Evolution of micropores and second phases during hot deformation of 2050 Al-Li alloy
Source abstract
Abstract
Microporosity and second phases are typical components for casting 2050 alloy. In this paper, the evolution of both microporosity and the second phases during hot deformation of casting 2050 Al-Li alloy was studied. Firstly, based on industrial CT technology, the typical morphology characteristics of micropores during the hot deformation process of the alloy were studied and related statistics were carried out. The results show that with the increase of deformation strain, the volume, volume ratio, and porosity of the micropores gradually decreased, and the roundness gradually increased. Secondly, the detailed evolution mechanism of the second phases during hot deformation was studied by SEM, XRD, and TEM. It was found that with the increase of deformation strain, the thin plate T 1 phase gradually undergoes shearing and exhibits bend-shaped morphology in the SEM image, which was essentially a process of stress transfer from Al matrix to the T 1 phase. Meanwhile, the T 1 phase also experienced thinning and secondary precipitation. This is mainly attributed to the intensive interaction between the alloying elements within T 1 phase and the dislocations pile-up around T 1 phase during the hot deformation process. While for the large-size intermetallic phase AlCuFeMn, it breaks up gradually and oxide inclusion is generated at the broken site, which provides favorable conditions for the initiation and propagation of cracks during hot deformation. From TEM observation, it is found that there is Al 6 Mn intermetallic phase in the alloy matrix with different morphologies under different deformation strains. When the deformation strain reaches 70%, a large number of nanometer Al 6Mn particles are dynamically precipitated near the dislocations.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. New trend in aerospace industry: Al-Li based alloys
2. Development and characterization of Al-Li alloys10.1016/j.msea.2006.01.045 ↗
3. Corrosion of an advanced Al-Cu-Li alloy for aerospace applications10.4028/www.scientific.net/MSF.765.629 ↗
4. Microstructure, texture and mechanical properties of the rolled high modulus Mg-Y-Zn-Al-Li alloy[J]10.1016/j.msea.2021.142242 ↗
5. The corrosion behavior of Al-Cu-Li alloy in NaCl solution10.3390/coatings12121899 ↗
6. Evolution of microstructure and properties of novel aluminum-lithium alloy with different roll casting process parameters during twin-roll casting10.1016/j.matchar.2020.110145 ↗
7. Structural and mechanical characterization of as-cast Al-Li-Hf alloy[J]10.1080/10426910601134070 ↗
8. Hot deformation behavior and microstructure evolution of 1460 Al-Li alloy10.1016/S1003-6326(15)64033-X ↗
9. Effect of age-forming on microstructure, mechanical and corrosion properties of a novel Al-Li alloy10.1016/j.jallcom.2015.03.212 ↗
10. Constitutive behavior and microstructural evolution in hot deformed 2297 Al-Li alloy10.1016/j.cja.2019.03.042 ↗
11. Research progress on the microstructure and mechanical properties of friction stir welded Al-Li alloy joints10.1016/j.jmapro.2022.07.067 ↗
12. Effects of cooling rates on microporosity in DC casting Al-Li alloy10.1007/s41230-022-1183-2 ↗
13. Predicting hydrogen microporosity in long solidification range ternary Al-Cu-Li alloys by coupling CALPHAD and cellular automata model10.1016/j.commatsci.2023.112120 ↗
14. Cellular automaton modeling of microporosity formation during solidification of aluminum alloys10.2355/isijinternational.54.384 ↗
15. Micropore evolution in additively manufactured aluminum alloys under heat treatment and inter-layer rolling10.1016/j.matdes.2019.108288 ↗
16. Study on micropore evolution of quenched aluminum-copper alloy under stress
17. Microstructure and mechanical properties of the As-Cast Al-Li-Cu-Mg-Zr alloy with high Li content and different Cu/Mg ratios10.1002/adem.201901570 ↗
18. Effects of coarse Al2CuLi phase on the hot deformation behavior of Al-Li alloy10.1016/j.jallcom.2019.152469 ↗
19. Hot tensile deformation behavior and microstructural evolution of 2195 Al-Li alloy[J]10.1016/j.vacuum.2021.110176 ↗
20. Constitutive modeling and microstructure characterization of 2196 Al-Li alloy in various hot deformation conditions[J]10.1016/j.jmapro.2020.09.063 ↗
21. Hot deformation behavior and microstructural evolution of the Al-Cu-Li alloy: A study with processing map[J]10.1016/j.jallcom.2022.167755 ↗
22. Effect of temperature and strain rate on hot deformation behavior and microstructure of Al-Cu-Li alloy[J]10.1016/j.jallcom.2017.06.165 ↗
23. Plastic flow behavior and microstructure characteristics of light-weight 2060 Al-Li alloy[J]10.1016/j.msea.2018.09.010 ↗
24. Microporosity in cast alloys: simple considerations on its formation10.1179/136404609X367696 ↗
25. Solute-second phase interaction for Mg, Ag and Zn in Al-Li alloys10.1080/14786435.2020.1725249 ↗
26. Hot deformation behavior and microstructure evolution of the spray deposited and secondary hot extruded 2195 Al–Li alloy10.1016/j.jmrt.2022.08.055 ↗
27. Hot deformation behavior and microstructure mechanisms of As-Cast 2219 Al Alloy[J]
28. Hot compression deformation behavior and microstructure of As-Cast and homogenized AA2195 Al-Li alloy10.3390/met12101580 ↗
29. Shape prior metal artefact reduction algorithm for industrial 3D cone beam CT10.1080/10589759.2019.1709457 ↗
30. Volumetric CT scanning: 2D and 3D reconstruction10.1016/j.rmr.2010.10.009 ↗
31. Temperature dependence of misfit in different Co-Al-W ternary alloys measured by synchrotron X-ray diffraction10.1016/j.jallcom.2019.152940 ↗
32. Distribution and evolution of porous defects in spray formed 7XXX aluminum alloy10.1016/S1875-5372(15)60045-5 ↗
33. Improved mechanical properties of porous nitinol by aluminum alloying10.1016/j.jallcom.2022.165617 ↗
34. Microstructure evolution and densification of sintered porous 2024 aluminum alloy compressed in a semi-solid state10.1088/2053-1591/ac045f ↗
35. Influence of brazing time on liquid migration and cell structure of porous aluminum
36. Deformation behavior and characteristics of sintered porous 2024 aluminum alloy compressed in a semisolid state10.1016/j.msea.2016.07.120 ↗
37. On the accumulation of irreversible plastic strain during compression loading of open-pore metallic foams[J]10.1016/j.msea.2018.05.012 ↗
38. Nickel-aluminum diffusion: a study of evolution of microstructure and phase[J]10.1016/j.matchar.2017.05.039 ↗
39. Continuous casting of semisolid aluminium alloys10.4028/www.scientific.net/MSF.396-402.203 ↗
40. Modeling and simulation on microporosity formed during squeeze casting of aluminum alloy
41. Effects of microporosity on tensile properties of A356 aluminum alloy10.1016/j.msea.2007.01.130 ↗
42. Structures and properties of nano-precipitates in Al-Li alloys
43. Processing maps and microstructural evolution of Al-Cu-Li alloy during hot deformation[J]10.1007/s12598-016-0851-z ↗
44. Microstructure evolution of spray deposited and as-cast 2195 Al-Li alloys during homogenization[J]10.1016/j.jmst.2020.12.028 ↗
45. Microstructure and hot deformation behavior of a new aluminum–lithium–copper based AA2070 alloy[J]
46. Shapes of nano Al6Mn precipitates in Mn-containing Al-alloys10.1016/j.actamat.2023.118819 ↗
47. Dendrite morphology evolution of Al6Mn phase in suction casting Al-Mn alloys10.3390/ma13102388 ↗
48. T1 precipitate bands and particle stimulated nucleation in 2195 Al-Cu-Li alloy during hot deformation[J]10.1016/j.jallcom.2022.164716 ↗
49. Thermodynamics of formation of Al6Mn inter-metallic compound for mn removal from molten Al-Mg alloy
50. 3-D morphology and growth mechanism of primary Al6Mn intermetallic compound in directionally solidified Al-3at%Mn alloy[J]10.1016/j.intermet.2011.12.015 ↗
51. Faceted-nonfaceted growth transition and 3-D morphological evolution of primary Al6Mn microcrystals in directionally solidified Al-3 at% Mn alloy[J]10.1557/jmr.2014.111 ↗
52. Effects of alloying elements on the microstructure and corrosion behavior of Mg-Li-Al-Y alloys[J]10.1016/j.jallcom.2020.154344 ↗
53. Microstructure evolution of a modified AA5083 aluminum alloy during a multistage homogenization treatment10.1016/j.matchar.2011.12.006 ↗
54. Effect of preheat temperature on the orientation relationship of (Mn,Fe)Al6 precipitates in an AA 5182 aluminium—magnesium alloy10.1016/0956-7151(94)00261-F ↗
55. Precipitation crystallography of plate-shaped Al6(Mn,Fe) dispersoids in AA5182 alloy10.1016/j.actamat.2012.06.022 ↗
56. Microstructural evolution and mechanical properties of 2195 Al-Li alloy processed by rapid solidification and thermo-mechanical processing10.1016/j.jallcom.2023.169794 ↗
57. Microstructure evolution of spray deposited and as-cast 2195 Al-Li alloys during homogenization10.1016/j.jmst.2020.12.028 ↗
58. Orientation relationships of phase transformation in α-Al12Mn3Si pseudomorphs after plate-like Al6Mn precipitate in an AA3004 Al-Mn based alloy10.1016/j.matchar.2017.12.006 ↗