Core-shell structure polydopamine and polyethylenimine co-assisted MoS2-BaTiO3/polyarylene ether nitrile nanocomposites for high-temperature resistant organic dielectrics
Source abstract
Abstract
In this work, a novel nanoparticle ((MoS 2-BT)@ (PDA+PEI)) was constructed through two-dimensional molybdenum disulfide (MoS 2 ) and zero-dimensional barium titanate (BT) via in-situ polymerization and co-modification of polydopamine (PDA) and polyethylenimine (PEI). Then the nanofillers were dispersed in the Polyarylene ether nitrile (PEN) matrix by film casting to obtain PEN/(MoS 2 -BT)@ (PDA+PEI) nanocomposite dielectric films. Subsequently, the latter were subjected to chemical crosslinking at high temperature to obtain CPEN/(MoS 2 -BT)@ (PDA+PEI) nanocomposites. The effects of filler content on the properties of PEN matrix composite films were investigated. The results indicate excellent compatibility between (MoS 2 -BT)@ (PDA+PEI) and the PEN matrix due to the introduction of an organic modification layer, resulting in overall good performance of nanocomposite films, including good thermal stability with a glass transition temperature ( T g ) exceeding 240 °C after chemical crosslinking. The dielectric constant of CPEN nanocomposites containing 40 wt% of the hybrid nanoparticles is 20.2 and the dielectric loss is 0.032 at 1 kHz, the dielectric constant-temperature coefficient of all CPEN nanocomposites is less than 6 × 10 −4 °C −1 at the temperature range of 25–220 °C. In short, the incorporation of (MoS 2 -BT)@ (PDA+PEI) effectively enhances the thermal, mechanical, and dielectric properties of PEN-based nanocomposites.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric materials and actuators · Advanced Sensor and Energy Harvesting Materials · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Polymer-based dielectrics with high energy storage density10.1146/annurev-matsci-070214-021017 ↗
2. Recent progress and future prospects on all-organic polymer dielectrics for energy storage capacitors10.1021/acs.chemrev.1c00793 ↗
3. Preparation, structural analysis, morphological investigation and electrical properties of gold nanoparticles filled polyvinyl alcohol/carboxymethyl cellulose blend10.1016/j.jmrt.2019.09.074 ↗
4. Constructing a continuous amorphous carbon interlayer to enhance dielectric performance of carbon nanotubes/polyvinylidene fluoride nanocomposites10.1016/j.carbon.2017.01.105 ↗
5. MXene/rGO grafted sponge with an integrated hydrophobic structure towards light-driven phase change composites10.1016/j.compositesb.2023.110885 ↗
6. Preparation, structural and dielectric properties of nanocomposite Al2O3/BaTiO3 for multilayer ceramic capacitors applications10.1016/j.jmrt.2022.03.041 ↗
7. High-temperature energy storage properties in polyimide-based nanocomposites filled with antiferroelectric nanoparticles10.1016/j.jmrt.2020.08.030 ↗
8. Excellent energy storage performance of polyetherimide filled by oriented nanofibers with optimized diameters, Mater Today
9. Preparation and dielectric properties of surface modified TiO2/PEN composite films with high thermal stability and flexibility10.1007/s10854-012-0919-y ↗
10. Investigation on the dielectric performance of PVDF-HFP/LZO composites
11. Flexible h-BN/fluorinated poly (arylene ether nitrile) fibrous composite film with low dielectric constant and high thermal conductivity fabricated via coaxial electrospinning hot-pressing technique10.1016/j.colsurfa.2022.129455 ↗
12. The frequency independent functionalized MoS2 nanosheet/poly(arylene ether nitrile) composites with improved dielectric and thermal properties via mussel inspired surface chemistry10.1016/j.apsusc.2019.03.235 ↗
13. Polyarylene ether nitrile dielectric films modified by HNTs@PDA hybrids for high-temperature resistant organic electronics field10.1515/ntrev-2023-0117 ↗
14. Advanced composites based on end-capped polyarylene ether nitrile/bisphthalonitrile with controllable thermal curing reaction10.1016/j.polymer.2022.124695 ↗
15. Simple surface nanocrystallization approach to prepare Fe3O4/Fe-phthalocyanine@Nd2Fe14B composite as an excellent absorber10.1016/j.jallcom.2018.06.190 ↗
16. Controllable fabrication of poly(arylene ether nitrile) dielectrics for thermal-resistant film capacitors10.1021/acs.macromol.9b00799 ↗
17. Interfacial crosslinking enabled super-engineering polymer-based composites with ultra-stable dielectric properties beyond 350 °C
18. Electrically driven tuning of the dielectric constant in MoS2 layers10.1021/nn403738b ↗
19. Enhanced piezoelectricity of a PVDF-based nanocomposite utilizing high-yield dispersions of exfoliated few-layer MoS210.1016/j.ceramint.2019.02.213 ↗
20. Two-dimensional transition metal dichalcogenide nanosheet-based composites10.1039/C4CS00182F ↗
21. Barium titanate at the nanoscale: controlled synthesis and dielectric and ferroelectric properties10.1039/C8CS00583D ↗
22. Surface modified BaTiO3 nanoparticles by titanate coupling agent induce significantly enhanced breakdown strength and larger energy density in PVDF nanocomposite10.1016/j.compscitech.2017.12.025 ↗
23. Intensification of polymerization processes by reactive extrusion10.1021/acs.iecr.0c05078 ↗
24. Nano-scale phenomena and applications in polymer processing10.1016/j.ces.2007.02.052 ↗
25. A theoretical model for quiescent coarsening in immiscible polymer blends10.1002/aic.690481121 ↗
26. Double-layer core/shell-structured nanoparticles in polyarylene ether nitrile-based nanocomposites as flexible dielectric materials10.1039/C7RA03549G ↗
27. Cellulose nanofiber grafting and aluminum nitride deposition on the surface of expanded graphite to improve the thermal conductivity and mechanical properties of phase change material composites10.1016/j.compositesb.2021.109526 ↗
28. Enhanced dielectric properties of ferroelectric polymer composites induced by metal-semiconductor Zn-ZnO core–shell structure10.1021/am2016156 ↗
29. Mussel-inspired surface chemistry for multifunctional coatings10.1126/science.1147241 ↗
30. Inhibiting polysulfides with PDA/PEI-functionalized separators for stable lithium-sulfur batteries10.1002/er.6773 ↗
31. Numerical simulation and experimental validation of mixing performance of kneading discs in a twin screw extruder10.1002/pen.21404 ↗
32. In situ compatibilization of polypropylene and poly(butylene terephthalate) polymer blends by one-step reactive extrusion10.1016/0032-3861(96)00229-7 ↗
33. Reaction kinetics of multiphase polymer systems under flow10.1002/aic.10253 ↗
34. Local residence time, residence revolution, and residence volume distributions in twin-screw extruders10.1002/pen.20812 ↗
35. A concept of reactive compatibilizer-tracer for studying reactive polymer blending processes10.1002/aic.15074 ↗
36. Enhanced dielectric properties of poly(arylene ether nitrile) composite films employing MoS2-based semiconductors for organic film capacitor applications10.1016/j.mssp.2021.106127 ↗
37. Multifunctional fiberglass-reinforced PMMA-BaTiO3 structural/dielectric composites10.1016/j.polymer.2011.02.050 ↗
38. Poly(arylene ether nitrile) ternary dielectric composites modulated via polydopamine-assisted BaTiO3 decorating MoS2 sheets10.1016/j.ceramint.2020.04.253 ↗
39. Ultrahigh adsorption capacity of anionic dyes with sharp selectivity through the cationic charged hybrid nanofibrous membranes10.1016/j.cej.2016.10.145 ↗
40. Improving dielectric properties of poly(arylene ether nitrile) composites by employing core-shell structured BaTiO3@polydopamine and MoS2@polydopamine interlinked with poly(ethylene imine) for high-temperature applications10.1016/j.jallcom.2020.158213 ↗
41. Enhancing dielectric and mechanical properties of poly(arylene ether nitrile) based composites by introducing low content “core-shell” like structured MXene&PDA@ BaTiO310.1177/09540083211014936 ↗
42. Silica coating on barium titanate particles10.1016/0167-577X(95)00061-5 ↗
43. Studies on electrodeposition of Zn–MoS2 nanocomposite coatings on mild steel and its properties10.1007/s10008-011-1475-8 ↗
44. Enhanced antibiofouling of RO membranes via polydopamine coating and polyzwitterion immobilization10.1016/j.desal.2014.01.007 ↗
45. Styrene-maleic anhydride/polyethersulfone blending membranes modified by PEI functionalized TiO2 to enhance separation and antifouling properties: Dye purification10.1016/j.jece.2021.106040 ↗
46. Application of two-dimensional MoS2 nanosheets in the property improvement of polyimide matrix: Mechanical and thermal aspects10.1016/j.compositesa.2017.01.018 ↗
47. The relationship between processing and performances of polyarylene ether nitriles terminated with phthalonitrile/trifunctional phthalonitrile composites10.1007/s10965-015-0860-x ↗
48. Studied on mechanical, thermal and dielectric properties of BPh/PEN-OH copolymer10.1016/j.compositesb.2016.09.036 ↗
49. Compositional tailoring effect on electric field distribution for significantly enhanced breakdown strength and restrained conductive loss in sandwich-structured ceramic/polymer nanocomposites10.1039/C6TA10709E ↗
50. Dielectric properties and energy‐storage performance of two‐dimensional molybdenum disulfide nanosheets/polyimide composite films10.1002/app.47991 ↗
51. Chitin/MoS2 nanosheet dielectric composite films with significantly enhanced discharge energy density and efficiency10.1021/acs.biomac.0c00732 ↗
52. Polymer blend nanoarchitectonics with exfoliated molybdenum disulphide/polyvinyl chloride/nitrocellulose10.1007/s10904-022-02518-3 ↗
53. Simultaneously improved dielectric constant and breakdown strength of PVDF-based composites with polypyrrole nanowire encapsuled molybdenum disulfide nanosheets10.1007/s10118-022-2693-5 ↗
54. Core@double-shell structured fillers for increasing dielectric constant and suppressing dielectric loss of PVDF-based composite films10.1016/j.ceramint.2022.03.177 ↗
55. Core@double-shell structured BaTiO3–polymer nanocomposites with high dielectric constant and low dielectric loss for energy storage application10.1021/jp407340n ↗
56. H. Wang. Poly(vinylidene fluoride) polymer based nanocomposites with significantly reduced energy loss by filling with core-shell structured BaTiO3/SiO2 nanoparticles10.1063/1.4795017 ↗
57. High- k polymer nanocomposites filled with hyperbranched phthalocyanine-coated BaTiO3 for high-temperature and elevated field applications10.1021/acsami.8b01129 ↗
58. Effect of curing behaviors on the properties of poly(arylene ether nitrile) end-capped with phthalonitrile10.1002/app.36691 ↗