journal article·2024-04

The columnar dendrite and equiaxed dendrite transformation of high Nb-TiAl alloy by laser-directed energy deposition

Tengda Di, Jinlei Wang, Guangyi Ma, Chenchen Song, Fangyong Niu, Dongjiang Wu

Publisher page

Abstract

Laser-directed energy deposition (LDED) is a significant method for shaping high Nb-TiAl alloys. The dendrite type has an impact on the mechanical properties of parts fabricated with LDED. This study establishes a dendrite transformation model for the alloy. The refinement mechanism of microstructure and the strengthening mechanism of high-temperature mechanical properties are analyzed through experiment and simulation. The results show that the scanning rate has a significant influence on the dendrite type. Modifying the scanning rate brings about a gradual decrease in the G/ R (where G denotes temperature gradient and R is the growth rate) value of the molten pool, and a concurrent gradual increase in the value of G × R . These changes facilitate the transformation of columnar dendrites into equiaxed dendrites. Furthermore, the lamellar colony size is reduced by 72.8% and the tensile strength at 900 °C is increased by 16.2%. Microstructure refinement is the primary reason for the enhancement of high-temperature tensile characteristics, with dislocations and deformation twins also contributing to crack propagation resistance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Additive Manufacturing Materials and Processes · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Additive manufacturing of fine-grain fully lamellar titanium aluminide alloys10.1016/j.matdes.2023.111989 ↗
2. Analysis on phase transformation and lamellar formation of Ti-47.5Al-3Nb-1.5/3.5Cr alloys by confocal laser scanning in-situ observation10.1016/j.matchar.2023.112915 ↗
3. Additive manufacturing of micro/nano multiphase synergistically reinforced Ti-55Al-7.5Nb with a reticular boundary precipitate via direct laser deposition
4. Mitigating cracking in laser powder bed fusion of Ti-48Al-2Cr-2Nb via introducing massive beta phase10.1016/j.matchar.2022.112558 ↗
5. Microstructure modification of twin-wire directed energy deposition-arc fabricated gamma-TiAl alloy via deposition current control10.1016/j.msea.2022.144028 ↗
6. Finite-element analysis and experimental validation of thermal residual stress and distortion in electron beam additive manufactured Ti-6Al-4V build plates10.1016/j.jmatprotec.2016.06.032 ↗
7. Prediction of the interpass temperature of a wire arc additive manufactured wall: FEM simulations and artificial neural network
8. Process study for directed energy deposition of 316L stainless steel with TiB2 metal matrix composites10.18063/msam.v1i2.13 ↗
9. Fracture characterisation of vertically build functionally graded 316L stainless steel with Inconel 718 It deposited by directed energy deposition process10.1080/17452759.2022.2073793 ↗
10. Effects of laser-beam defocus on microstructural features of compositionally graded WC/Co-alloy composites additively manufactured by multi-beam laser directed energy deposition10.1038/s41598-020-65429-8 ↗
11. Laser directed energy deposition of high-carbon high-chromium D2 tool steel structures: processing, heat treatment and material behavior10.1007/s11665-022-07470-4 ↗
12. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
13. Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications10.1016/j.mattod.2021.03.020 ↗
14. Microstructural evolution and tensile property enhancement of remanufactured Ti6Al4V using hybrid manufacturing of laser directed energy deposition with laser shock peening
15. Microstructure characteristics and failure mechanisms of Ti-48Al-2Nb-2Cr titanium aluminide intermetallic alloy fabricated by directed energy deposition technique
16. Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing10.1016/j.actamat.2019.02.020 ↗
17. Insight into the mechanisms of columnar to equiaxed grain transition during metallic additive manufacturing - ScienceDirect
18. Stochastic modeling of columnar-to-equiaxed transition in Ti–(45–48 at%) Al alloy ingots10.1016/j.msea.2005.09.077 ↗
19. Effect of heat treatment on microstructure and mechanical properties of in-situ synthesized Ni2CrCoNb0.16 multi-principal element alloy manufactured by directed energy deposition10.1016/j.msea.2022.144398 ↗
20. In-situ grain structure control in directed energy deposition of Ti6Al4V
21. Sandwich structure printing of Ti-Ni-Ti by directed energy deposition10.1080/17452759.2022.2096647 ↗
22. Evaluate the effect of melt pool convection on grain structure of IN625 in laser melting process using experimentally validated process-structure modeling10.1016/j.jmatprotec.2022.117538 ↗
23. Microstructural and texture development in direct laser fabricated IN71810.1016/j.matchar.2013.12.012 ↗
24. The solidification path related columnar-to-equiaxed transition in Ti-Al alloys10.1016/j.intermet.2014.12.014 ↗
25. Anisotropic tensile behavior of Ti-47Al-2Cr-2Nb alloy fabricated by direct laser deposition
26. Evolution of microstructure and mechanical property of Ti-47Al-2Cr-2Nb intermetallic alloy by laser direct energy deposition: From a single-track, thin-wall to bulk10.1016/j.matchar.2022.112053 ↗
27. Formation of columnar lamellar colony grain structure in a high Nb-TiAl alloy by electron beam melting10.1016/j.jallcom.2019.151673 ↗
28. Precise measurements of thermophysical properties of liquid Ti–6Al–4V (Ti64) alloy on board the international space station10.1002/adem.202000169 ↗
29. Steady state columnar and equiaxed growth of dendrites and eutectic10.1016/0025-5416(84)90201-5 ↗
30. Single-crystal laser deposition of superalloys: processing-microstructure maps10.1016/S1359-6454(00)00367-0 ↗
31. Effects of substrate crystallographic orientations on crystal growth and microstructure formation in laser powder deposition of nickel-based superalloy10.1016/j.actamat.2014.12.046 ↗
32. Microstructure selection during the directionally peritectic solidification of Ti–Al binary system10.1016/j.intermet.2004.07.010 ↗
33. Crystal growth of TiAl alloys10.1016/S0966-9795(98)00056-9 ↗
34. Polysynthetic twinned TiAl single crystals for high-temperature applications10.1038/nmat4677 ↗
35. Comparison of microstructures and mechanical properties of as-cast and directionally solidified Ti-47Al-1W-0.5Si alloy10.1016/j.jallcom.2016.05.039 ↗