journal article·2024-02

Effect of the synthesis route on luminescence dynamics and thermographic properties of Sm3+ doped Ba2Mg(PO4)2 phosphor

Rajan Singh, A.K. Bedyal, M. Manhas, F. Durani, H.C. Swart, Vinay Kumar

Publisher page

Abstract

The present study investigates the impact of synthesis routes on the structure, optical, and thermographic properties of Ba 2Mg(PO 4) 2:xSm 3+ (x = 2 mol.%) phosphor. The two techniques used for the synthesis were combustion synthesis (CS) and solid-state reaction synthesis (SSR). X-ray diffraction analysis confirmed a pure monoclinic phase with space group P21/n in both SSR and CS synthesized samples. The average crystallite size was 41 ± 0.19 nm for SSR and 21 ± 0.02 nm for CS phosphors. Using Fourier transform infrared (FTIR) analysis, the vibrational behavior of both synthesized phosphor samples was analyzed. Both samples displayed a bright orange-red photoluminescence (PL) emission, attributed to the 4G 5/2→ 6H 7/2 transition when excited with 403 nm light at room temperature. However, the intensity of PL emission was higher in the CS-prepared sample. The UV-Vis absorption measurements indicated several bands in both samples. The CIE coordinates were calculated for both samples and they corresponded to the shade of orange-red emission of the Sm 3+ ions. The study also included an investigation into the temperature-sensing characteristics of the synthesized phosphors, which was performed in the 323–673 K temperature range. The fluorescence intensity ratio (FIR) technique was used to study the non-contact temperature sensing for both samples, and the CS-prepared phosphors exhibited the maximum value of absolute sensitivity (0.00629 K −1) and relative sensitivity (0.26 % K −1) at temperature 673 K. Overall, the results indicate that the CS method provides better results in terms of luminescence and temperature sensing characteristics compared to the SSR method.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Solid-state spectroscopy and crystallography · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Upconversion luminescence and optical temperature sensing of Er3+-doped La2Mo2O9 phosphors under 980 and 1550 nm excitation10.1016/j.solidstatesciences.2022.106966 ↗
2. Temperature sensing performance of ScVO4: Eu3+ phosphors by employing ground state thermal coupling approach10.1016/j.jallcom.2022.164340 ↗
3. Crystal structure and temperature sensing performance of the novel Sr2Y8(1-x-y)(SiO4)6O2: xCe3+, yTb3+ thermometric phosphors10.1016/j.jallcom.2022.167239 ↗
4. Dual-functions of non-contact optical thermometry and anti-counterfeiting based on La2MgGeO6: Bi3+, Er3+ phosphors10.1016/j.jlumin.2022.119404 ↗
5. Luminescence and temperature sensing properties of KLu(MoO4)2:Ln3+ phosphors10.1016/j.optmat.2022.112879 ↗
6. Luminescence and self-referenced optical temperature sensing performance in Ca2YZr2Al3O12:Bi3+, Eu3+ phosphors10.1016/j.ceramint.2019.11.081 ↗
7. Multimodal temperature sensing using Zn2GeO4: Mn2+ phosphor as highly sensitive luminescent thermometer10.1016/j.snb.2019.126640 ↗
8. Strong green emission of erbium (III)-Activated La2MgTiO6 phosphors for solid-state lighting and optical temperature sensors10.1021/acssuschemeng.0c09375 ↗
9. Y4GeO8: Er3+, Yb3+ up-conversion phosphors for optical temperature sensor based on FIR technique10.1016/j.jre.2021.06.007 ↗
10. Up-conversion properties of Ba3Lu2Zn5O11: Yb3+, Er3+ phosphors for optical thermometer based on FIR technique10.1016/j.jlumin.2021.118294 ↗
11. Temperature-sensing characteristics of NaGd (MoO4)2: Sm3+, Tb3+ phosphors10.1016/j.ceramint.2020.08.175 ↗
12. Tunable luminescence of LiY9(SiO4)6O2: Ce3+-Tb3+-Sm3+ phosphors for LED and temperature-sensing applications10.1016/j.jlumin.2019.116581 ↗
13. Double perovskite structure CaLaMgTaO6: Bi3+, Eu3+ co-doped phosphors for optical temperature measurement10.1016/j.jlumin.2021.118096 ↗
14. Dual-emitting SrY2O4: Bi3+, Eu3+ phosphor for ratiometric temperature sensing10.1016/j.jlumin.2019.116737 ↗
15. NaLa (MoO4)2:Sm3+, Tb3+ phosphor: optical temperature sensing material with a wide change range of luminescence color10.1016/j.jlumin.2019.116854 ↗
16. Luminescence and temperature sensing abilities of zincate phosphors co-doped bismuth Bi3+ and lanthanide Eu3+/Sm3+10.1016/j.materresbull.2020.110869 ↗
17. Sm3+-doped niobate orange-red phosphors with a double-perovskite structure for plant cultivation and temperature sensing10.1016/j.jallcom.2021.161671 ↗
18. Bifunctional application of La3BWO9:Bi3+, Sm3+ phosphors with strong orange-red emission and sensitive temperature sensing properties10.1039/D1DT02292J ↗
19. Charge compensated CaSr2(PO4)2:Sm3+, Li+/Na+/K+ phosphor: luminescence and thermometric studies10.1016/j.jallcom.2022.163793 ↗
20. High-brightness cyan-emitting Eu2+-activated orthophosphate phosphors for near-UV-pumped white LEDs10.1016/j.jlumin.2021.118640 ↗
21. Structural and spectroscopic characteristics of thermally stable Eu3+ activated barium zinc orthophosphate phosphor for white LEDs10.1016/j.ceramint.2020.07.263 ↗
22. Effects of cationic substitution on the luminescence behavior of Dy3+ doped orthophosphate phosphor10.1016/j.jallcom.2019.07.305 ↗
23. Color-tunable Eu3+-or Sm3+-doped perovskite phosphors as optical temperature-sensing materials10.1016/j.optmat.2020.110585 ↗
24. Highly sensitive optical thermometer of Sm3+, Mn4+ activated LaGaO3 phosphor for the regulated thermal behavior10.1111/jace.18286 ↗
25. Lanthanide ion-doped bismuth titanate nanocomposites for ratiometric thermometry with low pump power density10.1021/acsanm.9b01631 ↗
26. Highly sensitive self-referencing thermometry probe and advanced anti-counterfeiting based on the CDs/YVO4: Eu3+ composite materials10.1016/j.scriptamat.2020.05.015 ↗
27. Synthesis and characterizations of novel Ba2La8(SiO4)6O2:Eu3+oxyapatite phosphors10.1016/j.dyepig.2017.03.048 ↗
28. Photoluminescence studies of rare earth doped apatite structured phosphors10.1007/s10895-019-02439-4 ↗
29. UNITCELL: a nonlinear least-squares program for cell-parameter refinement and implementing regression and deletion diagnostics10.1107/S0021889896011673 ↗
30. Infrared spectroscopy and the structure of La0.33Zr2(PO4)3-Yb0.33Zr2(PO4)3 solid solutions10.1007/s10947-010-0006-2 ↗
31. Synthesis and characterization of Sm3+ activated La1−xGdxPO4 phosphors for white LEDs applications
32. Photoluminescence and quenching study of the Sm3+-doped LiBaPO4 phosphor
33. Surface and spectral investigation of Sm3+ doped MgO-ZrO2 phosphor10.1016/j.ijleo.2020.164909 ↗
34. Optimization of structural and luminescent properties with intense red emitting thermally stable Sm3+ doped CaBiVO5 phosphors for w-LED applications10.1016/j.optmat.2020.110119 ↗
35. Synthesis, structural and luminescence studies of LiSrVO4: Sm3+ nanophosphor to fill amber gap in LEDs under n-UV excitation
36. Spectroscopic properties of K4SrSi3O9 doped with Sm3+10.1016/j.jlumin.2015.12.031 ↗
37. Upconversion luminescence of Eu3+ and Sm3+ single-doped NaYF4 and NaY (MoO4)210.1016/j.jlumin.2021.118203 ↗
38. Samarium-activated La2Hf2O7 nanoparticles as multifunctional phosphors10.1021/acsomega.9b01318 ↗
39. Correlations between crystallite/particle size and photoluminescence properties of submicrometer phosphors10.1021/cm062887p ↗
40. Comparative investigation on synthesis and photoluminescence of YAG: Ce phosphor10.1016/j.mseb.2003.09.031 ↗
41. Luminescence properties of Sm3+ doped LaP3O9 phosphors10.1016/j.ijleo.2021.167264 ↗
42. Band-gap energy estimation from diffuse reflectance measurements on sol–gel and commercial TiO2: a comparative study10.1007/s10971-011-2582-9 ↗
43. The influence of Ag9+ ion irradiation on the structural, optical and luminescence properties of Sm3+ doped NaSrBO3: Stability of color emission10.1016/j.nimb.2015.03.088 ↗
44. Correlated color temperature as an explicit function of chromaticity coordinates10.1002/col.5080170211 ↗
45. Novel highly efficient and thermally stable Ca2GdTaO6: Eu3+ red-emitting phosphors with high color purity for UV/blue-excited WLEDs10.1016/j.jallcom.2019.06.388 ↗
46. Sensing temperature via downshifting emissions of lanthanide-doped metal oxides and salts. A review10.1088/2050-6120/4/4/042001 ↗
47. Energy transfer from VO43− group to Sm3+ ions in Ba3(VO4)2:3xSm3+ microparticles: a bifunctional platform for simultaneous optical thermometer and safety sign10.1016/j.cej.2018.07.019 ↗
48. Bismuth activated high thermal stability blue-emitting phosphor Na 2 Y 2 B 2 O 7: Bi used for near-UV white-light LEDs10.1039/D0TC04148C ↗
49. Ultra-high sensitivity of multicolor Sm3+-doped LiSrVO4 phosphors for contactless optical thermometers10.1039/D0DT01907K ↗
50. Synthesis of Mn2+:Zn2SiO4–Eu3+:Gd2O3 nanocomposites for highly sensitive optical thermometry through the synergistic luminescence from lanthanide-transition metal ions10.1039/C7TC01500C ↗
51. Thermographic properties of Sm3+-doped GdVO4 phosphor
52. Optical temperature sensing characteristics of Sm3+ doped YAG single crystal fiber based on luminescence emission10.1016/j.jallcom.2021.161844 ↗
53. Optical temperature sensing properties of Sm3+ doped SrWO4 phosphor10.1016/j.optmat.2018.02.031 ↗
54. Thermographic properties of Eu3+-and Sm3+-doped Lu2O3 nanophosphor10.2298/JSC121021140L ↗