journal article·2024-07

Electrical and thermal properties of bio-inspired laminated Cu/Ti3SiC2/C composites reinforced by graphene nanoplatelets

Mu Wang, Xiaosong Jiang, Hongliang Sun, Zixuan Wu, Liu Yang

Publisher page

Abstract

Taking inspiration from the unique hierarchical structure of bio-materials like pearl oyster, this study employs bio-inspired composites technological route using flake powder metallurgy to prepare laminated Cu/Ti 3SiC 2 /C composites. The prepared composites have clear laminated structure, uniform dispersion of reinforcing phase and clean interface. At a Cu-plated GNPs content of 0.5 wt%, the composites displayed tensile strength of 300.65 MPa, compressive strength of 575.32 MPa, electrical conductivity of 26.31 MS/m, and thermal conductivity of 285.87 W·m −1·K −1. The reinforcement of composites is caused by the load transfer effect of the laminated structure. During the loading process, the laminated structure creates multiple paths for deflecting cracks, which leads to the redistribution of the applied load. Moreover, the homogeneous distribution of GNPs throughout the laminated structure extends the mean free path of both free electrons and phonons within the material, consequently bolstering the electrical and thermal conductivity of the composites.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Microstructures and mechanical properties of Cu/Ti3SiC2/C/graphene nanocomposites prepared by vacuum hot-pressing sintering and hot isostatic pressing10.1016/j.compositesb.2017.12.050 ↗
2. Effect of La on microstructures and mechanical properties of Cu/Ti3SiC2/C nanocomposites sintered by vacuum hot-pressing and hot isostatic pressing10.1088/2053-1591/ab5df6 ↗
3. Synergetic effect of nano-carbon and HBN on microstructure and mechanical properties of Cu/Ti3SiC2/C nanocomposites10.1016/j.msea.2019.04.002 ↗
4. Microstructures and properties of graphene nanoplatelets reinforced Cu/Ti3SiC2/C nanocomposites with efficient dispersion and strengthening achieved by high-pressure torsion10.1016/j.matchar.2022.112308 ↗
5. Structural biological materials: critical mechanics-materials connections10.1126/science.1220854 ↗
6. Bioinspired structural materials10.1038/nmat4089 ↗
7. Design and high efficient construction of bilayer NiCoO2/Poly(1-NA-co-oT) nanocomposite absorber for X-band stealth applications10.1016/j.vacuum.2023.112792 ↗
8. Deformation behavior of brittle/ductile multilayered composites under interface constraint effect10.1016/j.ijplas.2016.11.005 ↗
9. Artificial carbonate nanocrystals and layered structural nanocomposites inspired by nacre: synthesis, fabrication and applications
10. The origin of high thermal conductivity and ultralow thermal expansion in copper–graphite composites10.1021/acs.nanolett.5b01664 ↗
11. Microstructure and mechanical properties of bioinspired laminated Al matrix hybrid reinforced with B4C and graphene nanoplatelets10.1016/j.matchar.2022.112307 ↗
12. Microstructure, mechanical and tribological properties of Cu-Sn/Cr3C2/Gr composites10.1016/j.compstruct.2023.117575 ↗
13. The effect of copper granules on interfacial bonding and properties of the copper-graphite composite prepared by flake powder metallurgy10.1016/j.apt.2019.09.013 ↗
14. Utilizing a unified conceptual dynamic model for prediction of particle size of duel-matrix nanocomposites during mechanical alloying10.1016/j.powtec.2023.118291 ↗
15. Synergistic outstanding strengthening behavior of graphene/copper nanocomposites10.1016/j.compositesb.2019.107235 ↗
16. Reinforcing interlaminar interface of carbon fiber reinforced metal laminates by graphene10.1016/j.compstruct.2023.116814 ↗
17. The microstructures and properties of graphite flake/copper composites with high volume fractions of graphite flake10.1016/S1872-5805(20)60475-9 ↗
18. Superior thermal conductivity of single-layer graphene10.1021/nl0731872 ↗
19. Predicting crystallite size of Mg-Ti-SiC nanocomposites using an adaptive neuro-fuzzy inference system model modified by termite life cycle optimizer10.1016/j.aej.2023.11.009 ↗
20. Thermophysical properties and microstructure of graphite flake/copper composites processed by electroless copper coating
21. Fabrication and evaluation of tribological properties of Al2O3 coated Ag reinforced copper matrix nanocomposite by mechanical alloying10.1080/21870764.2020.1841073 ↗
22. Enhanced interfacial bonding and mechanical properties in CNT/Al composites fabricated by flake powder metallurgy10.1016/j.carbon.2018.01.037 ↗
23. Microstructural, mechanical and wear behavior of electroless assisted silver coated Al2O3–Cu nanocomposites10.1016/j.matchemphys.2021.124562 ↗
24. Effect of composition on friction coefficient of Cu–graphite composites10.1016/j.wear.2007.11.012 ↗
25. High thermal and electrical properties of electroless graphene films reinforced Cu matrix laminated composites10.1016/j.jallcom.2022.166710 ↗
26. Fabrication of Cu/graphite film/Cu sandwich composites with ultrahigh thermal conductivity for thermal management applications10.1007/s11706-020-0503-y ↗
27. Largely enhanced thermal conductivity of graphene/copper composites with highly aligned graphene network10.1016/j.carbon.2017.10.099 ↗
28. The effect of Cu coated Al2O3 particle content and densification methods on the microstructure and mechanical properties of Al matrix composites10.1016/j.jmrt.2023.05.010 ↗
29. Effect of lattice structure evolution on the thermal and mechanical properties of Cu–Al2O3/GNPs nanocomposites10.1016/j.ceramint.2021.02.219 ↗
30. Structural, mechanical and tribological properties of Cu–ZrO2/GNPs hybrid nanocomposites10.1016/j.ceramint.2019.11.258 ↗
31. Effect of GNPs coated Ag on microstructure and mechanical properties of Cu-Fe dual-matrix nanocomposite10.1016/j.jallcom.2018.12.042 ↗
32. Composites reinforced in three dimensions by using low magnetic fields10.1126/science.1210822 ↗
33. Effect of molybdenum as interfacial element on the thermal conductivity of diamond/Cu composites10.1016/j.jallcom.2012.03.045 ↗
34. Cu/Ti3SiC2 composite: a new electrofriction material10.1007/s100190050129 ↗
35. Reaction synthesis of Ti3SiC2 phase in plasma sprayed coating10.1016/j.jallcom.2009.04.079 ↗
36. Self-lubricating behavior caused by tribo-oxidation of Ti3SiC2/Cu composites in a wide temperature range10.1016/j.ceramint.2022.02.084 ↗
37. Fabrication and mechanical properties of MWCNTs and graphene synergetically reinforced Cu–graphite matrix composites10.1016/j.powtec.2019.03.021 ↗
38. Influence of Cu on the mechanical and tribological properties of Ti3SiC210.1016/j.ceramint.2016.03.099 ↗
39. Synergistic strengthening and toughening of copper coated graphene nanoplates and in situ nanoparticles reinforced AA6111 composites10.1016/j.msea.2021.141661 ↗
40. Bio-inspired composite laminate design with improved out-of-plane strength and ductility10.1016/j.compositesa.2021.106362 ↗
41. Fabrication and mechanical properties of nano‑carbon reinforced laminated Cu matrix composites10.1016/j.powtec.2021.09.072 ↗
42. Comprehensive investigation of the impact of milling time on microstructural evolution and tribological properties in Mg-Ti-SiC hybrid composites
43. Microstructure and mechanical characterization of Cu–Ni/Al2O3 nanocomposites fabricated using a novel in situ reactive synthesis10.1016/j.ceramint.2021.11.185 ↗
44. Prediction of tribological properties of alumina-coated, silver-reinforced copper nanocomposites using long short-term model combined with golden jackal optimization10.3390/lubricants10110277 ↗
45. Aligning graphene in bulk copper: nacre-inspired nanolaminated architecture coupled with in-situ processing for enhanced mechanical properties and high electrical conductivity10.1016/j.carbon.2017.02.089 ↗
46. Microstructure, electrical conductivity and hardness of multilayer graphene/copper nanocomposites synthesized by flake powder metallurgy10.1007/s12540-015-5058-6 ↗
47. Enhanced thermal conductivity in diamond/aluminum composites with a tungsten interface nanolayer10.1016/j.matdes.2012.11.061 ↗
48. Enhanced thermal conductivity in copper matrix composites reinforced with titanium-coated diamond particles10.1016/j.scriptamat.2011.09.028 ↗
49. Thermal boundary resistance10.1103/RevModPhys.61.605 ↗
50. Anisotropy of thermal conductivity and mechanical properties in Mg–5Zn–1Mn alloy10.1016/j.matdes.2012.03.046 ↗
51. Preparation of graphite flakes/Al with preferred orientation and high thermal conductivity by squeeze casting10.1016/j.carbon.2015.08.063 ↗
52. Shock response of Cu/graphene nanolayered composites10.1016/j.carbon.2016.03.039 ↗