Effect of grain thickness and T1 precipitate on the strength anisotropy of Al-4.0Cu-1.0Li-0.4Mg-0.4Ag-xZr alloys under different heat treatment
Source abstract
Abstract
The influences of grain thickness and T 1 precipitate on the strength anisotropy of extruded Al-4.0Cu-1.0Li-0.4Mg-0.4Ag-xZr alloys (x = 0, 0.1, and 0.14 wt%) were investigated. The alloys were subjected to different heat-treatment conditions to obtain distinct grain morphologies adjusted by different Zr content and to induce T 1 precipitate. The results demonstrated that grain morphology, particularly the grain thickness influenced by various Zr content, is the primary factor affecting strength anisotropy under different heat treatment conditions. In solution heat-treated alloys (SHT), reduced grain thickness, extended length of low-angle grain boundaries (LAGBs), and more uniformly distributed dislocations due to increasing Zr content led to a decrease in strength anisotropy. Conversely, in T6-aged alloys, the combined interaction between T 1 precipitate and substructures in thinner grains with more LAGBs may aggravate the degree of strength anisotropy. In addition, the T 1 precipitate further amplified the anisotropy induced by the Brass texture component also increasing strength anisotropy. The findings highlight the significance of grain thickness, LAGBs length, dislocation distribution, and the interaction between T 1 precipitate and these factors in influencing the strength anisotropy of Al-Li alloys. Moreover, after solution heat treatment, adding 0.1 wt% Zr in the alloy reinforced the intensity of β-fiber texture while adding 0.14 wt% Zr wakened the β-fiber texture intensity due to the particle-simulated recrystallization process.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Research on microstructure and mechanical properties of 2050 Al-Li alloy during non-isothermal aging10.1016/j.jallcom.2022.163977 ↗
2. Influence of pre-stretching on the tensile strength, fatigue properties and the in-plane anisotropy in Al-Cu-Li alloy AA209910.1016/j.jmst.2022.10.028 ↗
3. Hot tensile deformation behavior, fracture mechanism and microstructural evolution of 2195 Al-Li alloy10.1016/j.jallcom.2023.169426 ↗
4. Evolution of microstructure and texture in the third generation Al-Li alloy AA2195 during warm hybrid processing10.1016/j.jallcom.2020.156750 ↗
5. Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: a review10.1016/j.jare.2017.12.004 ↗
6. Influence of microstructural and crystallographic inhomogeneity on tensile anisotropy in thick-section Al–Li–Cu–Mg plates10.1016/j.msea.2021.142135 ↗
7. Effect of Zr addition on the microstructure evolution and mechanical properties of extruded Al-Cu-Li-Mn alloys10.1016/j.matchar.2023.113011 ↗
8. On the role of grain structure and crystal orientation in governing fatigue crack propagation behavior of Al-Cu-Li alloy10.1016/j.jallcom.2023.169317 ↗
9. Investigation of anisotropy and structure variation of spray-formed 2195 Al-Li alloy via final temperature-controlled rolling and cold rolling10.1016/j.jallcom.2022.168414 ↗
10. Good combination of strength and mechanical isotropy in AA6082 alloy processed by high temperature intermediate annealing10.1016/j.jallcom.2022.166229 ↗
11. Enhanced grain refinement and texture weakening in Al–Mg–Si alloy through a novel thermomechanical processing10.1016/j.jallcom.2022.166654 ↗
12. Effect of forging pretreatment on the microstructures and mechanical properties of the Al-Cu-Li alloy10.1016/j.jallcom.2023.171379 ↗
13. Microstructure evolution and mechanical properties of 2196 Al-Li alloy in hot extrusion process10.1016/j.jmatprotec.2019.116348 ↗
14. On fracture anisotropy in textured aluminium alloys
15. Texture and anisotropy in Al-Li alloy 2195 plate and near-net-shape extrusions10.1016/S0921-5093(98)00834-X ↗
16. A new modeling framework for anisotropic yield strength of Al-Li alloy sheet with inhomogeneous plate-like T1 precipitates
17. Effect of different pre-treatments on anisotropy in stress relaxation aging behavior of AA2195 alloy10.1016/j.matchar.2022.112610 ↗
18. Compressive deformation behavior and microstructure evolution of AA2099 Al–Li alloy containing Al3Li precipitates based on experimental characterization and crystal plasticity finite element simulation10.1016/j.msea.2022.143644 ↗
19. On anisotropic tensile mechanical behavior of Al–Cu–Li AA2198 alloy under different ageing conditions10.1016/j.jmrt.2023.02.206 ↗
20. Effect of T1 precipitate on the anisotropy of Al-Li alloy 209010.1016/0956-7151(93)90028-Q ↗
21. Macro/micro-structure and mechanical properties of Al-6Mg-0.3Sc alloy fabricated by oscillating laser-arc hybrid additive manufacturing10.1016/j.jallcom.2022.167325 ↗
22. A comprehensive study on size-effect, plastic anisotropy and microformability of aluminum with varied alloy chemistry, crystallographic texture, and microstructure10.1016/j.msea.2023.145111 ↗
23. Research on anisotropy of the 7B50 super thick plate10.1016/j.jallcom.2023.171004 ↗
24. Yield strength anisotropy of steel sheet induced by grain shape and crystal anisotropy
25. Crystal plasticity finite element modeling of grain size and morphology effects on yield strength and extreme value fatigue response10.1016/j.jmrt.2022.06.075 ↗
26. Analysis of texture and grain shape effects on the yield anisotropy of Zr-2.5wt%Nb pressure tube alloy using crystal plasticity finite element method10.1016/j.jnucmat.2021.153112 ↗
27. Crystal plasticity evaluation of the effect of grain morphology on compressive deformation behavior of AA2099 Al-Li alloy10.1016/j.jmrt.2023.05.117 ↗
28. Achieving fully equiaxed grain microstructure and isotropic mechanical properties in wire arc additive-manufactured Mg-Y-Nd-Zr alloys10.1016/j.jallcom.2023.171041 ↗
29. The development of grain structure during axisymmetric extrusion of AA3003 aluminum alloys10.1007/s11661-015-3168-x ↗
30. Characterization of Al–Li 2099 extrusions and the influence of fiber texture on the anisotropy of static mechanical properties10.1016/j.msea.2013.12.060 ↗
31. Effect of extrusion parameters on microstructure, texture and mechanical property anisotropy of spray deposited 2195 Al–Li alloy profile10.1016/j.msea.2021.141406 ↗
32. An investigation on the anisotropic plastic behavior and forming limits of an Al-Mg-Li Alloy sheet10.1007/s11665-021-05981-0 ↗
33. Texture and anisotropy in cold rolled and recovery annealed AA 5182 sheets10.1179/1743284714Y.0000000671 ↗
34. Comparison of the effect of individual and combined Zr and Mn additions on the fracture behavior of Al-Cu-Li alloy AA2198 rolled sheet10.1007/s11661-013-2103-2 ↗
35. Superplasticity of 5083 alloys with Zr and Mn additions produced by reciprocating extrusion10.1016/j.msea.2007.01.121 ↗
36. Heterogeneous Zr solute segregation and Al3Zr dispersoid distributions in Al–Cu–Li alloys10.1016/j.actamat.2015.03.057 ↗
37. The effect of Mn and Zr dispersoid-forming additions on recrystallization resistance in Al–Cu–Li AA2198 sheet10.1016/j.actamat.2014.05.028 ↗
38. Effects of combined Zr and Mn additions on dispersoid formation and recrystallisation behaviour of AA2198 Sheet10.4028/www.scientific.net/AMR.89-91.568 ↗
39. Precipitation of Al3Zr by two-step homogenization and its effect on the recrystallization and mechanical property in 2195 Al-Cu-Li alloys10.1016/j.msea.2021.141637 ↗
40. Tracking the path of dislocations across ordered Al3Zr nano-precipitates in three dimensions10.1016/j.scriptamat.2013.09.014 ↗
41. Texture evolution and microstructural thermal stability of as-extruded AA2099 during hot deformation10.1016/j.msea.2016.08.052 ↗
42. Design of experiments to identify material properties10.1016/S0261-3069(00)00035-2 ↗
43. Anisotropy of elastic properties in various aluminium-lithium sheet alloys10.1016/1359-6454(95)00320-7 ↗
44. Influence of Zr content on microstructure and mechanical properties of As-cast Al-Zn-Mg-Cu alloy10.1016/j.jallcom.2021.158920 ↗
45. Texture evolution of hot tolled Al–Cu–Mg–Zr alloy during annealing10.1007/s12540-022-01186-9 ↗
46. Enhanced Brass texture of hot-rolled Al-4Cu-1.6Mg alloy by 0.1% Zr addition10.1016/j.matchar.2020.110643 ↗
47. Particle-stimulated nucleation and recrystallization texture initiated by coarsened Al2CuLi phase in Al–Cu–Li alloy10.1016/j.jmrt.2020.12.046 ↗
48. The deformation and recrystallization of particle-containing {011}<100> aluminium crystals10.1016/1359-6454(95)00432-7 ↗
49. Influence of Cu content on the hardenability of Al-xCu-1.1Li alloys10.1016/j.matchar.2022.112407 ↗
50. Microstructural design of high-strength aluminum alloys10.1361/105497198770341734 ↗
51. Heterogeneous precipitation of intermediate phases on Al3Zr particles in Al–Cu–Zr and Al–Li–Cu–Zr alloys10.2320/matertrans1989.32.445 ↗
52. A model for the yield strength of overaged Al–Zn–Mg–Cu alloys10.1016/S1359-6454(03)00363-X ↗
53. Strengthening mechanisms in ultrafine-grained and sub-grained high-purity aluminum10.1007/s11661-018-5007-3 ↗
54. A model for the effect of grain size on the yield stress of metals10.1080/01418618208236928 ↗
55. Effect of composition on crystallographic texture in hot-rolled Al-Li-Cu alloys10.1016/0921-5093(95)10064-4 ↗
56. Strengthening mechanisms associated with T1 particles in two Al-Li-Cu alloys10.1051/jphyscol:1987343 ↗