Restraining formation of Fe-Li anti-site defects via in-situ surface construction on single-crystal LiFePO4 cathode for extending fast charging lifespan
Source abstract
Abstract
The widespread utilization of olivine LiFePO 4 is impeded by its inadequate electrochemical characteristics, primarily caused by the inherently low diffusion coefficient of Li + ions. This deficiency is further exacerbated by the presence of Fe-Li anti-site defects, which significantly deteriorate the diffusion coefficient during prolonged cycling periods. Herein, a highly efficient and cost-effective method is employed to fabricate single-crystal LiFePO 4 possessing minimal Fe-Li anti-site defects. The Fe-O bond is reinforced by the formation of a uniform and stable carbon layer through the introduction of acetylene. This reinforcement effectively hinders the migration of Fe ions to the 4a site, which is associated with the Li site (known as Li Fe defects). The validity of this phenomenon has been confirmed through theoretical calculations. The uniform carbon layer on LiFePO 4 surface not only facilitates the migration of Li + ions without obstruction but also significantly enhances the pseudo-capacitance, leading to remarkable preservation of capacity even at a high discharge rate of 10 C, with a retention rate of 80.86 % after undergoing 1500 cycles. The present study signifies a notable advancement in the acquisition of uniformly carbon-coated single-crystal cathode materials, thereby presenting a novel methodology for augmenting their electrochemical efficacy.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Thermal-responsive and fire-resistant materials for high-safety lithium-ion batteries
2. Characterization on thermal runaway of commercial 18650 lithium-ion batteries used in electric vehicles: a review10.1016/j.est.2021.102888 ↗
3. Thermoregulating separators based on phase-change materials for safe lithium-ion batteries
4. Progress on Fe-based polyanionic oxide cathodes materials toward grid-scale energy storage for sodium-ion batteries10.1002/smtd.202200555 ↗
5. Recent progress in sustainable recycling of LiFePO4-type lithium-ion batteries: strategies for highly selective lithium recovery10.1016/j.cej.2021.133993 ↗
6. Lithium manganese spinel cathodes for lithium-ion batteries10.1002/aenm.202000997 ↗
7. Nickel-rich layered oxide cathodes for lithium-ion batteries: failure mechanisms and modification strategies10.1016/j.est.2022.106405 ↗
8. In situ electrochemical regeneration of degraded LiFePO4 electrode with functionalized prelithiation separator10.1002/aenm.202103630 ↗
9. Reaction heterogeneity in LiFePO4 agglomerates and the role of intercalation-induced stress10.1021/acsenergylett.2c00226 ↗
10. Overcoming the interfacial challenges of LiFePO4 in inorganic all-solid-state batteries10.1021/acsenergylett.2c02138 ↗
11. Review on defects and modification methods of LiFePO4 cathode material for lithium-ion batteries10.1021/acs.energyfuels.1c03757 ↗
12. b-Axis phase boundary movement induced (020) plane cracking in LiFePO410.1021/acsami.0c10838 ↗
13. Revealing the ultrahigh rate performance of the La and Ce co-doping LiFePO4 composite10.1021/acsaem.2c02035 ↗
14. In-situ self-polymerization restriction to form core-shell LiFePO4/C nanocomposite with ultrafast rate capability for high-power Li-ion batteries10.1016/j.nanoen.2017.07.001 ↗
15. Non-topotactic reactions enable high rate capability in Li-rich cathode materials10.1038/s41560-021-00817-6 ↗
16. Metal-organic framework-derived LiFePO4 cathode encapsulated in O, F-codoped carbon matrix towards superior lithium storage10.1016/j.nanoen.2021.106655 ↗
17. Mn substitution controlled Li-diffusion in single crystalline nanotubular LiFePO4 high rate-capability cathodes: experimental and theoretical studies10.1016/j.jpowsour.2018.10.020 ↗
18. Precise surface engineering of cathode materials for improved stability of lithium-ion batteries
19. Design of LiFePO4 and porous carbon composites with excellent high-rate charging performance for lithium-ion secondary battery10.1016/j.jcis.2021.09.118 ↗
20. In situ self-catalyzed formation of carbon nanotube wrapped and amorphous nanocarbon shell coated LiFePO4 microclew for high-power lithium ion batteries10.1016/j.carbon.2022.12.015 ↗
21. Structure and performance of the LiFePO4 cathode material: from the bulk to the surface10.1039/D0NR03776A ↗
22. Long-life regenerated LiFePO4 from spent cathode by elevating the d-band center of Fe
23. Syntheses, challenges and modifications of single-crystal cathodes for lithium-ion battery10.1016/j.jechem.2021.10.022 ↗
24. Ultralong lifespan and ultrafast Li storage: single-crystal LiFePO4 nanomeshes10.1002/smll.201502743 ↗
25. Reciprocal salt flux growth of LiFePO4 single crystals with controlled defect concentrations10.1021/cm4027682 ↗
26. Single-crystal LiFePO4 nanosheets for high-rate Li-ion batteries10.1021/nl5008568 ↗
27. General facet-controlled synthesis of single-crystal {010}-oriented LiMPO4 (M = Mn, Fe, Co) nanosheets10.1021/acs.chemmater.7b04514 ↗
28. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
29. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
30. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
31. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
32. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu10.1063/1.3382344 ↗
33. Structure and interface design enable stable Li-rich cathode10.1021/jacs.0c02302 ↗
34. Revealing the thermodynamics and kinetics of in-plane disordered Li2MnO3 structure in Li-rich cathodes10.1021/acsenergylett.1c01904 ↗
35. Accelerated removal of Fe-anti-site defects while nanosizing hydrothermal LiFePO4 with Ca2+10.1021/acs.nanolett.6b00334 ↗
36. Electrochemical performance of nano-LiFePO4 embedded ordered mesoporous nitrogenous carbon composite as cathode material for Li-ion battery applications10.1016/j.jelechem.2019.113242 ↗
37. Nanoscale characteristics of practical LiFePO4 materials-Effects on electrical, magnetic and electrochemical properties10.1016/j.matchar.2020.110171 ↗
38. Suppressing Fe-Li antisite defects in LiFePO4/carbon hybrid microtube to enhance the lithium ion storage10.1002/aenm.201601549 ↗
39. LiFePO4/rGO composite prepared from the leaching liquor of jarosite residue as a cathode material for lithium-ion batterier10.1016/j.jallcom.2023.170105 ↗
40. High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance10.1038/nmat3601 ↗
41. Achieving high energy density and high power density with pseudocapacitive materials10.1038/s41578-019-0142-z ↗
42. S. Zheng, Homologous strategy to construct high-performance coupling electrodes for advanced potassium-ion hybrid capacitors10.1007/s40820-020-00524-z ↗
43. High-voltage and high-safety nickel-rich layered cathode enabled by a self-reconstructive cathode/electrolyte interphase layer10.1016/j.ensm.2021.06.018 ↗
44. Understanding the outstanding high-voltage performance of NCM523||graphite lithium ion cells after elimination of ethylene carbonate solvent from conventional electrolyte
45. An integrated surface coating strategy to enhance the electrochemical performance of nickel-rich layered cathodes10.1016/j.nanoen.2021.106665 ↗