journal article·2023-12

Brazing of graphite to tungsten using graphene nanoplates reinforced TiNiCu composite filler

Duo Liu, Ke Liu, Yanyu Song, Xingyi Li, Ruifen Liu, Yiran Li, Shengpeng Hu, Xiaoguo Song

Publisher page

Abstract

Graphene nanoplates (GNPs) reinforced TiNiCu composite filler (TiNiCu G ) developed with which the brazing of graphite to W was achieved in this study. The effects of the GNPs reinforcement and brazing temperature (1120–1200 °C) on the interfacial microstructure and mechanical properties of brazed joints were implemented in detail. Experimental results revealed that the bonding of graphite and filler material was achieved through the formation of a TiC reaction layer. A well bonded TiC/Ti(Ni,Cu) interface with lattice mismatch of 6.8% was observed by HRTEM. The FCC TiC and monoclinic Ti(Ni,Cu) taken the coherent orientation relations of [0 1 ̅ 1] fcc║[331]. The typical interfacial microstructure of graphite/W joint using TiNiCu G at 1180 °C for 15 min was graphite/Ti(Ni,Cu)+ Ti 2 (Ni,Cu)+TiC /W(Ti)ss/W. The added GNPs reacted with Ti and in-situ synthesized TiC particles by reducing the residual stress to strengthen the brazed joint and increase the thickness of the brazing seam. The shear strength of the joint using composite filler reached the maximum value of 37.59 MPa, 132% higher than that joint without using GNPs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Materials for future nuclear energy systems10.1016/j.jnucmat.2019.151837 ↗
2. Structural materials for fission & fusion energy10.1016/S1369-7021(09)70294-9 ↗
3. Are nanoporous materials radiation resistant?10.1021/nl201383u ↗
4. Diagnostic X-ray sources—present and future10.1016/j.nima.2017.05.034 ↗
5. Joining of AlN and graphite disks using interlayer tapes by spark plasma sintering10.1016/j.matdes.2013.09.003 ↗
6. Material properties and structure of natural graphite sheet10.1038/s41598-020-75393-y ↗
7. Insights into the adsorption and interfacial products improving the wetting of the Ag-Ti/graphite and Cu-Ti/graphite systems: a first-principles calculation
8. Wettability and bonding of graphite by Sn0.3Ag0.7Cu-Ti alloys10.1016/j.carbon.2017.06.030 ↗
9. Effect of bonding time on the microstructure and mechanical properties of graphite/Cu-bonded joints10.1515/rams-2021-0071 ↗
10. Materials research for fusion10.1038/nphys3735 ↗
11. Advanced materials for fusion technology10.1016/j.fusengdes.2005.08.008 ↗
12. A full tungsten divertor for ITER: Physics issues and design status10.1016/j.jnucmat.2013.01.008 ↗
13. Response of unalloyed tungsten to mixed spectrum neutrons10.1016/j.jnucmat.2019.03.045 ↗
14. Brazing of SiO2f/SiO2 composite modified with few-layer graphene and Invar using AgCuTi alloy10.1016/j.matdes.2015.08.146 ↗
15. Brazing transparent YAG to Ti6Al4V: reactivity and characterization10.1016/j.jeurceramsoc.2016.05.022 ↗
16. Influence of bolting parameters on the ultimate tensile strength and stiffness of composite-metal joints#10.1080/15397730903476316 ↗
17. Biomimetic coating of laminin–apatite composite on titanium metal and its excellent cell-adhesive properties10.1002/adma.200400152 ↗
18. Fabrication of Si3N4/Cu direct-bonded heterogeneous interface assisted by laser irradiation10.1016/j.jmst.2021.05.032 ↗
19. Graphene nanoplatelets reinforced AgCuTi composite filler for brazing SiC ceramic10.1016/j.jeurceramsoc.2018.11.046 ↗
20. Microstructural characterization of graphite/CuCrZr joints brazed with CuTiH2 Ni-based fillers10.1016/j.jallcom.2017.05.019 ↗
21. Characterization of innovative CFC/Cu joints by full-field measurements and finite elements10.1016/j.msea.2013.12.015 ↗
22. Intrinsic contact angle and contact interaction between liquid silver and solid graphite10.1007/BF03027556 ↗
23. Surface modification on wetting and vacuum brazing behavior of graphite using AgCu filler metal10.1016/j.surfcoat.2018.05.039 ↗
24. Reactive wetting and interfacial characterization of ZrO2 by SnAgCu-Ti alloy10.1016/j.ceramint.2018.12.163 ↗
25. Effect of brazing temperature on microstructure and mechanical properties of graphite/copper joints10.1016/j.msea.2013.11.059 ↗
26. Pulsed current-assisted joining of copper to graphite using Ti-Cu brazing layers10.1016/j.matpr.2019.12.095 ↗
27. Interfacial microstructure and mechanical properties of brazing carbon/carbon composites to stainless steel using diamond particles reinforced Ag-Cu-Ti brazing alloy10.1016/j.jallcom.2017.05.151 ↗
28. Characterization of the Si3N4/Si3N4 joints fabricated using particles modified braze10.1016/j.msea.2014.08.023 ↗
29. Brazing of C/C composites to Ti6Al4V using graphene nanoplatelets reinforced TiCuZrNi brazing alloy10.1016/j.matlet.2016.07.111 ↗
30. The microstructure and mechanical properties of C/C composite/Ti3Al alloy brazed joint with graphene nanoplatelet strengthened Ag-Cu-Ti filler10.1016/j.ceramint.2019.01.203 ↗
31. Study on 3-dimensional graphene sponge reinforced C/C composites-TiAl alloy brazed joints10.1016/j.msea.2022.142832 ↗
32. Graphene-enhanced Cu composite interlayer for contact reaction brazing aluminum alloy 606110.1016/j.vacuum.2016.11.032 ↗
33. Brazing of metallized SiC ceramic to GH99 superalloy using graphene nanoplatelets reinforced AgCuTi composite filler10.1016/j.ceramint.2019.01.227 ↗
34. Effect of GNPs on interfacial microstructure evolution and mechanical property of Cf/SiC-GH99 joints10.1016/j.matchar.2022.112563 ↗
35. In situ formation of TiC composite using selective laser melting10.1016/S0025-5408(00)00339-1 ↗
36. Eutectic-reaction brazing of Al0.3CoCrFeNi high-entropy alloys using Ni/Nb/Ni interlayers10.1016/j.jmst.2021.12.066 ↗
37. The TiC/Ni-Cr composites with low thermal expansion and electrical resistivity applied for IT-SOFC interconnects10.1002/adem.201600190 ↗