Zinc-substituted P2-type Na0.67Ni0.23Zn0.1Mn0.67O2 cathode with improved rate capability and cyclic stability for sodium-ion storage at high voltage
Source abstract
Abstract
P2-type layered transition metal oxides are considered one of the ideal cathode materials for sodium ion batteries because of its high working voltage and excellent theoretical specific capacity. P2-Na 0.67Ni 0.33Mn 0.67O 2 electrodes deliver a theoretical specific capacity of 173 mAh g -1, which is dependent on Ni 2+/Ni 3+/Ni 4+ charge compensation. High operating voltage leads to higher specific capacity and energy density, which are better adapted to practical development needs, but at the same time it causes the material to undergo a destructive P2-O2 phase transition, which greatly affect cycle stability and Na + diffusion kinetics. In this study, we propose Zn 2+ doping and spherical morphology modification strategy. The spherical morphology not only reduces the distance of Na + diffusion and improves the rate performance, but also the spherical structure can alleviate the volume change during Na + intercalation/extraction. Furthermore, the doping of Zn 2+ changes the valence distribution of Mn, suppressing the phase transition at high voltage and further improving the cycling stability. At a high cut-off voltage of 4.4 V, the cathode material with Zn 2+ doping and spherical shaped possesses an average operating voltage of up to 3.6 V and exhibits 90% capacity retention after 30 cycles (compared to only 56% for the pristine material). Above that, the rate performance is also greatly improved, with the modified material contributing an excellent specific capacity of 95 mAh g -1, even at a high current density of 5 C (1 C = 170 mA g -1).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Sodium-ion batteries10.1002/adfm.201200691 ↗
2. Regulated electrochemical performance of manganese oxide cathode for potassium-ion batteries: a combined experimental and first-principles density functional theory (DFT) investigation10.1016/j.jcis.2022.11.070 ↗
3. Model improvement and SOC estimation based on aluminium ion batteries10.1088/2631-8695/abe7d2 ↗
4. Room-temperature stationary sodium-ion batteries for large-scale electric energy storage10.1039/c3ee40847g ↗
5. Update on Na-based battery materials. A growing research path10.1039/c3ee41031e ↗
6. Synthesis, structure, and electrochemical properties of the layered sodium insertion cathode material: NaNi1/3Mn1/3 Co1/3O210.1021/cm300466b ↗
7. Layered Na[Ni1/3Fe1/3Mn1/3]O2 cathodes for Na-ion battery application10.1016/j.elecom.2012.02.020 ↗
8. Characterization of Na-based phosphate as electrode materials for electrochemical cells10.1016/j.jpowsour.2011.06.061 ↗
9. Carbon coated hollow Na2FePO4F spheres for Na-ion battery cathodes10.1016/j.jpowsour.2012.09.059 ↗
10. Prussian blue: a new framework of electrode materials for sodium batteries10.1039/c2cc31777j ↗
11. A superior low-cost cathode for a Na-Ion battery10.1002/anie.201206854 ↗
12. Large π-conjugated porous frameworks as cathodes for sodium-ion batteries10.1021/acs.jpclett.8b01285 ↗
13. Pillararene/calixarene-based systems for battery and supercapacitor applications10.1016/j.esci.2021.10.001 ↗
14. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
15. Structural classification and properties of the layered oxides10.1016/0378-4363(80)90214-4 ↗
16. P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na+ batteries10.1038/nmat3309 ↗
17. Research development on sodium-ion batteries10.1021/cr500192f ↗
18. An advanced cathode for Na-ion batteries with high rate and excellent structural stability10.1039/c2cp44467d ↗
19. Layered P2-type Na0.5Ni0.25Mn0.75O2 as a high performance cathode material for sodium-ion batteries10.1016/j.electacta.2016.04.138 ↗
20. Sodium insertion cathode material Na0.67[Ni0.4Co0.2Mn0.4]O2 with excellent electrochemical properties10.1016/j.electacta.2016.04.067 ↗
21. New insights into designing high-rate performance cathode materials for sodium ion batteries by enlarging the slab-spacing of the Na-ion diffusion layer10.1039/C5TA10589G ↗
22. Suppressing the P2-O2 phase transition of Na0.67 Mn0.67 Ni0.33 O2 by magnesium substitution for improved sodium-ion batteries10.1002/anie.201602202 ↗
23. Fast and highly reversible Na+ intercalation/extraction in Zn/Mg dual-doped P2-Na0.67MnO2 cathode material for high-performance Na-ion batteries10.1007/s12274-021-3715-2 ↗
24. Copper-substituted Na0.67Ni0.3−xCuxMn0.7O2 cathode materials for sodium-ion batteries with suppressed P2-O2 phase transition10.1039/C7TA00880E ↗
25. Advanced P2-Na2/3Ni1/3Mn7/12Fe1/12O2 cathode material with suppressed P2–O2 phase transition toward high-performance sodium-ion battery10.1021/acsami.8b12204 ↗
26. Influence of sintering temperature on the electrochemical properties of P2-type Na0.67Mn0.7Ni0.2Mg0.1O2 cathodes for sodium-ion batteries10.1016/j.jssc.2022.122916 ↗
27. Insights into the Ti4+ doping in P2-type Na0.67Ni0.33Mn0.52Ti0.15O2 for enhanced performance of sodium-ion batteries10.1016/j.jmst.2020.06.055 ↗
28. Exceptionally highly stable cycling performance and facile oxygen-redox of manganese-based cathode materials for rechargeable sodium batteries10.1016/j.nanoen.2019.02.042 ↗
29. Improving structural and moisture stability of P2-layered cathode materials for sodium-ion batteries10.1021/acsaem.1c03656 ↗
30. Ultralow-strain Zn-substituted layered oxide cathode with suppressed P2-O2 transition for stable sodium ion storage
31. Unusual site-selective doping in layered cathode strengthens electrostatic cohesion of alkali-metal layer for practicable sodium-ion full cell10.1002/adma.202103210 ↗
32. Exploration of a Na3V2(PO4)(3)/C -Pb full cell Na-ion prototype10.1016/j.nanoen.2022.107010 ↗
33. One-pot synthesis of P2-type layered sodium oxides with high capacity and super-long life for sodium-ion batteries10.1016/j.ssi.2019.115211 ↗
34. Carbon-coated FePO(4)nanoparticles as stable cathode for Na-ion batteries: a promising full cell with a Na15Pb4 anode10.1016/j.electacta.2022.139997 ↗
35. Rational design of a P2-type spherical layered oxide cathode for high-performance sodium-ion batteries10.1021/acscentsci.9b00982 ↗
36. Dual-strategy modification on P2-Na0.67Ni0.33Mn0.67O2 realizes stable high-voltage cathode and high energy density full cell for sodium-ion batteries10.1002/sus2.105 ↗
37. GSAS-II: the genesis of a modern open-source all purpose crystallography software package10.1107/S0021889813003531 ↗
38. High energy density sodium-ion battery with industrially feasible and air-stable O3-type layered oxide cathode
39. Hierarchical O3/P2 heterostructured cathode materials for advanced sodium-ion batteries10.1016/j.ensm.2022.02.043 ↗
40. One-pot synthesis of P2-type layered sodium oxides with high capacity andsuper-long life for sodium-ion batteries10.1016/j.ssi.2019.115211 ↗
41. Electrochemical Electrochemical study of Na0.66Ni0.33Mn0.67-xMoxO2 as cathode material for sodium-ion battery10.1016/j.jallcom.2017.02.200 ↗
42. Structural and electrochemical evolution with post-annealing temperature of solution-based LiNi0.5Mn1.5O4 thin-film cathodes for microbatteries with cyclic stability10.1016/j.electacta.2014.05.161 ↗
43. P2-Na0.67AlxMn1−xO2: cost-effective, stable and high-rate sodium electrodes by suppressing phase transitions and enhancing sodium cation mobility10.1002/anie.201911698 ↗
44. P'2-Na2/3Mn0.9Me0.1O2 (Me = Mg, Ti, Co, Ni, Cu, and Zn): correlation between orthorhombic distortion and electrochemical property10.1021/acs.chemmater.7b02772 ↗
45. A melatonin-inspired coating as an electrolyte preservative for layered oxide cathode-based lithium batteries10.1016/j.cej.2022.135032 ↗
46. Insights into the effects of zinc doping on structural phase transition of P2-type sodium nickel manganese oxide cathodes for high-energy sodium ion batteries10.1021/acsami.6b06701 ↗
47. Flexible solvent-free polymer electrolytes for solid-state Na batteries10.1016/j.jpowsour.2023.232644 ↗
48. Improving the electrochemical performance of Na3V2O2(PO4)(2)F cathode by using a defect-containing TiO2-x coating for sodium ion batteries10.1016/j.jallcom.2019.152270 ↗
49. Development of sodium hybrid quasi-solid electrolytes based on porous NASICON and ionic liquids10.1016/j.jeurceramsoc.2021.08.001 ↗
50. Designing superior solid electrolyte interfaces on silicon anodes for high-performance lithium-ion batteries10.1039/C9NR05748J ↗
51. Stabilizing the anionic redox in 4.6V LiCoO2 cathode through adjusting oxygen magnetic moment10.1002/adfm.202202679 ↗
52. Multiple effects of Mg1−xNixO coating on P2-type Na0.67Ni0.33Mn0.67O2 to generate highly stable cathodes for sodium-ion batteries10.1016/j.jallcom.2020.157294 ↗
53. Suppressing interlayer-gliding and Jahn-Teller effect in P2-type layered manganese oxide cathode via Mo doping for sodium-ion batteries
54. Study on the reversible electrode reaction of Na1–xNi0.5Mn0.5O2 for a rechargeable sodium-ion battery10.1021/ic300357d ↗
55. Advancing layered cathode material's cycling stability from uniform doping to non-uniform doping10.1039/D0TA05262K ↗
56. Cathode electrolyte interphase (CEI) Endows Mo6S8 with fast interfacial magnesium-ion transfer kinetics
57. Dissolution of cathode-electrolyte interphase deposited on LiNi0.5Mn1.5O4 for lithium-ion batteries10.1016/j.jpowsour.2021.230051 ↗
58. Stable sodium-based batteries with advanced electrolytes and layered-oxide cathodes10.1021/acsami.2c05402 ↗
59. A bilayer interface formed in high concentration electrolyte with SbF3 additive for long-cycle and high-rate sodium metal battery10.1016/j.jpowsour.2020.227956 ↗
60. Effect of fluoroethylene carbonate (FEC) on the performance and surface chemistry of Si-nanowire li-ion battery anodes10.1021/la203712s ↗
61. Stable sodium anodes for sodium metal batteries (SMBs) enabled by in-situ formed quasi solid-state polymer electrolyte10.1016/j.jechem.2022.09.040 ↗