Boosted mechanical properties of CoCr3Fe5Ni high entropy alloy via in-situ TiC particles
Source abstract
Abstract
High entropy alloys (HEAs) have recently aroused wide attention due to the outstanding mechanical properties. In this study, the in-situ TiC particles were introduced to CoCr 3Fe 5Ni HEA via vacuum induction smelting. Compared to the CoCr 3Fe 5 Ni matrix, the addition of 10 vol% TiC significantly enhances the mechanical properties of composite, resulting in a hardness increase of 22.9 %, yield strength increase of 30.5 % and ultimate strength increase of 23.0 %, reaching values of 358.0 HV, 401.3 MPa and 795.4 MPa, respectively. Although the elongation of the composite is sacrificed, the value of 17 % is still acceptable. It is revealed that through the incorporation of in-situ TiC particles, multiple strengthening mechanisms including load-bearing effect, dislocation strengthening and solid-solution strengthening contribute to boosting its mechanical properties.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Refractory high-entropy alloys fabricated using laser technologies: a concrete review10.1016/j.jmrt.2023.05.037 ↗
2. Recent advances in tribology of high entropy alloys: a critical review10.1016/j.pmatsci.2023.101106 ↗
3. Wear and corrosion behavior of high entropy alloys
4. A review on improving mechanical properties of high entropy alloy: interstitial atom doping10.1016/j.jmrt.2023.05.002 ↗
5. Design of advanced electrocatalysts for the high-entropy alloys: principle, progress, and perspective10.1016/j.jallcom.2023.170479 ↗
6. SLM Fe50Mn30Co10Cr10 metastable high entropy alloy with Al-Ti addition: synergizing strength and ductility10.1016/j.jallcom.2023.168830 ↗
7. High-entropy alloys10.1038/s41578-019-0121-4 ↗
8. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
9. Promising properties and future trend of eutectic high entropy alloys10.1016/j.scriptamat.2020.06.022 ↗
10. Lightweight, ultrastrong and high thermal-stable eutectic high-entropy alloys for elevated-temperature applications10.1016/j.actamat.2023.118806 ↗
11. Microstructure and properties of TiC/Fe24Ni24Co24Mn18 high-entropy composite with exceptionally low coercivity
12. Cracking behavior of newly-developed high strength eutectic high entropy alloy matrix composites manufactured by laser powder bed fusion10.1016/j.jmst.2023.05.003 ↗
13. Novel strength-electrical conductivity synergy in Cu-based composites reinforced with TiZrNbTa high entropy alloy10.1016/j.msea.2023.145210 ↗
14. The microstructure regulation and property enhancement of directed energy deposited Al-Zn-Mg-Cu alloy modified with fixed Si fraction and various TiC contents
15. Effect of TiC on microstructures and mechanical behaviors of low-density Nb-Ti-Al alloys fabricated by laser solid forming10.1016/j.ijrmhm.2022.105955 ↗
16. A novel high-entropy alloy composite coating with core-shell structures prepared by plasma cladding10.1016/j.vacuum.2020.109905 ↗
17. Effect of WC content on microstructures and mechanical properties of FeCoCrNi high-entropy alloy/WC composite coatings by plasma cladding10.1016/j.surfcoat.2019.125326 ↗
18. Microstructure and mechanical properties regulation and control of in-situ TiC reinforced CoCrFeNiAl0.2 high-entropy alloy matrix composites via high-gravity combustion route10.1016/j.jallcom.2021.163221 ↗
19. Effect of cooling rate upon the microstructure and mechanical properties of in-situ TiC reinforced high entropy alloy CoCrFeNi10.1016/j.jmst.2019.12.002 ↗
20. Effect of C addition on microstructure and mechanical properties of as-cast HEAs (Fe50Mn30Co10Cr10)100−xCx10.1016/j.matchemphys.2020.123501 ↗
21. Effect of C additions to the microstructure and wear behaviour of CoCrFeNi high-entropy alloy
22. Effect of Al additions on the microstructures and tensile properties of AlxCoCr3Fe5Ni high entropy alloys10.1016/j.matchar.2021.111091 ↗
23. Study of the plastic deformation mechanism of TRIP-TWIP high entropy alloys at the atomic level10.1016/j.ijplas.2019.102649 ↗
24. Effects of TiC mass fraction on microstructure, corrosive-wear and electrochemical properties of laser cladded CoCrFeNiMo high-entropy alloy coatings10.1016/j.triboint.2023.108640 ↗
25. Significant evolutions of microstructure and mechanical properties of Al0.3CoCrFeNiTix high-entropy alloys under annealing treatment10.1016/j.vacuum.2022.111350 ↗
26. Property evaluation of TixZrNbTaFeBy high entropy alloy coatings: effect of Ti and B contents10.1016/j.surfcoat.2022.128180 ↗
27. Tuning composition and microstructure by doping Ti and C for enhancing mechanical property and wear resistance of Al0.2Co1.5CrFeNi1.5Ti0.5 high entropy alloy matrix composites10.1016/j.jallcom.2020.155273 ↗
28. In situ TiC/FeCrNiCu high-entropy alloy matrix composites: reaction mechanism, microstructure and mechanical properties10.1007/s40195-020-01084-2 ↗
29. Effect of the amount of SiC particles on the microstructure, mechanical and wear properties of FeMnCoCr high entropy alloy composites10.1016/j.matchar.2022.112300 ↗
30. Microstructure and mechanical properties of in situ (TiC + SiC)/FeCrCoNi high entropy alloy matrix composites10.1007/s42243-020-00472-3 ↗
31. Si-addition contributes to overcoming the strength-ductility trade-off in high-entropy alloys10.1016/j.ijplas.2022.103443 ↗
32. Achieving excellent strength-ductility synergy via cold rolling-annealing in Al-containing refractory high-entropy alloys10.1016/j.ijrmhm.2023.106263 ↗
33. Effect of high temperature heat treatment on microstructure and properties of FeCoCrNiAl high-entropy alloy laser cladding layer10.1016/j.matchar.2022.112137 ↗
34. Microstructure and tribological behavior of CoCrFeNiMo0.2/SiC high-entropy alloy gradient composite coating prepared by laser cladding10.1016/j.surfcoat.2023.129681 ↗
35. Influence of V and Al in enhancing the strength and ductility of Co-rich high-entropy alloys10.1016/j.jallcom.2023.169745 ↗
36. Effect of WC addition on microstructure and properties of powder metallurgy CoCrNi medium entropy alloy
37. Strengthening mechanisms in high entropy alloys: a review
38. Synergistic strengthening of FeCrNiCo high entropy alloys via micro-TiC and nano-SiC particles
39. Phase formation and strengthening mechanisms in a dual-phase nanocrystalline CrMnFeVTi high-entropy alloy with ultrahigh hardness10.1016/j.jallcom.2018.02.029 ↗