021/acs.jpcc.9b03822 ↗
30. Corrosion characteristics of cold gas spray coatings of reinforced aluminum deposited onto carbon steel10.1016/j.corsci.2016.10.019 ↗
31. Improved corrosion resistance of acrylic coatings prepared with modified MoS2 nanosheets10.1016/j.colsurfa.2019.124318 ↗
32. Corrosion behaviour of Ni/WC-MoS2 composite coatings prepared by jet electrodeposition with different MoS2 doping concentrations10.1016/j.apsusc.2022.155905 ↗
33. Sacrificial thermally sprayed aluminium coatings for marine environments: a review10.3390/coatings10030267 ↗
34. Al/Al2O3 composite coating deposited by flame spraying for marine applications: alumina skeleton enhances anti-corrosion and wear performances10.1007/s11666-014-0056-7 ↗
35. Corrosion behavior of electron beam processed AZ91 magnesium alloy10.1016/j.jma.2020.08.012 ↗
36. Electrochemical corrosion properties of CeO2-containing coatings on AZ31 magnesium alloys prepared by plasma electrolytic oxidation10.1016/j.corsci.2012.04.043 ↗
37. Enhancing corrosion resistance of Al 5050 alloy based on surface roughness and its fabrication methods; an experimental investigation10.1016/j.jmrt.2021.01.096 ↗
38. An experimental study: Role of different ambient on sulfurization of MoO3 into MoS210.1016/j.jallcom.2016.02.097 ↗
39. Construction of MoO3/MoSe2 nanocomposite-based gas sensor for low detection limit trimethylamine sensing at room temperature10.1007/s10854-021-06242-5 ↗
40. An experimental study: role of different ambient on sulfurization of MoO3 into MoS210.1016/j.jallcom.2016.02.097 ↗
41. Effect of coating Al2O3 reinforcing particles on the interface and mechanical properties of 6061 alloy aluminium matrix composites10.1016/j.matlet.2004.06.080 ↗
42. The reactive element effect of ceria particle dispersion on alumina growth: a model based on microstructural observations
43. Correlation between pitting susceptibility and surface acidity, point of zero charge of passive film on aluminum: influence of alloying elements10.1016/j.corsci.2023.111726 ↗
44. Does expanding or contracting MgO lattice really help with corrosion resistance of Mg surface: insights from molecular dynamics simulations10.1021/acsomega.0c03755 ↗
45. The mechanism for the enhanced mechanical and piezoelectricity properties of La2O3 doped BaTiO3 ceramic coatings prepared by plasma spray10.1016/j.jallcom.2021.162944 ↗