Effect of friction stir processing on mechanical, in vitro degradation, and biocompatibility behaviour of stir casted Mg-Zn-rare earth oxide composites for biodegradable implant applications
Source abstract
Abstract
The current work takes the benefit of utilizing a composite approach by reinforcing Mg with Zn, Cerium oxide - a rare earth and bone-friendly ceramic, and bioactive hydroxyapatite to develop magnesium-based MMCs for high structural integrity and low degradation inside the human body via stir casting technique in a protective Ar-SF 6 environment. The friction stir processing (FSP) technique was employed to tailor the properties of as-cast Mg composites, resulting in further grain refinement and better dispersion of reinforced materials. Phase and microstructure analysis were analyzed via XRD , FESEM, and optical microscopy. During tensile tests, as-cast Mg-5Zn-1HA-1.5CeO 2 improved 68.6% in yield strength and 16.3% in ultimate tensile strength . After FSP, the same composite resulted in an overall improvement of 114.6% in yield strength and 31.9% in ultimate strength compared to as-cast pure Mg. Dispersion of inert bioceramics within the Mg matrix results in higher polarization resistance as per Electrochemical impedance spectroscopy (EIS). At the same time, a remarkable 81.6% reduction in H 2 emission and an 84.4% decrement in corrosion rate were found during the immersion study for Mg-5Zn-1HA-1.5CeO 2 composites. All Mg-based composites exhibited no cytotoxicity as cell viability evaluated via MTT assay was found to be greater than 80% for 50% and 25% extract concentrations. The composite’s hemolysis rate was below 5%, indicating acceptable hemocompatibility. This work provides insight into developing rare earth oxide-incorporated Mg composites with better mechanical capabilities and degradation resistance while avoiding the long-term cytotoxicity of rare-earth materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Ribeiro M., Monteiro F.J., Ferraz M.P. Infection of orthopedic implants with emphasis on bacterial adhesion process and techniques used in studying bacterial-material interactions 2012. https://doi.org/10.4161/biom.22905.10.4161/biom.22905 ↗
2. Development of new metallic alloys for biomedical applications10.1016/j.actbio.2012.06.037 ↗
3. Application of composites to orthopedic prostheses for effective bone healing: A review10.1016/j.compstruct.2014.07.052 ↗
4. The basic science of peri-implant bone healing10.4103/0019-5413.77129 ↗
5. Biodegradable metals10.1016/j.mser.2014.01.001 ↗
6. Reprint of: The history of biodegradable magnesium implants: A review10.1016/j.actbio.2015.07.017 ↗
7. Biocompatibility, biodegradation and excretion of polylactic acid (PLA) in medical implants and theranostic systems10.1016/j.cej.2018.01.010 ↗
8. Graphene-Doped Poly (Methyl-Methacrylate) (Pmma) Implants: A Micro-CT and Histomorphometrical Study in Rabbits
9. Accelerated biodegradation of iron-based implants via tantalum-implanted surface nanostructures
10. Protein adsorption and biodegradation behaviour of Mg–3Zn/HA for biomedical application10.1680/jnaen.18.00015 ↗
11. N. Anand K. Pal J. Mech. Behav. Biomed. Mater. Eval. Biodegrad. Zn. – 1Mg – 1Mn Zn. – 1Mg – 1Mn-1HA Compos. a Polym. -Ceram. Coat. PLA / HA / TiO 2 Orthop. Appl. 2022 136.10.1016/j.jmbbm.2022.105470 ↗
12. Investigation on microstructure, mechanical, biocorrosion and biocompatibility behavior of nano-sized TiO2@Al2O3 reinforced Mg-HAp composites10.1016/j.jallcom.2022.164866 ↗
13. Implant failure after biodegradable screw fixation in osteochondritis dissecans of the knee in skeletally immature patients10.1016/j.arthro.2014.08.032 ↗
14. Advances and challenges of biodegradable implant materials with a focus on magnesium-alloys and bacterial infections
15. Magnesium as a biodegradable and bioabsorbable material for medical implants10.1007/s11837-009-0129-0 ↗
16. Biodegradable magnesium‐based biomaterials: An overview of challenges and opportunities10.1002/mco2.59 ↗
17. Magnesium degradation products: Effects on tissue and human metabolism10.1002/jbm.a.35023 ↗
18. The importance of magnesium in clinical healthcare
19. The history of biodegradable magnesium implants: A review10.1016/j.actbio.2010.02.028 ↗
20. Research on an Mg–Zn alloy as a degradable biomaterial10.1016/j.actbio.2009.06.028 ↗
21. Evaluation of short-term effects of rare earth and other elements used in magnesium alloys on primary cells and cell lines10.1016/j.actbio.2009.09.024 ↗
22. The development of binary Mg–Ca alloys for use as biodegradable materials within bone10.1016/j.biomaterials.2007.12.021 ↗
23. Surface modifications of magnesium alloys for biomedical applications10.1007/s10439-011-0300-y ↗
24. Biomedical coatings on magnesium alloys – a review10.1016/j.actbio.2012.04.012 ↗
25. Influence of reinforcements in friction stir processed magnesium alloys: Insight in medical applications
26. Electrospun PCL/HA coated friction stir processed AZ31/HA composites for degradable implant applications10.1016/j.jmatprotec.2017.10.009 ↗
27. Influence of zinc on the microstructure, mechanical properties and in vitro corrosion behavior of magnesium–zinc binary alloys10.1016/j.jallcom.2015.06.227 ↗
28. Processing and properties of hydroxyapatite-based biomaterials for use as hard tissue replacement implants10.1557/JMR.1998.0015 ↗
29. Bio-based composites from plant based precursors and hydroxyapatite with shape-memory capability10.1016/j.compscitech.2020.108138 ↗
30. Synthesis and evaluation of magnesium/co-precipitated hydroxyapatite based composite for biomedical application10.1016/j.jmbbm.2021.104460 ↗
31. Comparative investigation of coating and friction stir processing on Mg-Zn-Dy alloy for improving antibacterial, bioactive and corrosion behaviour10.1016/j.surfcoat.2021.127708 ↗
32. Additively Manufactured Ti6Al4V-Si-Hydroxyapatite composites for articulating surfaces of load-bearing implants
33. Multi-length scale tribology of hydroxyapatite reinforced with ceria and silver10.1016/j.wear.2018.01.006 ↗
34. Significantly enhancing the ignition/compression/damping response of monolithic magnesium by addition of Sm2O3 nanoparticles10.3390/met7090357 ↗
35. Ce3+-ion, surface oxygen vacancy, and visible light-induced photocatalytic dye degradation and photocapacitive performance of CeO2-graphene nanostructures
36. The effect of cerium valence states at cerium oxide nanoparticle surfaces on cell proliferation10.1016/j.biomaterials.2014.01.074 ↗
37. Plasma sprayed cerium oxide coating inhibits H2O2-induced oxidative stress and supports cell viability
38. Improving mechanical properties of magnesium using nano-yttria reinforcement and microwave assisted powder metallurgy method10.1016/j.compscitech.2007.03.006 ↗
39. Mg-3Zn/HA biodegradable composites synthesized via spark plasma sintering for temporary orthopedic implants10.1007/s11665-019-04315-5 ↗
40. Method of stir casting of Aluminum metal matrix composites: a review10.1016/j.matpr.2017.01.130 ↗
41. Review of stir casting technique and technical challenges for ceramic reinforcement particulate and aluminium matrix composites
42. Development of high-strength magnesium alloys via combined processes of extrusion, rolling and ageing10.1016/j.scriptamat.2011.01.042 ↗
43. Friction stir welding and processing10.1016/j.mser.2005.07.001 ↗
44. High strain rate superplasticity in a friction stir processed 7075 Al alloy10.1016/S1359-6462(99)00329-2 ↗
45. Jamili A.M., Zarei-Hanzaki A., Abedi H.R., Mosayebi M., Kocich R., Kun Cick L. Development of fresh and fully recrystallized microstructures through friction stir processing of a rare earth bearing magnesium alloy 2019. https://doi.org/10.1016/j.msea.2019.138837.10.1016/j.msea.2019.138837 ↗
46. Jamili A.M., Zarei-Hanzaki A., Abedi H.R., Min Arik P. The grain boundary character distribution in thermomechanically processed rare earth bearing magnesium alloy 2019. https://doi.org/10.1016/j.jallcom.2019.04.306.10.1016/j.jallcom.2019.04.306 ↗
47. Simultaneous improvement of mechanical strength, ductility and corrosion resistance of stir cast Al7075-2% SiC micro- and nanocomposites by friction stir processing10.1016/j.jmapro.2017.09.005 ↗
48. M. Mosayebi A. Zarei-Hanzaki H.R. Abedi A.M. Jamili A. Ghaderi M. Barnett Dev. a Nov. RE-Texture Compon. a Mg-Y-RE/Sci. p Magnes. Compos. Frict. stir Process. 2019 doi: 10.1016/j.matlet.2019.126899.
49. Mosayebi M., Zarei-Hanzaki A., Abedi H.R., Barabi A., Jalali M.S., Ghaderi A., et al. The correlation between the recrystallization texture and subsequent isothermal grain growth in a friction stir processed rare earth containing magnesium alloy 2020. https://doi.org/10.1016/j.matchar.2020.110236.10.1016/j.matchar.2020.110236 ↗
50. M. Mosayebi A. Zarei-Hanzaki H.R. Abedi A. Ghaderi hierarchical Texture Evol. RE-Compon. Frict. stir Process. Mg-RE/Sci. p Compos. 2019 doi: 10.1016/j.matlet.2019.127209.10.1016/j.matlet.2019.127209 ↗
51. Mosayebi M., Zarei-Hanzaki A., Tahaghoghi M., Abedi H.R., Moshiri A., Ghaderi A. Effect of second phase particles on the microstructure and texture of rare earth elements containing magnesium matrix surface-composite produced by friction stir processing 2022. https://doi.org/10.1016/j.jmrt.2022.03.135.10.1016/j.jmrt.2022.03.135 ↗
52. Effect of friction stir processing (FSP) on microstructure and properties of Al–TiC in situ composite10.1016/j.msea.2011.02.085 ↗
53. Kasaeian-Naeini M., Sedighi M., Hashemi R., Delavar H. An investigation of constitutive modeling and 3D processing maps of Mg/HA composites for orthopedic applications 2022. https://doi.org/10.1016/j.jmrt.2022.06.044.10.1016/j.jmrt.2022.06.044 ↗
54. Microstructure, mechanical properties and fracture toughness of ECAPed magnesium matrix composite reinforced with hydroxyapatite ceramic particulates for bioabsorbable implants10.1016/j.ceramint.2023.02.069 ↗
55. Severe plastic deformation (SPD) of biodegradable magnesium alloys and composites: A review of developments and prospects-NC-ND license ( http://creativecommons.org/licenses/by-nc-nd/4.0/) Peer review under responsibility of Chongqing University10.1016/j.jma.2021.11.006 ↗
56. Synthesis of nanocrystalline hydroxyapatite by using precipitation method10.1016/j.jallcom.2006.05.018 ↗
57. Optimisation of hydroxyapatite (HAp) for orthopaedic application via the chemical precipitation technique. Kehoe, Sharon Optim Hydroxyapatite Orthop Appl via Chem Precip Tech PhD Thesis
58. Friction Stir Processing Influence on Microstructure, Mechanical, and Corrosion Behavior of Steels: A Review
59. ASTM E8/E8M standard test methods for tension testing of metallic materials 1
60. Structure, mechanical property and corrosion behaviors of (HA + β-TCP)/Mg–5Sn composite with interpenetrating networks10.1016/j.msec.2015.06.047 ↗
61. Corrosion and characterisation of dual phase Mg–Li–Ca alloy in Hank’s solution: the influence of microstructural features10.1016/j.corsci.2013.10.028 ↗
62. Experimental and numerical investigation on ZnP coated Mg-Mn based composite materials for internal fixation of tibia midshaft fracture: a comprehensive study10.1016/j.surfcoat.2022.128785 ↗
63. In vitro studies of biomedical magnesium alloys in a simulated physiological environment: A review10.1016/j.actbio.2010.12.004 ↗
64. Fractographic features of technically pure magnesium, AZ31 and ZK60 alloys subjected to stress corrosion cracking10.1016/j.msea.2019.138744 ↗
65. Grain size effect on tensile properties and slip systems of pure magnesium10.1016/j.actamat.2020.116604 ↗
66. Effect of Zener–Hollomon parameter on microstructure and mechanical properties of copper subjected to friction stir welding10.1007/s40195-019-00943-x ↗
67. Multi-solute solid solution behavior and its effect on the properties of magnesium alloys10.1016/j.jma.2022.06.015 ↗
68. An Orowan precipitate strengthening equation for mechanical twinning in Mg10.1016/j.ijplas.2018.08.010 ↗
69. Corrosion behavior of magnesium and magnesium-hydroxyapatite composite fabricated by friction stir processing in Dulbecco’s phosphate buffered saline10.1016/j.corsci.2016.01.002 ↗
70. Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation10.1016/j.corsci.2009.10.016 ↗
71. Microstructure, texture evolution, mechanical properties and corrosion behavior of ECAP processed ZK60 magnesium alloy for biodegradable applications10.1016/j.jmbbm.2014.05.024 ↗
72. Effect of galvanic corrosion on the degradability of biomedical magnesium10.3389/fmats.2021.767179 ↗
73. Large-scale preparation of superhydrophobic cerium dioxide nanocomposite coating with UV resistance, mechanical robustness, and anti-corrosion properties10.1016/j.surfcoat.2019.125312 ↗