journal article·2023-12

Oxidation behavior of functionally graded cemented carbides with CoNiFeCr multi-principal-element alloy binder

Cheng Qian, Yong Liu, Xin Zhang, Kun Li, Huichao Cheng, Ji Zhang, Shuailong Zhang

Publisher page

Abstract

The oxidation behavior of the WC-CoNiFeCr functionally graded cemented carbide (FGCC) has been investigated by isothermal oxidation and composition characterization. The results showed that the oxidation of cemented carbide was closely related to the oxidation temperature and oxidation time, and the oxidation of different elements had a clear sequential order. The Cr element was first selectively oxidized to Cr 2O 3, followed by the oxidation of other composing elements of the multi-principal-element alloy (MPEA) binder to M xO y and MWO 4. The WC was then oxidized to WO 3, and WO 3 and M xO y were thereafter reacted to form MWO 4 . The binder composition, structural distribution, and WC grain size were the three key factors that affected the oxidation resistance of the cemented carbides. Fine-grained and graded cemented carbides, with CoNiFeCr MPEA binder, had the highest anti-oxidation properties. The FGCC showed lower oxidation of the binder at 600 °C, a denser MWO 4 distribution at 700 °C, and a smaller volume expansion at 800 °C, as compared with the non-graded cemented carbide (CC). Compared with the coarse-grained cemented carbide, the fine-grained cemented carbide had more grain boundaries between the WC and the binder, which resulted in a denser distribution of the binder oxides. WC-20CoNiFeCr had a higher energy barrier for the oxidation reaction and more stable oxidation products than WC-20Co. The results did not only provide theoretical guidance for the understanding of the anti-oxidation mechanism of WC-CoNiFeCr, but they also expanded a new approach for the preparation of cemented carbides with high oxidation resistance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Study on the preparation mechanism of novel WC-Cr2(C, N)-Co nanocomposites10.1016/j.jallcom.2023.169036 ↗
2. Wear resistance of ultra-coarse WC-WCoB-Co cemented carbide at different oxidation stages10.1016/j.ijrmhm.2022.105827 ↗
3. Influence mechanism of AlCoCrFeNi content on the wide temperature domain tribological properties of WC-based cemented carbides10.1016/j.ijrmhm.2023.106159 ↗
4. Effects of Cr2(C,N) addition on microstructure and comprehensive mechanical properties of ultrafine cemented carbide10.1016/j.msea.2023.144847 ↗
5. Study on strengthening mechanism and high temperature mechanical properties of Tic-Fe-HEA cemented carbide
6. Corrosion fatigue of cemented carbide cutting tool materials10.1016/j.msea.2003.08.057 ↗
7. High temperature oxidation and tribological properties of cemented carbide material under different cooling condition10.1016/j.ijrmhm.2022.105937 ↗
8. Corrosion behaviour of WC hardmetals with nickel-based binders10.1016/j.corsci.2018.11.015 ↗
9. The oxidation behavior of the WC–10wt% Ni3Al composite fabricated by spark plasma sintering10.1016/j.jallcom.2015.01.010 ↗
10. Research on the oxidation resistance and ultra-high frequency thermal fatigue shock failure mechanisms of the bilayer and multilayer nano-coatings on cemented carbide tools10.1016/j.ijrmhm.2022.106043 ↗
11. Fabrication of WC-Co/(Ti, W)C graded cemented carbide by spark plasma sintering10.1016/j.ijrmhm.2019.105141 ↗
12. High-temperature oxidation behaviour of vacuum hot-pressed WC-15 wt% Al2O3 composites10.1016/j.ceramint.2022.01.079 ↗
13. Effect of graphene and SiC whisker on the mechanical properties of WC-TiC-TiN-Al2O3 nanocomposites10.1016/j.jallcom.2022.168612 ↗
14. Oxidation behavior of ultrafine WC-based cemented carbides with AlxCoCrCuFeNi high-entropy alloy binders10.1016/j.ceramint.2020.11.217 ↗
15. Liquid phase sintering and oxidation resistance of WC–Ni–Co–Cr cemented carbides10.1016/j.ijrmhm.2010.02.010 ↗
16. Study on the oxidation of WC-Co cemented carbide under different conditions10.1016/j.ijrmhm.2020.105381 ↗
17. Effect of grain size on oxidation resistance of WC-6wt%Co cemented carbide sintered by spark plasma sintering10.1016/j.ijrmhm.2023.106108 ↗
18. Mechanism of the early stages of oxidation of WC–Co cemented carbides10.1016/j.corsci.2015.11.007 ↗
19. The selective oxidation behaviour of WC–Co cemented carbides during the early oxidation stage10.1016/j.corsci.2015.02.033 ↗
20. Oxidation of ultrafine-cemented carbide prepared from nanocrystalline WC–10Co composite powder10.1016/j.ceramint.2007.07.029 ↗
21. Effects of partial substitution of copper for cobalt on the microstructure and properties of ultrafine-grained WC-Co cemented carbides10.1016/j.jallcom.2017.11.006 ↗
22. Cemented carbide microstructures: a review10.1016/j.ijrmhm.2018.12.004 ↗
23. Grain growth behaviour and mechanical properties of coarse-grained cemented carbides with bimodal grain size distributions10.1016/j.msea.2020.140586 ↗
24. Growth of diamond coatings on functionally graded cemented carbides10.1016/j.ijrmhm.2014.11.010 ↗
25. Microstructural evolution and mechanical behaviors of graded cemented carbides10.1016/j.msea.2006.04.018 ↗
26. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
27. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced and ductility in a wide temperature range10.1016/j.actamat.2016.11.016 ↗
28. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
29. Oxidation behavior of arc melted AlCoCrFeNi multi-component high-entropy alloys10.1016/j.jallcom.2016.02.257 ↗
30. The role of Nb on the high temperature oxidation behavior of CoCrFeMnNbxNi high-entropy alloys10.1016/j.corsci.2019.07.012 ↗
31. Fabrication and characterization of WC-HEA cemented carbide based on the CoCrFeNiMn high entropy alloy10.1016/j.jallcom.2018.02.292 ↗
32. Wetting behaviors and interfacial characteristics of molten AlxCoCrCuFeNi high-entropy alloys on a WC substrate10.1016/j.jmst.2020.10.067 ↗
33. Development of Ti(C,N)-based cermets with (Co,Fe,Ni)-based high entropy alloys as binder phase
34. High entropy alloys: substituting for cobalt in cutting edge technology10.1016/j.apmt.2018.07.001 ↗
35. Role of binder phase on the microstructure and mechanical properties of a mechanically alloyed and spark plasma sintered WC-FCC HEA composites10.1016/j.jallcom.2021.160265 ↗
36. Microstructure and mechanical behavior of functionally graded cemented carbides with CoNiFeCr multi-principal-element alloy binder10.1016/j.ijrmhm.2022.106023 ↗
37. Effect of the carbon content on the morphology evolution of the η phase in cemented carbides with the CoNiFeCr high entropy alloy binder10.1016/j.ijrmhm.2021.105731 ↗
38. Fracture behavior of cemented carbides with CoNiFe medium entropy alloy binder10.1016/j.ijrmhm.2021.105547 ↗
39. The effect of carbon content on the microstructure and mechanical properties of cemented carbides with a CoNiFeCr high entropy alloy binder10.3390/ma15165780 ↗
40. Corrosion behavior of functionally graded cemented carbides with CoNiCrFe binder10.1016/j.corsci.2023.111383 ↗
41. Dependence of oxidation rate of WC powder on particle size10.1007/BF00547944 ↗
42. Comparison of the oxidation behaviour of WC–Co and WC–Ni–Co–Cr cemented carbides10.1016/j.corsci.2011.05.006 ↗
43. Kinetics of WC-Co oxidation accompanied by swelling10.1007/BF00351615 ↗
44. High-temperature oxidation behaviour of WC-FeAl composite fabricated by spark plasma sintering10.1016/j.ceramint.2018.06.168 ↗
45. Influence of WC replacement by TiC and (Ta,Nb)C on the oxidation resistance of Co-based cemented carbides10.1016/j.ijrmhm.2008.12.009 ↗
46. Oxidation of WC-TiC-TaC-Co hard materials at relatively low temperature10.1016/j.ijrmhm.2014.08.002 ↗
47. Grain size effect on wear resistance of WC-Co cemented carbides under different tribological conditions10.1016/j.jmst.2019.07.016 ↗
48. In-situ growth of nanowire WO2.72 on carbon cloth as a binder-free electrode for flexible asymmetric supercapacitors with high performance10.1016/j.jechem.2018.01.024 ↗
49. Effect of calcining process of APT on growth mechanisms of WO2.72 crystals
50. A study of oxidation behavior of AlTiN-and AlCrN-based multilayer coatings10.1016/j.surfcoat.2017.10.078 ↗
51. Remarkable improvement in high temperature oxidation resistance of WC-12Co by the addition of CrSi210.1016/j.ijrmhm.2021.105497 ↗
52. The oxidation of nickel—tungsten alloys10.1016/0010-938X(76)90033-0 ↗
53. Formation of multilayered scale during the oxidation of NiAl–Mo alloy10.1016/j.apsusc.2014.01.148 ↗
54. Oxidation of iron-molybdenum and nickel-molybdenum alloys10.1149/1.2429990 ↗
55. Engineering preparation of the nanocomposite containing CoWO4 nanodots and its high electrochemical activities10.1016/j.est.2023.107763 ↗
56. Nanosized CoWO4 and NiWO4 as efficient oxygen-evolving electrocatalysts10.1016/j.electacta.2016.05.042 ↗
57. Enhanced mechanical properties and oxidation resistance of tungsten carbide-cobalt cemented carbides with aluminum nitride additions10.1016/j.ceramint.2017.01.145 ↗
58. Comparison between oxidation kinetics of HVOF sprayed WC–12Co and WC–10Co–4Cr coatings10.1016/j.ijrmhm.2013.02.006 ↗
59. Non-isothermal oxidation kinetics of WC–6Co cemented carbides in air10.1016/j.ijrmhm.2013.02.003 ↗
60. Kinetics of isothermal oxidation of WC–20Co hot-pressed compacts in air10.1007/s10973-014-4044-4 ↗