journal article·2024-06

Effects of intermediate ZrC-TaC layer on ablation resistance and mechanism of (Zr, Hf)C solid solution coating at 2700 °C

Yuanming Zuo, Ruitao Zhang, Xin Yang, Zhongguo Liu, Xiao Luo, Xiaxiang Zhang, Qizhong Huang

Publisher page

Abstract

An intermediate ZrC-TaC layer was incorporated into the (Hf, Zr)C/SiC coating to enhance its ablation resistance at high temperatures. The impact of this intermediate layer on the ablation resistance and mechanism of the (Zr, Hf)C solid solution coating was analyzed at a temperature of 2700 °C. Due to the formation of gradient multi-layer structure of the (Hf, Zr)C/ZrC-TaC/SiC coating, (Hf, Zr)C/ZrC-TaC/SiC triple-layer coating exhibits superior ablative property than (Hf, Zr)C/SiC double-layer coating. After 20 s ablation at about 2700 °C, the linear and mass ablation rates of double and triple-layer coatings were 0.0030 mm/s, 0.0108 g/s, and −0.0030 mm/s, 0.0074 g/s, respectively. The enhanced ablative property was attributed to the positive role of the prepared ZrC-TaC middle layer, which not only relieves the CTE mismatch between the layers, but also stimulates the formation of continuous (Hf, Zr)O 2 protective outer layer and reduction of surface temperature during ablation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Ablative Property and Mechanism of ZrC-TaC/ZrC-SiC Coatings on C/C Compositesunder Different Heat Fluxes10.1007/s11666-021-01215-w ↗
2. Modelling of carbon–carbon composite ablation in rocket nozzles10.1016/j.compscitech.2010.04.002 ↗
3. A ZrC SiC/SiC multilayer anti-ablation coating for ZrC modified C/C composites10.1016/j.vacuum.2018.09.003 ↗
4. Ultra-high-temperature ceramic coatings for oxidation protection of carbon–carbon composites10.1111/j.1551-2916.2008.02331.x ↗
5. Long-term oxidation behaviors of C/SiC composites with a SiC/UHTC/SiC three-layer coating in a wide temperature range10.1016/j.corsci.2018.10.017 ↗
6. Ablation resistance and mechanism of SiC/ZrC-ZrB2 double layer coating for C/C composites under plasma flame10.1007/s11771-020-4479-7 ↗
7. Effect of ZrC–SiC content on microstructure and ablation properties of C/C composites10.1016/S1003-6326(16)64392-3 ↗
8. Resistance to oxidation and ablation of SiC coating on graphite prepared by chemical vapor reaction10.1016/j.corsci.2013.05.009 ↗
9. A ZrC-SiC/ZrC-LaB6/ZrC multilayer ablation resistance coating for SiC-coated carbon/carbon composites10.1016/j.surfcoat.2016.12.010 ↗
10. Effect of Heat Treatment on the Microstructure and Phase Composition of ZrB2–MoSi2 Coating10.3390/coatings9120779 ↗
11. Ablation behaviour of the CVD-(ZrC/SiC)3 alternate coating on C/C composites under oxyacetylene torch with different heat fluxes10.1016/j.ceramint.2022.01.034 ↗
12. Ablation in different heatfluxes of C/C composites modified by ZrB2–ZrC and ZrB2–ZrC–SiC particles10.1016/j.corsci.2013.04.038 ↗
13. Ablation behavior of ZrC-SiC-ZrB2 and ZrC-SiCinhibited carbon/carbon composites components under ultrahigh temperature conditions10.1016/j.corsci.2021.109598 ↗
14. Ablation behavior of (ZrC/SiC)3 alternate coating prepared on sharp leading edge C/C composites by CVD10.1016/j.jmst.2021.10.049 ↗
15. Microstructure and ablation behavior of Zr-Ti-Si-C multiphase coating fabricated by solid solution and in-situ reaction10.1016/j.corsci.2021.109852 ↗
16. SiC/ZrB2–SiC–ZrC multilayer coating for carbon/carbon composites against ablation10.1016/j.surfcoat.2016.05.028 ↗
17. Ultra-high temperature ceramic coating for carbon/carbon composites against ablation above 2000 K10.1016/j.ceramint.2017.11.066 ↗
18. Microstructures and Ablation Resistance of ZrC Coating for SiC-Coated carbon/carbon composites prepared by supersonic plasma spraying10.1007/s11666-011-9676-3 ↗
19. Calcium phosphorus bio-coating on carbon/carbon composites: preparation, shear strength and bioactivity10.1016/j.apsusc.2017.05.073 ↗
20. Ablation resistance of TaC-modified HfC coating prepared by supersonic plasma spraying for SiC-coated carbon/carbon composites10.1016/j.ceramint.2019.06.011 ↗
21. Microstructure, mechanical properties and ablation behavior of ultra-high-temperature Ta-Hf-C solid solution coating prepared by a step-by-step plasma solid solution method10.1016/j.surfcoat.2020.126405 ↗
22. Mechanical and ablative properties improvement of HfC-SiC coatings upon introduction of TiC10.1016/j.jeurceramsoc.2022.05.035 ↗
23. Ultra-high temperature ablation behavior of CVD-Hf5TaC6 solid solution ceramic coating for C/C composites: experiment and first-principle calculation10.1016/j.jallcom.2023.171486 ↗
24. The System Zirconia-Hafnia10.1111/j.1151-2916.1968.tb11822.x ↗
25. Microstructure, mechanical properties and oxidation behavior of TaC- and HfC-based materials containing short SiC fiber10.1016/j.ceramint.2014.09.070 ↗
26. Thermal expansion behavior of particulate metal-matrix composites10.1016/S0266-3538(97)00124-3 ↗
27. Effects of SiC particle size on CTEs of SiCp/Al composites by pulsed electric current sintering10.1016/j.matchemphys.2005.10.019 ↗
28. Sintering behaviour, solid solution formation and characterisation of TaC, HfC and TaC–HfC fabricated by spark plasma sintering10.1016/j.jeurceramsoc.2016.02.009 ↗
29. Effects of thermal shock on the microstructure, mechanical and thermophysical properties of ZrC-C composites10.1016/j.compositesa.2021.106642 ↗
30. Ablation resistance of ZrC-MoSi2/ZrC-SiC double-layered coating in a plasma flame10.1016/j.corsci.2018.10.006 ↗